IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
This adds support for a new kernel root verity command line option
"verity_root_options=" which controls the behaviour of dm-verity by
forwarding options directly to systemd-veritysetup.
See `veritysetup(8)` for more details.
Much like systemd.condition-needs-update= this new switch allows
overriding of a unit file condition, but this time its
ConditionFirstBoot=.
Usecase is also primarily debugging, but could be useful for other
schemes too.
Adds the resumeflags= kernel command line option to allow setting a
custom device timeout for the resume device (defaults to the same as the
root device).
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
With this we can stabilize how naming works for network interfaces. A
user can request through a kernel cmdline option or an env var which
scheme to follow. The idea is that installers use this to set into stone
(a very soft stone though) the scheme used during installation so that
interface naming doesn't change afterwards anymore.
Why use env vars and kernel cmdline options, and not a config file of
its own?
Well, first of all there's no obvious existing one to use. But more
importantly: I have the feeling that this logic is kind of an incomplete
hack, and I simply don't want to do advertise this as a perfectly
working solution. So far we used env vars for the non-so-official
options and proper config files for the official stuff. Given how
incomplete this logic is (i.e. the big variable for naming remains the
kernel, which might expose sysfs attributes in newer versions that we
check for and didn't exist in older versions — and other problems like
this), I am simply not confident in giving this first-class exposure in
a primary configuration file.
Fixes: #10448
Until a core dump handler is installed by systemd-sysctl, the generation of
core dump for services is turned OFF which can make the debugging of the early
boot process harder especially since there's no easy way to restore the core
dump generation.
This patch introduces a new kernel command line option which specifies an
absolute path where the kernel should write the core dump file when an early
process crashes.
This will take effect until systemd-coredump (or any other handlers) takes
over.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This updates the man page for the changes introduced in 1d84ad9445.
"=" is kep if the option is predominantly used with an argument, and dropped
otherwise.
v2:
- update also description of log_color
- drop '=' in all cases where it is optional
(previous rule of dropping it only in some cases was just too arbitrary.)
This adds a generator and a small service that will look for "roothash="
on the kernel command line and use it for setting up a very partition
for the root device.
This provides similar functionality to nspawn's existing --roothash=
switch.
This adds support for a new kernel command line option "systemd.volatile=" that
provides the same functionality that systemd-nspawn's --volatile= switch
provides, but for host systems (i.e. systems booting with a kernel).
It takes the same parameter and has the same effect.
In order to implement systemd.volatile=yes a new service
systemd-volatile-root.service is introduced that only runs in the initrd and
rearranges the root directory as needed to become a tmpfs instance. Note that
systemd.volatile=state is implemented different: it simply generates a
var.mount unit file that is part of the normal boot and has no effect on the
initrd execution.
The way this is implemented ensures that other explicit configuration for /var
can always override the effect of these options. Specifically, the var.mount
unit is generated in the "late" generator directory, so that it only is in
effect if nothing else overrides it.
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
They were outdated, and this way it's less likely that they'll get out of sync
again. Anyway, it's easier for the reader to have the kernel and config file
options next to one another.
Allow for overriding all other machine-ids which may be present on
the system using a kernel command line systemd.machine_id or
--machine-id= option.
This is especially useful for network booted systems where the
machine-id needs to be static, or for containers where a specific
machine-id is wanted.
This introduces a new systemd.crash_reboot=1 kernel command line option
that triggers a reboot after crashing.
This also cleans up crash VT handling. Specifically, it cleans up the
configuration setting, to be between 1..63 or a boolean. This is to
replace the previous logic where "-1" meant disabled. We continue to
accept that setting, but only document the boolean syntax instead.
This also brings the documentation of the default settings in sync with
what actually happens.
The CrashChVT= configuration file setting is renamed to CrashChangeVT=,
following our usual logic of not abbreviating unnecessarily. The old
setting stays support for compat reasons.
Fixes#1300
