IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The current code is not compatible with current dkr protocols anyway,
and dkr has a different focus ("microservices") than nspawn anyway
("whole machine containers"), hence drop support for it, we cannot
reasonably keep this up to date, and it creates the impression we'd
actually care for the microservices usecase.
Fixes:
$ ./configure ... --disable-microhttpd --enable-libcurl
--enable-sysusers
$ make && make install DESTDIR=$(pwd)/INST
$ ls INST/usr/lib/sysusers.d/
basic.conf systemd.conf
There is no a file with `systemd-journald-upload`
util-linux 2.27.1's configure.ac still claims to be 2.27.0, which breaks our
version check. Lower it back to 2.27.0 until util-linux gets a fixed tarball.
See #1754
util-linux 2.27.1 now entirely stops looking at /etc/mtab, so we don't need to
verify /etc/mtab during early boot any more. Later on, tmpfiles.d/etc.conf will
fix /etc/mtab anyway, so there's not even a point in warning about it.
Drop test_mtab() and bump the util-linux dependency to >= 2.17.1.
Fixes#1495
--enable-lz4 can be used to force lz4 requirement,
--disable-lz4 can be used to skip lz4 support even if available.
Also, make surrounding checks for bzip2, xz, and zlib similar in structure.
This fixes the check for requested but missing bzip2.
The intent of the assignments around the check for libcap was obviously
to avoid polluting LIBS. To work properly, LIBS must be restored from
the save_LIBS variable.
The practical effect is small though, because pretty much everything
links with libbasic, which links with CAP_LIBS.
We have two AC_CHECK_LIB checks for libdw. The first one has an empty
action-if-found, so it defaults to adding "-ldw" to LIBS. LIBS are
applied to everything we build. But only systemd-coredump needs libdw.
It already links to ELFUTILS_LIBS correctly in Makefile.am.
Drop the first AC_CHECK_LIB check. The second check is sufficient.
Q: Don't we already use "-Wl,--as-needed" to eliminate overlinking?
A: We do, but it is effective only for executables, not for shared
libraries. This is due to a libtool bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=347650
This adds support for caching harddisk passwords in the kernel keyring
if it is available, thus supporting caching without Plymouth being
around.
This is also useful for hooking up "gdm-auto-login" with the collected
boot-time harddisk password, in order to support gnome keyring
passphrase unlocking via the HDD password, if it is the same.
Any passwords added to the kernel keyring this way have a timeout of
2.5min at which time they are purged from the kernel.
If gcrypt's m4 macro files aren't installed, with this change, gcrypt
will be disabled --- unless gcrypt support was explicitly requested by
passing --enable-gcrypt to configure, in which case it will fail.
Without this change, autoconf would fail either way with not being able
to resolve AM_PATH_LIBGCRYPT.
What is the rationale to have AC_FUNC_MALLOC? It does not actually
abort the configure run if an "unsuitable" malloc was found, and
instead just replaces malloc by rpl_malloc, for which systemd however
has no definition, either.
Remove the call.
gcc versions 4.6 and earlier used to complain when a local variable
shadows a global function, 4.7 and above only complain if a local
variable shadows a global variable.
Fix this by checking whether gcc 4.7+ behavior is in place before
deciding to use -Werror=shadow in $(CFLAGS), by using a custom test
program source that shadows a global function with a local variable and
confirming that -Werror=shadow does not make the compile to break.
Tested:
- On gcc 4.7 and 4.8, confirmed nothing changed (other than the order of
the -Werror=shadow argument, going to the end of CFLAGS.)
- On gcc 4.6, confirmed by looking at the config.log output that the
check for -Werror=shadow failed and it was not included in CFLAGS.
- Ran `make V=1` to confirm -Werror=shadow was still in use, introduced
a bogus shadowing issue and confirmed it was caught when building with
a recent gcc.
The current implementation directly monitor /proc/self/mountinfo and
/run/mount/utab files. It's really not optimal because utab file is
private libmount stuff without any official guaranteed semantic.
The libmount since v2.26 provides API to monitor mount kernel &
userspace changes and since v2.27 the monitor is usable for
non-root users too.
