IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Moving all of the gnu-efi detection into src/boot/efi/meson.build makes
more sense than having it partially split.
And thanks to subdir_done() we can simplify the code a lot.
Fixes: #21258
Getting the variable directly from pkg-config (without
adding the sysroot prefix) is prone to host contamination
when building in sysroots as the compiler starts looking for the
headers on the host in addition to the sysroot.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
This adds support for dm integrity targets and an associated
/etc/integritytab file which is required as the dm integrity device
super block doesn't include all of the required metadata to bring up
the device correctly. See integritytab man page for details.
glibc 2.30 (Aug 2019) added a wrapper for getdents64(). For older
versions let's define our own.
(This syscall exists since Linux 2.4, hence should be safe to use for
us)
In upstream, we have a linearly-growing list of net-naming-scheme defines;
we add a new one for every release where we make user-visible changes to the
naming scheme.
But the general idea was that downstream distributions could define their
own combinations (or even just their own names for existing combinations),
so provide stability for their users. So far this required patching of the
netif-naming-scheme.c and .h files to add the new lines.
With this patch, patching is not required:
$ meson configure build \
-Dextra-net-naming-schemes=gargoyle=v238+npar_ari+allow_rerenames,gargoyle2=gargoyle+nspawn_long_hash \
-Ddefault-net-naming-scheme=gargoyle2
or even
$ meson configure build \
-Dextra-net-naming-schemes=gargoyle=v238+npar_ari+allow_rerenames,gargoyle2=gargoyle+nspawn_long_hash,latest=v249 \
-Ddefault-net-naming-scheme=gargoyle2
The syntax is a comma-separated list of NAME=name+name+…
This syntax is a bit scary, but any typos result in compilation errors,
so I think it should be OK in practice.
With this approach, we don't allow users to define arbitrary combinations:
what is allowed is still defined at compilation time, so it's up to the
distribution maintainers to provide reasonable combinations. In this regard,
the only difference from status quo is that it's much easier to do (and harder
to do incorrectly, for example by forgetting to add a name to one of the
maps).
We used 'combo' type for the scheme list. For a while we forgot to add
new names, and recently aa0a23ec86 added v241, v243, v245, and v247.
I want to allow defining new values during configuration, which means
that we can't use meson to verify the list of options. So any value is
allowed, but then two tests are added: one that will fail compilation if some
invalid name is given (other than "latest"), and one that converts
DEFAULT_NET_NAMING_SCHEME to a NamingScheme pointer.
Before:
```
Compiling C object src/libsystemd-network/libsystemd-network.a.p/dhcp6-option.c.o
../src/libsystemd-network/dhcp6-option.c: In function ‘dhcp6_option_parse_ia’:
../src/libsystemd-network/dhcp6-option.c:633:70: warning: passing argument 3 of ‘dhcp6_option_parse’ makes pointer from integer without a cast [-Wint-conversion]
633 | r = dhcp6_option_parse(option_data, option_data_len, offset, &subopt, &subdata_len, &subdata);
| ^~~~~~
| |
| size_t {aka long unsigned int}
../src/libsystemd-network/dhcp6-option.c:358:25: note: expected ‘size_t *’ {aka ‘long unsigned int *’} but argument is of type ‘size_t’ {aka ‘long unsigned int’}
358 | size_t *offset,
| ~~~~~~~~^~~~~~
```
After:
```
../src/libsystemd-network/dhcp6-option.c: In function ‘dhcp6_option_parse_ia’:
../src/libsystemd-network/dhcp6-option.c:633:70: error: passing argument 3 of ‘dhcp6_option_parse’ makes pointer from integer without a cast [-Werror=int-conversion]
633 | r = dhcp6_option_parse(option_data, option_data_len, offset, &subopt, &subdata_len, &subdata);
| ^~~~~~
| |
| size_t {aka long unsigned int}
../src/libsystemd-network/dhcp6-option.c:358:25: note: expected ‘size_t *’ {aka ‘long unsigned int *’} but argument is of type ‘size_t’ {aka ‘long unsigned int’}
358 | size_t *offset,
| ~~~~~~~~^~~~~~
cc1: some warnings being treated as errors
```
Compilation would fail because we could have HAVE_SMACK_RUN_LABEL without
HAVE_SMACK. This doesn't make much sense, so let's just make -Dsmack=false
completely disable smack.
