IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now that the random seed is used on virtualized systems, there's no
point in having a random-seed-mode toggle switch. Let's just always
require it now, with the existing logic already being there to allow not
having it if EFI itself has an RNG. In other words, the logic for this
can now be automatic.
Adding Microsoft keys by default is recommended because firmware drivers
might be signed by it.
This also changes the file ending from .esl to .auth as that is used by
sign-efi-sig-list manpage and other sources.
***DANGER*** NOTE ***DANGER***
This feature might result in your device becoming soft-brick as outlined
below, please use this feature carefully.
***DANGER*** NOTE ***DANGER***
If secure-boot-enrollment is set to no, then no action whatsoever is performed,
no matter the files on the ESP.
If secure boot keys are found under $ESP/loader/keys and secure-boot-enrollment
is set to either manual or force then sd-boot will generate enrollment entries
named after the directories they are in. The entries are shown at the very bottom
of the list and can be selected by the user from the menu. If the user selects it,
the user is shown a screen allowing for cancellation before a timeout. The enrollment
proceeds if the action is not cancelled after the timeout.
Additionally, if the secure-boot-enroll option is set to 'force' then the keys
located in the directory named 'auto' are going to be enrolled automatically. The user
is still going to be shown a screen allowing them to cancel the action if they want to,
however the enrollment will proceed automatically after a timeout without
user cancellation.
After keys are enrolled, the system reboots with secure boot enabled therefore, it is
***critical*** to ensure that everything needed for the system to boot is signed
properly (sd-boot itself, kernel, initramfs, PCI option ROMs).
This feature currently only allows loading the most simple set of variables: PK, KEK
and db.
The files need to be prepared with cert-to-efi-sig-list and then signed with
sign-efi-sig-list.
Here is a short example to generate your own keys and the right files for
auto-enrollement.
`
keys="PK KEK DB"
uuid="{$(systemd-id128 new -u)}"
for key in ${keys}; do
openssl req -new -x509 -subj "/CN=${key}/ -keyout "${key}.key" -out "${key}.crt"
openssl x509 -outform DER -in "${key}.crt" -out "${key}.cer"
cert-to-efi-sig-list -g "${uuid}" "${key}.crt" "${key}.esl.nosign"
done
sign-efi-sig-list -c PK.crt -k PK.key PK PK.esl.nosign PK.esl
sign-efi-sig-list -c PK.crt -k PK.key KEK KEK.esl.nosign KEK.esl
sign-efi-sig-list -c KEK.crt -k KEK.key db db.esl.nosign db.esl
`
Once these keys are enrolled, all the files needed for boot ***NEED*** to be signed in
order to run. You can sign the binaries with the sbsign tool, for example:
`
sbsign --key db.key --cert db.crt bzImage --output $ESP/bzImage
`
Example:
Assuming the system has been put in Setup Mode:
`
$ESP/loader/keys/auto/db.esl
$ESP/loader/keys/auto/KEK.esl
$ESP/loader/keys/auto/PK.esl
$ESP/loader/keys/Linux Only/db.esl
$ESP/loader/keys/Linux Only/KEK.esl
$ESP/loader/keys/Linux Only/PK.esl
$ESP/loader/keys/Linux and Windows/db.esl
$ESP/loader/keys/Linux and Windows/KEK.esl
$ESP/loader/keys/Linux and Windows/PK.esl
`
If auto-enroll is set, then the db, KEK and then PK are enrolled from the 'auto'
directory.
If not, three new boot entries are available to the user in order to enroll either the
'Linux Only', 'Linux And Windows' or 'auto' set of keys.
A future commit will add support for unicode collation protocol that
allows case folding and comparing strings with locale awareness. But it
only operates on whole strings, so fnmatch cannot use those without a
heavy cost. Instead we just case fold the patterns instead (the IDs we
try to match are already lower case).
So (maybe weirdly) loader.conf(5) documents both loader.conf and type #1
entries (because they share a similar syntax). But it then only lists
the options of loader.conf. Let's add an explicit hint where to find
the documentation of the type #1 entries.
Conceptually the feature is great and should exist, but in its current
form should be worked to be generic (i.e. not specific to
Windows/Bitlocker, but appliable to any boot entry), not be global (but
be a per-entry thing), not require a BootXXXX entry to exist, and not
check for the BitLocker signature (as TPMs are not just used for
BitLocker).
Since we want to get 251 released, mark it in the documentation, in NEWS
and in code as experimental and make clear it will be reworked in a
future release. Also, make it opt-in to make it less likely people come
to rely on it without reading up on it, and understanding that it will
likely change sooner or later.
Follow-up for: #22043
See: #22390
This is useful if the auto-firmware setting has been disabled. The
keys used here are based on what the majority of firmware employ in
the wild.
This also ensures there's a chance for the user to discover this in
case they were too slow during POST or simply used the wrong ones.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
