IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch allows udevsend to be called by the user and not only by the
kernel with its SEQNUM. If no SEQNUM is given, we move the event straight
to the exec queue and don't look if something is missing.
I don't know if this is really needed, but some people seem trying to
send events trough udevd instead of calling udev directly with their
scripts and confuse the reorder logic with that.
So at least, we may remove this source of confusion and udevsend is much
much faster back than udev itself and it will also block concurrent events
for the same devpath.
this patch corrects ide devices with number greater than 9 being linked
into wrong discs/discX directories (my hda10 device was in discs/disc1
directory)
it adds % into pattern for $DRIVE, so for example, hda10 is not eaten
to hda1, but to hda, and break in for cycle works for it
> I don't mind udevd using glibc, I just want the programs that get run a
> lot of different times (udev and udevsend) to be as small as possible to
> get the best cache results. As udevd sticks around all the time, it's
> not as important. Sound sane to you?
Oh, nice. Good idea.
> Here is a small cleanup and better Makefile integration.
> udevd and udevsender are now installed. Just switch HOTPLUG_EXEC from ROOT
> to SENDER before install and udevsend will be called.
>
> We may add the location of the socket and lock file to the config,
> if this is needed.
Same patch with a fix for the stack size setting.
On Thu, Jan 29, 2004 at 04:55:11PM +0100, Kay Sievers wrote:
> On Thu, Jan 29, 2004 at 02:56:25AM +0100, Kay Sievers wrote:
> > On Wed, Jan 28, 2004 at 10:47:36PM +0100, Kay Sievers wrote:
> > > Oh, couldn't resist to try threads.
> > > It's a multithreaded udevd that communicates through a localhost socket.
> > > The message includes a magic with the udev version, so we don't accept
> > > older udevsend's.
> > >
> > > No need for locking, cause we can't bind two sockets on the same address.
> > > The daemon tries to connect and if it fails it starts the daemon.
> > >
> > > We create a thread for every incoming connection, handle over the socket,
> > > sort the messages in the global message queue and exit the thread.
> > > Huh, that was easy with threads :)
> > >
> > > With the addition of a message we wakeup the queue manager thread and
> > > handle timeouts or move the message to the global exec list. This wakes
> > > up the exec list manager who looks if a process is already running for this
> > > device path.
> > > If yes, the exec is delayed otherwise we create a thread that execs udev.
> > > n the background. With the return of udev we free the message and wakeup
> > > the exec list manager to look if something is pending.
> > >
> > > It is just a quick shot, cause I couldn't solve the problems with fork an
> > > scheduling and I wanted to see if I'm to stupid :)
> > > But if anybody with a better idea or more experience with I/O scheduling
> > > we may go another way. The remaining problem is that klibc doesn't support
> > > threads.
> > >
> > > By now, we don't exec anything, it's just a sleep 3 for every exec,
> > > but you can see the queue management by watching syslog and do:
> > >
> > > DEVPATH=/abc ACTION=add SEQNUM=0 ./udevsend /abc
>
> Next version, switched to unix domain sockets.
Next cleaned up version. Hey, nobody wants to try it :)
Works for me, It's funny if I connect/disconnect my 4in1-usb-flash-reader
every two seconds. The 2.6 usb rocks! I can connect/diconnect a hub with 3
devices plugged in every second and don't run into any problem but a _very_
big udevd queue.
On Tue, Jan 27, 2004 at 11:02:25AM -0800, Greg KH wrote:
> On Mon, Jan 26, 2004 at 07:28:03PM -0500, Adrian Drzewiecki wrote:
> > Looking over the code, I noticed something odd in
> > namedev.c:strcmp_pattern() --
> >
> > while (*p && (*p != ']'))
> > p ++;
> > return strcmp_pattern(p+1, s+1);
> >
> > If the pattern string is invalid, and is not terminated by a ']', then 'p'
> > will point at \0 and p+1 will be beyond the string.
>
> Yes, I think you are correct.
>
> Hm, Kay, any idea of the proper way to fix this? I've attached a patch
> below, but I don't think it is correct.
>
> while (*p && (*p != ']'))
> p++;
> - return strcmp_pattern(p+1, s+1);
> + if (*p)
> + return strcmp_pattern(p+1, s+1);
> + else
> + return 1;
> }
> }
Sure, it's perfectly correct. I'm wondering how Adrian found this.
We can use the return 1 at the end of the whole function, and asking
for the closing ']' is more descriptive, but it does the same.
- return strcmp_pattern(p+1, s+1);
+ if (*p == ']')
+ return strcmp_pattern(p+1, s+1);
Patch is attached, that also replaces all the *s with s[0].
Here is the next round. We have three queues now. All incoming messages
are queued in msg_list and if nothing is missing we move it to the
running_list and exec in the background.
If the exec comes back, it removes the message from the running_list and
frees the message.
Before we exec, we check the running_list if there is a udev running on
the same device path. If yes, we move the message to the delay_list. If
the former exec comes back, we move the message to the running_list and
exec it.
The very first event is delayed now to catch possible earlier sequences,
every following event is executed without delay if no sequence is missing.
The daemon doesn't exit by itself any longer, cause we don't want to
delay every first exec.
I've put a $(PWD) for now in the Makefile for testing this beast. Only
the local binaries are executed, not the /sbin/udev. We can change it
if we are ready for real testing.