Also, the logic in smack-setup.c seems dubious: '#ifdef SMACK_RUN_LABEL'
would evaluate to true even if -Dsmack-run-label='' is used. I think
this was introduced in the conversion to meson:
8b197c3a8a added
AC_ARG_WITH(smack-run-label,
AS_HELP_STRING([--with-smack-run-label=STRING],
[run systemd --system with a specific SMACK label]),
[AC_DEFINE_UNQUOTED(SMACK_RUN_LABEL, ["$withval"], [Run with a smack label])],
[])
i.e. it really was undefined if not specified. And it was same
still in 72cdb3e783 when configure.ac
was dropped.
So let's use the single conditional HAVE_SMACK_RUN_LABEL everywhere.
Units are copied out via sendmsg datafd from images, but that means
the SELinux labels get lost in transit. Extract them and copy them over.
Given recvmsg cannot use multiple IOV transparently when the sizes are
variable, use a '\0' as a separator between the filename and the label.
upstream meson stopped allowing combining boolean with the plus
operator, and now requires using the logical and operator
reference:
43302d3296Fixes: #20632
Add support for systemd-pkcs11 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (pkcs11 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
Add support for systemd-fido2 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (fido2 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
The output is similar to our hand-crafted status message, but it's nice to use
the built-in functionality. After all, it was amended during development to
support our use case.
This undoes part of 4c890ad3cc: the
implementations of update-dbus-docs and update-man-rules are moved back to
man/meson.build, and alias_target() is used to keep the visible target names
unchanged.
The rules for man pages are reworked so that it's possible to invoke the
targets even if xstlproc is not available. After all, xsltproc is only needed
for the final formatted output, and not other processing.
Ubuntu Bionic 18.04 has 0.45, so it was below the previously required
minimum version already. Focal 20.04 has 0.53.2. Let's require that
and use various features that are available.
Otherwise the build sometimes fails in a racy way:
```
[274/1850] Compiling C object src/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p/cryptsetup-token-systemd-tpm2.c.o
FAILED: src/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p/cryptsetup-token-systemd-tpm2.c.o
cc -Isrc/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p (...) -c ../build/src/cryptsetup/cryptsetup-tokens/cryptsetup-token-systemd-tpm2.c
../build/src/cryptsetup/cryptsetup-tokens/cryptsetup-token-systemd-tpm2.c:12:10: fatal error: version.h: No such file or directory
12 | #include "version.h"
| ^~~~~~~~~~~
compilation terminated.
```
Follow-up to d1ae38d85a.
Add support for systemd-tpm2 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (tpm2 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
This closes an important gap: so far we would reexecute the system manager and
restart system services that were configured to do so, but we wouldn't do the
same for user managers or user services.
The scheme used for user managers is very similar to the system one, except
that there can be multiple user managers running, so we query the system
manager to get a list of them, and then tell each one to do the equivalent
operations: daemon-reload, disable --now, set-property Markers=+needs-restart,
reload-or-restart --marked.
The total time that can be spend on this is bounded: we execute the commands in
parallel over user managers and units, and additionally set SYSTEMD_BUS_TIMEOUT
to a lower value (15 s by default). User managers should not have too many
units running, and they should be able to do all those operations very
quickly (<< 1s). The final restart operation may take longer, but it's done
asynchronously, so we only wait for the queuing to happen.
The advantage of doing this synchronously is that we can wait for each step to
happen, and for example daemon-reloads can finish before we execute the service
restarts, etc. We can also order various steps wrt. to the phases in the rpm
transaction.
When this was initially proposed, we discussed a more relaxed scheme with bus
property notifications. Such an approach would be more complex because a bunch
of infrastructure would have to be added to system manager to propagate
appropriate notifications to the user managers, and then the user managers
would have to wait for them. Instead, now there is no new code in the managers,
all new functionality is contained in src/rpm/. The ability to call 'systemctl
--user user@' makes this approach very easy. Also, it would be very hard to
order the user manager steps and the rpm transaction steps.
Note: 'systemctl --user disable' is only called for a user managers that are
running. I don't see a nice way around this, and it shouldn't matter too much:
we'll just leave a dangling symlink in the case where the user enabled the
service manually.
