IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixes#4871.
The new libmount has two changes relevant for us:
- x-* options are propagated to /run/mount/utab and are visible through
libmount (fixes#4817).
- umount -c now really works (partially solves #6115).
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
Seems to be some kind of confusion in gcc. Insteading of playing whack-a-mole and
adding work-arounds in code, let's adjust the compilation options instead.
Fixes#6119, replaces #6657.
some run_target() calls were using params from custom_target()
example message:
WARNING: Passed invalid keyword argument "input". This will become a hard error in the future.
New way to call targets:
ninja man/man
ninja man/html
ninja man/update-man-rules
This changes the symbolic name for the default gateway from "gateway" to
"_gateway". A new configuration option -Dcompat-gateway-hostname=true|false
is added. If it is set, the old name is also supported, but the new name
is used as the canonical name in either case. This is intended as a temporary
measure to make the transition easier, and the option should be removed
after a few releases, at which point only the new name will be used.
The old "gateway" name mostly works OK, but hasn't gained widespread acceptance
because of the following (potential) conflicts:
- it is completely legal to have a host called "gateway"
- there is no guarantee that "gateway" will not be registered as a TLD, even
though this currently seems unlikely. (Even then, there would be no
conflict except for the case when the top-level domain itself was being resolved.
The "gateway" or "_gateway" labels have only special meaning when the
whole name consists of a single label, so resolution of any subdomain
of the hypothetical gateway. TLD would still work OK. )
Moving to "_gateway" avoids those issues because underscores are not allowed
in host names (RFC 1123, §2.1) and avoids potential conflicts with local or
global names.
v2:
- simplify the logic to hardcode "_gateway" and allow
-Dcompat-gateway-hostname=true as a temporary measure.
This was done autogen.sh previously and was dropped in
72cdb3e783. Let's add it back.
The meson configuration step is the only reasonable place.
Note that this only works for the most standard git dirs, e.g.
the hook will not be installed if git worktree is used or if
$GIT_DIR is specified, etc. I think that's OK because most of
the time meson will be run at least once in the original cloned
dir.
This makes it more like other configure defines.
Also, it fixes meson status output which was looking for HAVE_ and ENABLE_
prefixes only (the define under meson was OK, just the summary message was
wrong.)
This is just the meson part, no functional change.
Use meson -D slow-tests=yes to set the default,
or SYSTEMD_SLOW_TESTS=yes build/test-foobar for just one test.
Setting the default is more useful for installed tests.
This is a squash of casync commits
02fbbdb2b9
(by Silvio Fricke)
and b687a94b1e.
Instead of checking during every meson config whether etags are
available, just try to call them and error out if not. This has
the advantage that the target is always available (if git is installed),
and the error message gives a hint what needs to be installed.
The naming is confusing, but etags(1) is pretty clear:
- emacs expects TAGS file in etags format
- vi expects tags file in ctags format
and automake docs are pretty clear too:
- tags target generates TAGS file
- ctags target generates tags file
If wanted, the linker can be set with LDFLAGS (LDFLAGS=-Wl,-fuse-ld=gold meson ...),
and setting it internally was interfering with that. It seems that both gold and
bfd work very well and quick, and the reasons we had to prefer gold are not relevant
anymore.
Fixes#6169.
Always install all tests if install-tests is set to true, as they might
be useful for CI. This includes manual and unsafe tests. Install those
in subdirectories of /usr/lib/systemd/tests.
Fixes#6163.
Three binaries would fail to link when ld.bfd was used and link-udev-shared was
false. Add -pthreads (again) to the failing binaries and synchronize the
dependency list between libsystemd-shared .a and .so versions.
Apart from allowing the build to succeed, this shouldn't have much effect becuase
systemd-networkd was already using pthreads.
Fixes#5828.
The TAGS file was generated in build/ following what autotools did.
Nevertheless, it's more convenient to put in the source dir.
(It doesn't get deleted by mistake, and it's easier to find for the
editor.)