This patch replaces the current implementation with libmount based
solution.
Signed-off-by: Karel Zak <kzak@redhat.com>
/etc/mtab should be labeled as "_", even though systemd has its own
smack label using '--with-smack-run-label' configuration. This is mainly
because all processes could read that file and the origin of this file
(i.e. /proc/mounts) is labeled as "_". This labels /etc/mtab as "_" when
'--with-smack-run-label' is enabled.
AC_CHECK_FILE fails when cross-compiling. It is intended to be used to
check for files that are used at runtime during build time (e.g.
/etc/passwd, /dev/*) [1]. For files which are only used at build time
'test -f' is sufficient.
[1]: https://lists.gnu.org/archive/html/autoconf/2000-10/msg00018.html
This drops the libsystemd-terminal and systemd-consoled code for various
reasons:
* It's been sitting there unfinished for over a year now and won't get
finished any time soon.
* Since its initial creation, several parts need significant rework: The
input handling should be replaced with the now commonly used libinput,
the drm accessors should coordinate the handling of mode-object
hotplugging (including split connectors) with other DRM users, and the
internal library users should be converted to sd-device and friends.
* There is still significant kernel work required before sd-console is
really useful. This includes, but is not limited to, simpledrm and
drmlog.
* The authority daemon is needed before all this code can be used for
real. And this will definitely take a lot more time to get done as
no-one else is currently working on this, but me.
* kdbus maintenance has taken up way more time than I thought and it has
much higher priority. I don't see me spending much time on the
terminal code in the near future.
If anyone intends to hack on this, please feel free to contact me. I'll
gladly help you out with any issues. Once kdbus and authorityd are
finished (whenever that will be..) I'll definitely pick this up again. But
until then, lets reduce compile times and maintenance efforts on this code
and drop it for now.
While 235c6e6 gets LTO builds running again, it goes back to using fat
LTO objects instead of using gcc-{ar,nm,ranlib}. Building these fat
objects takes significantly more time.
Use the suggested solution and look for gcc-{ar,nm,ranlib}, which launch
the binutils tools with the appropriate --plugin parameter. GCC versions
that do not ship these should either default to -ffat-lto-objects or do
not support LTO at all.
On another note, nm from binutils 2.25 seems to be smart enough to load
the LTO plugin when needed without having to specify --plugin.
Similar to SmackProcessLabel=, if this configuration is set, systemd
executes processes with given SMACK label. If unit has
SmackProcessLabel=, this config is overwritten.
But, do NOT be confused with SMACK64EXEC of execute file. This default
execute process label(and also label which is set by
SmackProcessLabel=) is set fork-ed process SMACK subject label and
used to access the execute file.
If the execution file has also SMACK64EXEC, finally executed process
has SMACK64EXEC subject.
While if the execution file has no SMACK64EXEC, the executed process
has label of this config(or label which is set by
SmackProcessLabel=). Because if execution file has no SMACK64EXEC then
excuted process inherits label from caller process(in this case, the
caller is systemd).
Currently, 'make distcheck' fails with an error such as this:
srcdir=../../po /usr/bin/intltool-update -m
The following files contain translations and are currently not in use.
Please consider adding these to the POTFILES.in file, located in the po/ directory.
build2/src/core/org.freedesktop.systemd1.policy.in
build3/src/core/org.freedesktop.systemd1.policy.in
[...]
This is caused by a new behavior of autmake 1.15 which changed the
location of the build tree during 'make distcheck', and the fact that
intltool doesn't yet ignore that paths.
We used to have a workaround in configure.ac that makes the failing call
a no-op, but it was accidentially removed in 23756070
("remove gudev and gtk-doc").
Bring back that snipet for now, until intltool and automake sorted out
their issues and like each other again.
Also see
https://bugs.launchpad.net/intltool/+bug/1117944
./configure --enable/disable-kdbus can be used to set the default
behavior regarding kdbus.
If no kdbus kernel support is available, dbus-dameon will be used.
With --enable-kdbus, the kernel command line option "kdbus=0" can
be used to disable kdbus.
With --disable-kdbus, the kernel command line option "kdbus=1" is
required to enable kdbus support.