A follow-up for https://bugzilla.redhat.com/show_bug.cgi?id=1792468 and
fa97d2fcf6.
Instead of embedding the commands to invoke directly in the macros,
let's use a helper script as indirection. This has a couple of advantages:
- the macro language is awkward, we need to suffix most commands by "|| :"
and "\", which is easy to get wrong. In the new scheme, the macro becomes
a single simple command.
- in the script we can use normal syntax highlighting, shellcheck, etc.
- it's also easier to test the invoked commands by invoking the helper
manually.
- most importantly, the logic is contained in the helper, i.e. we can
update systemd rpm and everything uses the new helper. Before, we would
have to rebuild all packages to update the macro definition.
This raises the question whether it makes sense to use the lua scriptlets when
the real work is done in a bash script. I think it's OK: we still have the
efficient lua scripts that do the short scripts, and we use a single shared
implementation in bash to do the more complex stuff.
The meson version is raised to 0.47 because that's needed for install_mode.
We were planning to raise the required version anyway…
This moves the /var/log/README content out of /var and into the
docs location, replacing the previous file with a symlink
created through a tmpfiles.d entry.
We disabled it in f73fb7b742 in response to an
apparent gcc bug. It seems that depending on the combination of optimization
options, gcc still ignores (void). But this seems to work fine with clang, so
let's re-enable the warning conditionally.
So, as it turns out AF_ALG is turned off in a lot of kernels/container
environments, including our CI. Hence, if we link against OpenSSL
anyway, let's just use that client side. It's also faster.
One of those days we should drop the khash code, and ust use OpenSSL,
once the licensing issues are resolved.
The general idea with users and groups created through sysusers is that an
appropriate number is picked when the allocation is made. The number that is
selected will be different on each system based on the order of creation of
users, installed packages, etc. Since system users and groups are not shared
between installations, this generally is not an issue. But it becomes a problem
for initrd: some file systems are shared between the initrd and the host (/run
and /dev are probably the only ones that matter). If the allocations are
different in the host and the initrd, and files survive switch-root, they will
have wrong ownership.
This makes the gids build-time-configurable for all groups and users where
state may survive the switch from initrd to the host.
In particular, all "hardware access" groups are like this: files in /dev will
be owned by them. Eventually the new udev would change ownership, but there
would be a momemnt where the files were owned by the wrong group. The
allocations are "soft-static" in the language of Fedora packaging guidelines:
the uid/gid will be used if possible, but we'll fall back to a different
one. TTY_GID is the exception, because the number is used directly.
Similarly, the possibility to configure "soft-static" uids is added for daemons
which may usefully run in the initramfs: systemd-network (lease information and
interface state is serialized to /run), systemd-resolve (stub files and
interface state), systemd-timesync (/run/systemd/timesync).
Journal files are owned by the group systemd-journal, and acls are granted
for wheel and adm.
systemd-oom and systemd-coredump are excluded from this patch: I assume that
oomd is not useful in the initrd, and coredump leaves no state (it only creates
a pipe in /run?).
The defaults are not changed: if nothing is configured, dynamic allocation will
be used. I looked at a Debian system, and the numbers are all different than
on Fedora.
For Fedora, see the list of uids and gids at https://pagure.io/setup/blob/master/f/uidgid.
In particular, systemd-network and systemd-resolve got soft-static numbers to
make it easy to transition from a non-host-specific initrd to a host system
already a few years back (https://bugzilla.redhat.com/show_bug.cgi?id=1102002).
I also requested static allocations for sgx, input, render in
https://pagure.io/packaging-committee/issue/1078,
https://pagure.io/setup/pull-request/27.
Debugging udev issues especially during the early boot is fairly
difficult. Currently, you need to enable (at least) debug logging and
start monitoring uevents, try to reproduce the issue and then analyze
and correlate two (usually) huge log files. This is not ideal.
This patch aims to provide much more focused debugging tool,
tracepoints. More often then not we tend to have at least the basic idea
about the issue we are trying to debug further, e.g. we know it is
storage related. Hence all of the debug data generated for network
devices is useless, adds clutter to the log files and generally
slows things down.
Using this set of tracepoints you can start asking very specific
questions related to event processing for given device or subsystem.
