IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This complements graphical-session.target for services which set up the
environment (e. g. dbus-update-activation-environment) and need to run before
the actual graphical session.
They were outdated, and this way it's less likely that they'll get out of sync
again. Anyway, it's easier for the reader to have the kernel and config file
options next to one another.
In this mode, messages from processes which are not part of the session
land in the main journal file, and only output of processes which are
properly part of the session land in the user's journal. This is
confusing, in particular because systemd-coredump runs outside of the
login session.
"Deprecate" SplitMode=login by removing it from documentation, to
discourage people from using it.
This unit acts as a dynamic "alias" target for any concrete graphical user
session like gnome-session.target; these should declare
"BindsTo=graphical-session.target" so that both targets stop and start at the
same time.
This allows services that run in a particular graphical user session (e. g.
gnome-settings-daemon.service) to declare "PartOf=graphical-session.target"
without having to know or get updated for all/new session types. This will
ensure that stopping the graphical session will stop all services which are
associated to it.
As suggested by @mbiebl we already use the "!" special char in unit file
assignments for negation, hence we should not use it in a different context for
privileged execution. Let's use "+" instead.
To "search something", in the meaning of looking for it, is valid,
but "search _for_ something" is much more commonly used, especially when
the meaning could be confused with "looking _through_ something"
(for some other object).
(C.f. "the police search a person", "the police search for a person".)
Also reword the rest of the paragraph to avoid using "automatically"
three times.
Not as many people use chroot as before, so make the flow a bit nicer by
talking less about chroot.
"change to the either" is awkward and unclear. Just remove that part,
because all changes are lost, period.
Clarify that "systemctl enable" can operate either on unit names or on unit
file paths (also, adjust the --help text to clarify this). Say that "systemctl
enable" on unit file paths also links the unit into the search path.
Many other fixes.
This should improve the documentation to avoid further confusion around #3706.
Let's not mention the supposed security benefit of turning off caching. It is
really questionnable, and I#d rather not create the impression that we actually
believed turning off caching would be a good idea.
Instead, mention that Cache=no is implicit if a DNS server on the local host is
used.
This adds a new boolean setting DynamicUser= to service files. If set, a new
user will be allocated dynamically when the unit is started, and released when
it is stopped. The user ID is allocated from the range 61184..65519. The user
will not be added to /etc/passwd (but an NSS module to be added later should
make it show up in getent passwd).
For now, care should be taken that the service writes no files to disk, since
this might result in files owned by UIDs that might get assigned dynamically to
a different service later on. Later patches will tighten sandboxing in order to
ensure that this cannot happen, except for a few selected directories.
A simple way to test this is:
systemd-run -p DynamicUser=1 /bin/sleep 99999
As it turns out 512 is max number of tasks per service is hit by too many
applications, hence let's bump it a bit, and make it relative to the system's
maximum number of PIDs. With this change the new default is 15%. At the
kernel's default pids_max value of 32768 this translates to 4915. At machined's
default TasksMax= setting of 16384 this translates to 2457.
Why 15%? Because it sounds like a round number and is close enough to 4096
which I was going for, i.e. an eight-fold increase over the old 512
Summary:
| on the host | in a container
old default | 512 | 512
new default | 4915 | 2457
Let's change from a fixed value of 12288 tasks per user to a relative value of
33%, which with the kernel's default of 32768 translates to 10813. This is a
slight decrease of the limit, for no other reason than "33%" sounding like a nice
round number that is close enough to 12288 (which would translate to 37.5%).
(Well, it also has the nice effect of still leaving a bit of room in the PID
space if there are 3 cooperating evil users that try to consume all PIDs...
Also, I like my bikesheds blue).
Since the new value is taken relative, and machined's TasksMax= setting
defaults to 16384, 33% inside of containers is usually equivalent to 5406,
which should still be ample space.
To summarize:
| on the host | in the container
old default | 12288 | 12288
new default | 10813 | 5406
This adds support for a TasksMax=40% syntax for specifying values relative to
the system's configured maximum number of processes. This is useful in order to
neatly subdivide the available room for tasks within containers.
This rearranges bootctl a bit, so that it uses the usual verbs parsing
routines, and automatically searches the ESP in /boot, /efi or /boot/efi, thus
increasing compatibility with mainstream distros that insist on /boot/efi.
This also adds minimal support for running bootctl in a container environment:
when run inside a container verification of the ESP via raw block device
access, trusting the container manager to mount the ESP correctly. Moreover,
EFI variables are not accessed when running in the container.
Let's make the EFI generator a bit smarter: if /efi exists it is used as mount
point for the ESP, otherwise /boot is used. This should increase compatibility
with distros which use legacy boot loaders that insist on having /boot as
something that isn't the ESP.
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8"
(which is for example the default in Debian), the file system becomes case
sensitive. This means that a file created as "FooBarBaz" cannot be accessed as
"foobarbaz" since those are then considered different files.
Moreover, a file created as "FooBar" can then also not be accessed as "foobar",
and it also prevents such a file from being created, as both would use the same
8.3 short name "FOOBAR".
Even though the UEFI specification [0] does give the canonical spelling for
the files mentioned above, not all implementations completely conform to that,
so it's possible that those files would already exist, but with a different
spelling, causing subtle bugs when scanning or modifying the ESP.
While the proper fix would of course be that everybody conformed to the
standard, we can work around this problem by just referencing the files by
their 8.3 short names, i.e. using upper case.
Fixes: #3740
[0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
* Specifying a device node has an effect much larger than a simple shortcut
for a field/value match, so the original sentence is no longer a good way
to start the paragraph.
* Specifying a device node causes matches to be generated for all ancestor
devices of the device specified, not just its parents.
* Indicates that the path must be absolute, but that it may be a link.
* Eliminates a few typos.
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories=
to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept
as aliases but they are not advertised in the documentation.
Renamed variables:
`read_write_dirs` --> `read_write_paths`
`read_only_dirs` --> `read_only_paths`
`inaccessible_dirs` --> `inaccessible_paths`
Despite the name, `Read{Write,Only}Directories=` already allows for
regular file paths to be masked. This commit adds the same behavior
to `InaccessibleDirectories=` and makes it explicit in the doc.
This patch introduces `/run/systemd/inaccessible/{reg,dir,chr,blk,fifo,sock}`
{dile,device}nodes and mounts on the appropriate one the paths specified
in `InacessibleDirectories=`.
Based on Luca's patch from https://github.com/systemd/systemd/pull/3327
The distinction between systemd-shutdown the binary vs system-shutdown
the hook directory (without the 'd') is not immediately obvious and can
be quite confusing if you are looking for a directory which doesn't exist.
Therefore explicitly mention the hook directory in the synopsis with a
trailing slash to make it clearer which is which.
