IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts PR #22587 and its follow-up commit. More specifically,
2299b1cae3 (partially),
e176f85527,
ceb46a31a0, and
51bb9076ab.
The PR was merged without final approval, and has several issues:
- OSS fuzz reported issues in the conf parser,
- It calls synchrnous netlink call, it should not be especially in PID1,
- The importance of NFTSet for CGroup and DynamicUser may be
questionable, at least, there was no justification PID1 should support
it.
- For networkd, it should be implemented with Request object,
- There is no test for the feature.
Fixes#23711.
Fixes#23717.
Fixes#23719.
Fixes#23720.
Fixes#23721.
Fixes#23759.
New directive `DynamicUserNFTSet=` provides a method for integrating
configuration of dynamic users into firewall rules with NFT sets.
Example:
```
table inet filter {
set u {
typeof meta skuid
}
chain service_output {
meta skuid != @u drop
accept
}
}
```
```
/etc/systemd/system/dunft.service
[Service]
DynamicUser=yes
DynamicUserNFTSet=inet:filter:u
ExecStart=/bin/sleep 1000
[Install]
WantedBy=multi-user.target
```
```
$ sudo nft list set inet filter u
table inet filter {
set u {
typeof meta skuid
elements = { 64864 }
}
}
$ ps -n --format user,group,pid,command -p `pgrep sleep`
USER GROUP PID COMMAND
64864 64864 55158 /bin/sleep 1000
```
* Avoid traling slash as most links are defined without.
* Always use https:// protocol and www. subdomain
Allows for easier tree-wide linkvalidation
for our migration to systemd.io.
Backward incompatible change to avoid returning 'skipped' if a condition causes
a job activation to be skipped when using StartUnitWithFlags().
Job results are broadcasted, so it is theoretically possible that existing
software could get confused if they see this result.
Replaces https://github.com/systemd/systemd/pull/22369
When writing docs for SD_BUS_VTABLE_CAPABILITY, I noticed that we have one use
of SD_BUS_VTABLE_CAPABILITY(CAP_SYS_ADMIN) in the tree. This is the default, so
it's not very useful to specify it. But if we're touching that, I think it's
better to use mac + polkit for this like for everything else.
We don't have a very good category for this, but I don't think it makes sense
to add a new one. I just reused the same as other similar calls.
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.
The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
Add a new setting that follows the same principle and implementation
as ExtensionImages, but using directories as sources.
It will be used to implement support for extending portable images
with directories, since portable services can already use a directory
as root.
When an activation job is skipped because of a Condition*= setting failing,
currently the JobRemoved signal lists 'done' as the result, just as with
a successful job.
This is a problem when doing dbus activation: dbus-broker will receive a
signal that says the job was successful, so then it moves into a state where
it waits for the requested name to appear on the bus, but that never happens
because the job was actually skipped.
Add a new StartUnitWithFlags that changes the behaviour of the JobRemoved
signal to list 'done' or 'skipped'.
Fixes#21520
This introduces `ExitType=main|cgroup` for services.
Similar to how `Type` specifies the launch of a service, `ExitType` is
concerned with how systemd determines that a service exited.
- If set to `main` (the current behavior), the service manager will consider
the unit stopped when the main process exits.
- The `cgroup` exit type is meant for applications whose forking model is not
known ahead of time and which might not have a specific main process.
The service will stay running as long as at least one process in the cgroup
is running. This is intended for transient or automatically generated
services, such as graphical applications inside of a desktop environment.
Motivation for this is #16805. The original PR (#18782) was reverted (#20073)
after realizing that the exit status of "the last process in the cgroup" can't
reliably be known (#19385)
This version instead uses the main process exit status if there is one and just
listens to the cgroup empty event otherwise.
The advantages of a service with `ExitType=cgroup` over scopes are:
- Integrated logging / stdout redirection
- Avoids the race / synchronisation issue between launch and scope creation
- More extensive use of drop-ins and thus distro-level configuration:
by moving from scopes to services we can have drop ins that will affect
properties that can only be set during service creation,
like `OOMPolicy` and security-related properties
- It makes systemd-xdg-autostart-generator usable by fixing [1], as obviously
only services can be used in the generator, not scopes.
[1] https://bugs.kde.org/show_bug.cgi?id=433299
When combined with a tmpfs on /run or /var/lib, allows to create
arbitrary and ephemeral symlinks for StateDirectory or RuntimeDirectory.
This is especially useful when sharing these directories between
different services, to make the same state/runtime directory 'backend'
appear as different names to each service, so that they can be added/removed
to a sharing agreement transparently, without code changes.