Tracepoints can be used with various tracing tools but I will provide
examples using bpftrace.
Another important aspect to consider is that using tracepoints you can
debug production systems. There is no need to install test packages with
added logging, no debuginfo packages, etc...
Example usage (you might be asking such questions during the debug session),
Q: How can I list all tracepoints?
A: bpftrace -l 'usdt:/usr/lib/systemd/systemd-udevd:udev:*'
Q: What are the arguments for each tracepoint?
A: Look at the code and search for use of DEVICE_TRACE_POINT macro.
Q: How many times we have executed external binary?
A: bpftrace -e 'usdt:/usr/lib/systemd/systemd-udevd:udev:spawn_exec { @cnt = count(); }'
Q: What binaries where executed while handling events for "dm-0" device?
A bpftrace -e 'usdt:/usr/lib/systemd/systemd-udevd:udev:spawn_exec / str(arg1) == "dm-0"/ { @cmds[str(arg4)] = count(); }'
Thanks to Thomas Weißschuh <thomas@t-8ch.de> for reviewing this patch
and contributions that allowed us to drop the dependency on dtrace tool
and made the resulting code much more concise.
In commit d895e10a a test was introduced to validate that prefix is a
child of rootprefix. However, it only works when rootprefix is "/".
Since the test is ignored when rootprefix is equal to prefix, this is
only noticed if specifying both -Drootprefix= and -Dprefix=, e.g.:
$ meson foo -Drootprefix=/foo -Dprefix=/foo/bar
meson.build:111:8: ERROR: Problem encountered: Prefix is not below
root prefix (now rootprefix=/foo prefix=/foo/bar)
On Debian, bpftool is installed in /usr/sbin, which is not in $PATH for
non-root users by default, so finding it fails.
Add a secondary, hard-coded '/usr/sbin/bpftool' after 'bpftool' so that
meson can find it.
https://packages.debian.org/sid/amd64/bpftool/filelist
This ensures that the fuzz test code is also built by default.
It also increases the test coverage a bit. Compiling the tests
*with* sanitizers is painfully slow, so this is not enabled. But
just compiling them sauté is hardly noticable. Running the tests
increases the test count and runtime:
622 tests, 26 s
to
922 tests, 35 s
I think this is acceptable.
This doesn't matter too much, but makes things a bit more consistent.
A minor advantage is that the file is not a configuration file for meson
anymore, so:
a) It is not built unless pulled in by another target. Since
we don't usually build man pages by default, this saves a tiny
amount of work.
b) When the .in file is updated, meson does not reconfigure everything,
but just rebuilds the dependent targets.
Now that the conversion is finished, time for benchmarking:
a full build with default settings (and -Dstandalonebinaries=true), yields
before this pull request: 1687 targets, 148.13s user 35.17s system 317% cpu 57.697 total
with the full pull request: 1714 targets, 143.07s user 27.87s system 314% cpu 54.369 total
The difference doesn't seem significant. Partial rebuilds might be faster as
mentioned before.
We had two big 'configuration_data' objects in meson config. (There are in fact
more. On is added in this series, and there's one for efi… But those others
have a handful variables only for specific purposes and don't matter). The two
sets are 'conf' and 'substs', and were inherited from the original autotools
system. In the past there was even a third set ('m4_defines'), but @yuwata
removed it in 348b44372f. And those two/three
systems had very similar data, but with different variable names, because of
historical reasons. They also used subtly different quoting (.set()
vs. .set10() vs. .set_quoted()), which was required because the templating
engines were not flexible enough. This meants we had more work when changing
things, and we needed to search for different variable names, etc.
With a more flexible templating engine we can do with just one
configuration_data object.
The naming of variables is very inconsistent. I tried to use more
modern style naming (UNDERSCORED_TITLE_CASE), but I didn't change existing
names too much. Only SYSTEM_DATA_UNIT_PATH is renamed to SYSTEM_DATA_UNIT_DIR
to match SYSTEM_CONFIG_UNIT_DIR.
I want to stop using 'substs'. But in this case, configure_file() is nicer
than custom_target(), because it causes meson to immediately generate the
helpers after configuration, so it's possible to do
'meson build && build/man/man ...', without building anything first.