This test is mostly a compilation test that checks that various defines in
sd-bus-vtable.h are valid C++. The code is executed, but the results are not
checked (apart from sd-bus functions not returning an error). test-bus-objects
contains pretty extensive tests for this functionality.
The C++ version is only added to meson, since it's simpler there.
Because of the .cc extension, meson will compile the executable with c++.
This test is necessary to properly check the macros in sd-bus-vtable.h. Just
running the headers through g++ is not enough, because the macros are not
exercised.
Follow-up for #5941.
If we could not communicate with systemd-resolved, we would call into
libnss_dns. libnss_dns would return NOTFOUND for stuff like "localhost" and
other names resolved by nss-myhostname, which we would fall under the !UNAVAIL=
condition and cause resolution to fail. So the following recommended
configuration in nsswitch.conf would not work:
hosts: resolve [!UNAVAIL=return] dns myhostname
Remove the internal fallback code completely so that the fallback logic
can be configured in nsswitch.conf.
Tested with
hosts: resolve [!UNAVAIL=return] myhostname
and
hosts: resolve [!UNAVAIL=return] dns myhostname
Fixes#5742.
libidn2 2.0.0 supports IDNA2008, in contrast to libidn which supports IDNA2003.
https://bugzilla.redhat.com/show_bug.cgi?id=1449145
From that bug report:
Internationalized domain names exist for quite some time (IDNA2003), although
the protocols describing them have evolved in an incompatible way (IDNA2008).
These incompatibilities will prevent applications written for IDNA2003 to
access certain problematic domain names defined with IDNA2008, e.g., faß.de is
translated to domain xn--fa-hia.de with IDNA2008, while in IDNA2003 it is
translated to fass.de domain. That not only causes incompatibility problems,
but may be used as an attack vector to redirect users to different web sites.
v2:
- keep libidn support
- require libidn2 >= 2.0.0
v3:
- keep dns_name_apply_idna caller dumb, and keep the #ifdefs inside of the
function.
- use both ±IDN and ±IDN2 in the version string
Some distros (openSUSE) don't have group shadow support enabled. This can lead
to the following error:
# systemd-sysusers
Creating group foofoo with gid 478.
# systemd-sysusers
# groupdel foofoo
# systemd-sysusers
Creating group foofoo with gid 478.
Failed to write files: File exists
This patch adds --disable-gshadow option to configure. If used,
systemd-sysvusers won't consider /etc/gshadow.
Any call to set/query/use the log level in the code with LOG_REALM=LOG_REALM_UDEV
refers to log_max_level[1]. In particular this means that systemd code using
the libudev library uses does not set the log level for log calls done in libudev.
Fixes#4525.
v2:
- also update meson's meson.build
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
This is similar to what ./configure prints. Instead of a long list of yes/no lines,
I added two lines at the end with "enabled features" and "disabled features".
This is what the mplayer/mencoder ./configure script did back in the day.
The advantage is that it's easy to look at the list of disabled features
and check for any unexpected entries.
```
[107/1793] Compiling c object 'src/basic/basic@sta/log.c.o'
In file included from ../src/basic/log.c:44:0:
../src/basic/missing.h:762:6: warning: "HAVE_DECL_IFLA_GENEVE_LABEL" is not defined, evaluates to 0 [-Wundef]
^~~~~~~~~~~~~~~~~~~~~~~~~~~
[108/1793] Compiling c object 'src/basic/basic@sta/path-util.c.o'
In file included from ../src/basic/path-util.c:40:0:
../src/basic/missing.h:762:6: warning: "HAVE_DECL_IFLA_GENEVE_LABEL" is not defined, evaluates to 0 [-Wundef]
^~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Previous checks did nothing, because cc.has_argument only does compilation,
without any linking. Unfortunately cc.links() cannot be used, because it does
not accept any options. Providing the test file as a static source is easiest,
even if not every elegant.
https://github.com/mesonbuild/meson/issues/1676