An example (simplified, but real) use case:
foo.service:
StateDirectory=foo
bar.service:
StateDirectory=bar
foo.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:foo
bar.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:bar
foo and bar use respectively /var/lib/foo and /var/lib/bar. Then
the orchestration layer decides to stop this sharing, the drop-in
can be removed. The services won't need any update and will keep
working and being able to store state, transparently.
To keep backward compatibility, new DBUS messages are added.
Let's make our service managers slightly less likely to be killed by the
OOM killer by adjusting our services' OOM score adjustment to 100 above
ours. Do this conservatively, i.e. only for regular user sessions.
It's not "const", it can change any time if people change the fs, and we
don#t send out notifications for it. Hence don't claim it was const.
(Otherwise clients might cache it, but they should not)
Prompted-by: #20792
Currently there does not exist a way to specify a path relative to which
all binaries executed by Exec should be found. The only way is to
specify the absolute path.
This change implements the functionality to specify a path relative to which
binaries executed by Exec*= can be found.
Closes#6308
This reverts commit cb0e818f7c.
After this was merged, some design and implementation issues were discovered,
see the discussion in #18782 and #19385. They certainly can be fixed, but so
far nobody has stepped up, and we're nearing a release. Hopefully, this feature
can be merged again after a rework.
Fixes#19345.
Try to infer the unused memory that a unit can claim before the
memory.max limit is reached, including any limit set on any parent
slice above the unit itself.
This is similar to OnFailure= but is activated whenever a unit returns
into inactive state successfully.
I was always afraid of adding this, since it effectively allows building
loops and makes our engine Turing complete, but it pretty much already
was it was just hidden.
Given that we have per-unit ratelimits as well as an event loop global
ratelimit I feel safe to add this finally, given it actually is useful.
Fixes: #13386
This takes inspiration from PropagatesReloadTo=, but propagates
stop jobs instead of restart jobs.
This is defined based on exactly two atoms: UNIT_ATOM_PROPAGATE_STOP +
UNIT_ATOM_RETROACTIVE_STOP_ON_STOP. The former ensures that when the
unit the dependency is originating from is stopped based on user
request, we'll propagate the stop job to the target unit, too. In
addition, when the originating unit suddenly stops from external causes
the stopping is propagated too. Note that this does *not* include the
UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT atom (which is used by BoundBy=),
i.e. this dependency is purely about propagating "edges" and not
"levels", i.e. it's about propagating specific events, instead of
continious states.
This is supposed to be useful for dependencies between .mount units and
their backing .device units. So far we either placed a BindsTo= or
Requires= dependency between them. The former gave a very clear binding
of the to units together, however was problematic if users establish
mounnts manually with different block device sources than our
configuration defines, as we there might come to the conclusion that the
backing device was absent and thus we need to umount again what the user
mounted. By combining Requires= with the new StopPropagatedFrom= (i.e.
the inverse PropagateStopTo=) we can get behaviour that matches BindsTo=
in every single atom but one: UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT is
absent, and hence the level-triggered logic doesn't apply.
Replaces: #11340
Let's add an implicit reverse dep OnFailureOf=. This is exposed via the
bus to make things more debuggable: you can now ask systemd for which
units a specific unit is the failure handler.
OnFailure= was the only dependency type that had no inverse, this fixes
that.
Now that deps are a bit cheaper, it should be OK to add deps that only
serve debug purposes.
The slice a unit is assigned to is currently a UnitRef reference. Let's
turn it into a proper dependency, to simplify and clean up code a bit.
Now that new dep types are cheaper, deps should generally be preferable
over everything else, if the concept applies.
This brings one major benefit: we often have to iterate through all unit
a slice contains. So far we iterated through all Before= dependencies of
the slice unit to achieve that, filtering out unrelated units, and
taking benefit of the fact that slice units are implicitly ordered
Before= the units they contain. By making Slice= a proper dependency,
and having an accompanying SliceOf= dependency type, this is much
simpler and nicer as we can directly enumerate the units a slice
contains.
The forward dependency is actually called InSlice internally, since we
already used the UNIT_SLICE name as UnitType field. However, since we
don't intend to expose the dependency to users as dep anyway (we already
have the regular Slice D-Bus property for this) this shouldn't matter.
The SliceOf= implicit dependency type (the erverse of Slice=/InSlice=)
is exported over the bus, to make things a bit nicer to debug and
discoverable.
- Handle BPFProgram= property in string format
"<bpf_attach_type>:<bpffs_path>", e.g. egress:/sys/fs/bpf/egress-hook.
- Add dbus getter to list foreign bpf programs attached to a cgroup.
So far OOMD limits used permyriads, as an upgrade from the original
percent.
The rest of our codebase typically scales stuff relative to UINT32_MAX.
Let's clean this up, an make sure this happens here too. This is
particularly relevant, as this is exposed in unit files and API, and
before we mark this stable we should get the APIs right.