We only substitute one variable here, so let's use a custom configuration_data()
object.
m4 was hugely popular in the past, because autotools, automake, flex, bison and
many other things used it. But nowadays it much less popular, and might not even
be installed in the buildroot. (m4 is small, so it doesn't make a big difference.)
(FWIW, Fedora dropped make from the buildroot now,
https://fedoraproject.org/wiki/Changes/Remove_make_from_BuildRoot. I think it's
reasonable to assume that m4 will be dropped at some point too.)
The main reason to drop m4 is that the syntax is not very nice, and we should
minimize the number of different syntaxes that we use. We still have two
(configure_file() with @FOO@ and jinja2 templates with {{foo}} and the
pythonesque conditional expressions), but at least we don't need m4 (with
m4_dnl and `quotes').
HAVE_SMACK_RUN_LABEL was dropped back in 348b44372f,
so one line in etc.conf was not rendered as expected ;(
Checking if names are defined is paying for itself!
We don't need two (and half) templating systems anymore, yay!
I'm keeping the changes minimal, to make the diff manageable. Some enhancements
due to a better templating system might be possible in the future.
For handling of '## ' — see the next commit.
m4 was nice in '85, but the syntax feels a bit dated. Since we use python for
meson, let's use a popular python templating engine to replace some m4 usage.
A little nicety is that typos are caught:
FAILED: sysusers.d/systemd-remote.conf
/usr/bin/meson --internal exe --capture sysusers.d/systemd-remote.conf -- /home/zbyszek/src/systemd/tools/meson-render-jinja2.py config.h ../sysusers.d/systemd-remote.conf.j2
Traceback (most recent call last):
File "/home/zbyszek/src/systemd/tools/meson-render-jinja2.py", line 28, in <module>
print(render(sys.argv[2], defines))
File "/home/zbyszek/src/systemd/tools/meson-render-jinja2.py", line 24, in render
return template.render(defines)
File "/usr/lib/python3.9/site-packages/jinja2/environment.py", line 1090, in render
self.environment.handle_exception()
File "/usr/lib/python3.9/site-packages/jinja2/environment.py", line 832, in handle_exception
reraise(*rewrite_traceback_stack(source=source))
File "/usr/lib/python3.9/site-packages/jinja2/_compat.py", line 28, in reraise
raise value.with_traceback(tb)
File "<template>", line 8, in top-level template code
jinja2.exceptions.UndefinedError: 'HAVE_MICROHTTP' is undefined
This checking mirrors what 349cc4a507 did for C defines.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
Today this is v248 with 938bdfc0fa, which,
if you don't know about the github webflow key fails to configure with
meson.build:724:8: ERROR: String "gpg: Signature made Tue 30 Mar 2021 22:59:02 CEST\ngpg: using RSA key 4AEE18F83AFDEB23\ngpg: Can't check signature: No public key\n1617137942\n" cannot be converted to int
or, if you do, with
meson.build:724:8: ERROR: String 'gpg: Signature made Tue 30 Mar 2021 22:59:02 CEST\ngpg: using RSA key 4AEE18F83AFDEB23\ngpg: Good signature from "GitHub (web-flow commit signing) <noreply@github.com>" [unknown]\ngpg: WARNING: This key is not certified with a trusted signature!\ngpg: There is no indication that the signature belongs to the owner.\nPrimary key fingerprint: 5DE3 E050 9C47 EA3C F04A 42D3 4AEE 18F8 3AFD EB23\n1617137942\n' cannot be converted to int
New glibc deprecated mallocinfo(), even newer glibc added mallocinfo2()
as replacement. Use it, if it exists.
Follow-up for 4b6f74f5a0 and related
commits.
https://github.com/systemd/systemd/pull/19316 failed with:
[1065/1670] Linking target systemd-hwdb
--- command ---
14:28:29 /root/src/test/hwdb-test.sh
--- stdout ---
./systemd-hwdb does not exist, please build first
I'm not sure what is going on here… In principle meson says that tests may be
called from any directory, but in practice is was always the build directory.
So far we were relying on systemd-hwdb being present in '.', and this worked.
Either way, it's nicer to pass the exact path, so let's do that.
* Add `bpf-framework` feature gate with 'auto', 'true' and 'false' choices
* Add libbpf [0] dependency
* Search for clang llvm-strip and bpftool binaries in compile time to
generate bpf skeleton.
For libbpf [0], make 0.2.0 [1] the minimum required version.
If libbpf is satisfied, set HAVE_LIBBPF config option to 1.
If `bpf-framework` feature gate is set to 'auto', means that whether
bpf feature is enabled or now is defined by the presence of all of
libbpf, clang, llvm and bpftool in build
environment.
With 'auto' all dependencies are optional.
If the gate is set to `true`, make all of the libbpf, clang and llvm
dependencies mandatory.
If it's set to `false`, set `BPF_FRAMEWORK` to false and make libbpf
dependency optional.
libbpf dependency is dynamic followed by the common pattern in systemd.
meson, bpf: add build rule for socket_bind program
Try to make this more manageable by reording:
- dependencies / inputs
(with subcategory of compression libraries)
- major components / outputs
- optional features / conditionals that don't fit into the two above categories
The division isn't well defined, because libraries often correspond one-to-one
to feature, but not always.
Let's assert if we ever happen to pass 0 to one of the log functions.
With the preceding commit to return -EIO from log_*(), passing 0 wouldn't
affect the return value any more, but it is still most likely an error.
The unit test code is an exception: we fairly often pass the return value
to print it, before checking what it is. So let's assert that we're not
passing 0 in non-test code. As with the previous check for %m, this is only
done in developer mode. We are depending on external code setting
errno correctly for us, which might not always be true, and which we can't
test, so we shouldn't assert, but just handle this gracefully.
I did a bunch of greps to try to figure out if there are any places where
we're passing 0 on purpose, and couldn't find any.
The one place that failed in tests is adjusted.
About "zerook" in the name: I wanted the suffix to be unambiguous. It's a
single "word" because each of the words in log_full_errno is also meaningful,
and having one term use two words would be confusing.
Using a enum is all nice and generic, but at this point it seems unlikely that
we'll add further build modes. But having an enum means that we need to include
the header file with the enumeration whenerever the conditional is used. I want
to use the conditional in log.h, which makes it hard to avoid circular imports.
We intentionally do not inline initializations with definitions for
a bunch of _cleanup_ variables in tests, to ensure valgrind is triggered.
This triggers a lot of maybe-uninitialized false positives when -O2 and
-flto are used. Suppress them.
The warning was disabled in 8794164fed to avoid
false positives. But it is useful in finding errors, even if it sometimes
results in untrue warnings (c.f. 77fac974fe, da46a1bc3c).
After #19168, #19169, and #19175, there are no warnings with
-Dbuildtype=debug-optimized/-O2 and gcc-11.0.1-0.3.fc34.x86_64. Warnings
are reenabled for -O[23]
-O0 is good for development, and -O2 is the default optimization level for
Fedora package builds. -Os, -O3, -O1, and -Og still generate some warnings. In
fact, with -Os the number of warnings seems completely hopeless. Dozens and
dozens.
With 8f20232fcb systemd-localed supports
generating locales when required. This fails if the locale directory is
read-only, so make it writable.
Closes#19138
sd-boot has a copy of a subset of codes from libbasic. This makes
sd-boot share the code with libbasic, and dedup the code.
Note, startswith_no_case() is dropped from sd-boot, as
- it is not used,
- the previous implementation is not correct,
- gnu-efi does not have StrniCmp() or so.
There is no technical reason to support systems with split-usr, except for
backwards compatibility. Even though systemd itself makes an effort to support
this, many other tools aren't as careful. Despite those efforts, we
(collectively) get it wrong often, because doing it "wrong" on systems with
merged-usr has no consequences. Since almost all developers are on such
systems, any issues are only discovered late. Supporting this split-usr mode
makes both code and documentation more complicated. The split is purely
artificial and has no justification except to allow old installation to not
update. Mechanisms to update existing systems are available though: Fedora
did that in https://fedoraproject.org/wiki/Features/UsrMove, Debian has
the usrmerge package.
The next version of Debian will only support systems with split-usr=false,
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=978636#178:
The Technical Committee resolves that Debian 'bookworm' should
support only the merged-usr root filesystem layout, dropping support
for the non-merged-usr layout.
Let's start warning if split-usr mode is used, in preparation to removing the
split in one of the future releases.
The target is update-syscall-tables, so let's call the script
update-syscall-tables.sh to reduce the cognitive overhead when
trying to find the right file.
The script is renamed to match.
Now all targets are named uniformly in a tab-completion-friendly fashion, with
the exception of systemd-update-po which is generated by the i18n module
automatically:
$ ninja -C build -t targets | grep update
systemd-update-po: phony
update-syscall-tables: phony
update-syscall-header: phony
update-hwdb: phony
update-hwdb-autosuspend: phony
update-dbus-docs: CUSTOM_COMMAND
update-man-rules: CUSTOM_COMMAND
Very old versions of meson did not include the subdirectory name in the
target name, so we started adding various "top-level" custom targets in
subdirectories. This was nice because the main meson.build file wasn't
as cluttered. But then meson started including the subdir name in the
target name. So let's move the definition to the root so we can have all
targets named uniformly.
Before this commit, udevd is built with LOG_REALM=LOG_REALM_UDEV.
However, log level specified by e.g. environment variable or kernel
command line option are also passed to LOG_REALM_SYSTEMD. So, the
maximum log level for the two realms are always equivalent, and it is
not necessary to specify the build option. Hence drop it.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
vcs_tag() is slow. When the version-tag meson option is set,
we can use configure_file() directly to speed up incremental
builds.
Before (with version-tag set to v247):
```
‣ Running build script...
[1/418] Generating version.h with a custom command
real 0m0.521s
user 0m0.229s
sys 0m0.067s
```
After (with version-tag set to v247):
```
‣ Running build script...
ninja: no work to do.
real 0m0.094s
user 0m0.048s
sys 0m0.022s
```
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
By default, systemd installs various sample configuration files
containing commented-out defaults. Systems seeking to minimize the
number of files in /etc may wish to install directories and
configuration files that have semantic effects, but not install not
commented-out sample configuration files.
Turn install-sysconfdir into a multi-valued option, with a "no-samples"
value to skip installing sample-only configuration files.
This change improves integration with distributions using locale-gen to
generate missing locale on-demand, like Debian-based distributions
(Debian/Ubuntu/PureOS/Tanglu/...) and Arch Linux.
We only ever enable new locales for generation, and never disable them.
Furthermore, we only generate UTF-8 locale.
This feature is only used if explicitly enabled at compile-time, and
will also be inert at runtime if the locale-gen binary is missing.
The next libblkid v2.37 is going to support session offsets for
multi-session CD/DVDs. This feature is implemented by "hint offsets".
These offsets are optional and prober specific (e.g., iso, udf, ...).
For this purpose, the library provides a new function
blkid_probe_set_hint(), and blkid(8) provides a new command-line
option --hint <name>=<offset>. For CD/DVD, the offset name is
"session_offset".
The difference between classic --offset and the new --hint is that
--offset is very restrictive and defines the probing area and the rest
of the device is invisible to the library. The new --hint works
like a suggestion, it provides a hint where the user assumes the
filesystem, but the rest of the device is still readable for the
library (for example, to get some additional superblock information
etc.).
If the --hint is without a value then it defaults to zero.
The option --hint implementation in udev-builtin-blkid.c is backwardly
compatible. If compiled against old libblkid, then the option is used in
the same way as --offset.
Addresses: https://github.com/karelzak/util-linux/issues/1161
Addresses: https://github.com/systemd/systemd/pull/17424
Normally ls-files prints the full path to files from the repo root. But when
$GIT_WORK_TREE is set, ls-files prints paths relative to the current
directory. When rebasing, $GIT_WORK_TREE is set in the commands executed from
'rebase -x'. This causes problems if meson config is touched and the meson
reconfigures itself. ($GIT_WORK_TREE shouldn't be relevant, since the paths that
ls-files reports don't depend on the work tree, but whatever.) Let's unset
GIT_WORK_TREE to avoid the issue.
$ (cd test; git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
test/dmidecode-dumps/HP-Z600.bin
test/dmidecode-dumps/Lenovo-ThinkPad-X280.bin
test/dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
$ (cd test; GIT_WORK_TREE=$PWD/.. git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
dmidecode-dumps/HP-Z600.bin
dmidecode-dumps/Lenovo-ThinkPad-X280.bin
dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
Fixes#18148.