And SIGKILL can't be cought, so I removed it from the handler :)
06:58:36 sig_handler: caught signal 15
06:58:36 main: using ipc queue 0x2d548
06:58:37 message is still in the ipc queue, starting daemon...
06:58:37 work: received sequence 3, expected sequence 0
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 set_timeout: set timeout in 1 seconds
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 1, expected sequence 1
06:58:37 msg_dump_queue: sequence 1 in queue
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 msg_dump: sequence 1, 'add', '/block/sda', 'block'
06:58:37 msg_exec: child [8038] created
06:58:37 running_moveto_queue: move sequence 1 [8038] to running queue '/block/sda'
06:58:37 set_timeout: set timeout in 5 seconds
06:58:37 work: received sequence 2, expected sequence 2
06:58:37 msg_dump_queue: sequence 2 in queue
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 msg_dump: sequence 2, 'add', '/block/sdb', 'block'
06:58:37 msg_exec: child [8039] created
06:58:37 running_moveto_queue: move sequence 2 [8039] to running queue '/block/sdb'
06:58:37 msg_dump: sequence 3, 'add', '/block/sdc', 'block'
06:58:37 msg_exec: child [8040] created
06:58:37 running_moveto_queue: move sequence 3 [8040] to running queue '/block/sdc'
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 4, expected sequence 4
06:58:37 msg_dump_queue: sequence 4 in queue
06:58:37 msg_dump: sequence 4, 'remove', '/block/sdc', 'block'
06:58:37 msg_exec: delay exec of sequence 4, [8040] already working on '/block/sdc'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:37 msg_exec: child [8043] created
06:58:37 running_moveto_queue: move sequence 4 [8043] to running queue '/block/sdc'
06:58:37 work: received sequence 5, expected sequence 5
06:58:37 msg_dump_queue: sequence 5 in queue
06:58:37 msg_dump: sequence 5, 'remove', '/block/sdb', 'block'
06:58:37 msg_exec: delay exec of sequence 5, [8039] already working on '/block/sdb'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:37 msg_exec: child [8044] created
06:58:37 running_moveto_queue: move sequence 5 [8044] to running queue '/block/sdb'
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 8, expected sequence 6
06:58:37 msg_dump_queue: sequence 8 in queue
06:58:37 set_timeout: set timeout in 5 seconds
06:58:37 work: received sequence 6, expected sequence 6
06:58:37 msg_dump_queue: sequence 6 in queue
06:58:37 msg_dump_queue: sequence 8 in queue
06:58:37 msg_dump: sequence 6, 'remove', '/block/sda', 'block'
06:58:37 msg_exec: delay exec of sequence 6, [8038] already working on '/block/sda'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sda'
06:58:37 msg_exec: child [8047] created
06:58:37 running_moveto_queue: move sequence 6 [8047] to running queue '/block/sda'
06:58:37 set_timeout: set timeout in 5 seconds
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8038
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8039
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8040
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8043
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8044
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8047
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:39 main: using ipc queue 0x2d548
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 9, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 work: received sequence 11, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 10, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 13, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 14, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 msg_dump_queue: sequence 14 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 15, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 msg_dump_queue: sequence 14 in queue
06:58:39 msg_dump_queue: sequence 15 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:41 main: using ipc queue 0x2d548
06:58:41 work: received sequence 12, expected sequence 7
06:58:41 msg_dump_queue: sequence 8 in queue
06:58:41 msg_dump_queue: sequence 9 in queue
06:58:41 msg_dump_queue: sequence 10 in queue
06:58:41 msg_dump_queue: sequence 11 in queue
06:58:41 msg_dump_queue: sequence 12 in queue
06:58:41 msg_dump_queue: sequence 13 in queue
06:58:41 msg_dump_queue: sequence 14 in queue
06:58:41 msg_dump_queue: sequence 15 in queue
06:58:41 set_timeout: set timeout in 1 seconds
06:58:42 sig_handler: caught signal 14
06:58:42 sig_handler: event timeout reached
06:58:42 event 8, age 5 seconds, skip event 7-7
06:58:42 msg_dump: sequence 8, 'add', '/block/sdb', 'block'
06:58:42 msg_exec: child [8057] created
06:58:42 running_moveto_queue: move sequence 8 [8057] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 9, 'add', '/block/sdc', 'block'
06:58:42 msg_exec: child [8058] created
06:58:42 running_moveto_queue: move sequence 9 [8058] to running queue '/block/sdc'
06:58:42 msg_dump: sequence 10, 'remove', '/block/sdc', 'block'
06:58:42 msg_exec: delay exec of sequence 10, [8058] already working on '/block/sdc'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:42 msg_exec: child [8059] created
06:58:42 running_moveto_queue: move sequence 10 [8059] to running queue '/block/sdc'
06:58:42 msg_dump: sequence 11, 'remove', '/block/sdb', 'block'
06:58:42 msg_exec: delay exec of sequence 11, [8057] already working on '/block/sdb'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:42 msg_exec: child [8060] created
06:58:42 running_moveto_queue: move sequence 11 [8060] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 12, 'remove', '/block/sda', 'block'
06:58:42 msg_exec: child [8061] created
06:58:42 running_moveto_queue: move sequence 12 [8061] to running queue '/block/sda'
06:58:42 msg_dump: sequence 13, 'add', '/block/sda', 'block'
06:58:42 msg_exec: delay exec of sequence 13, [8061] already working on '/block/sda'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sda'
06:58:42 msg_exec: child [8062] created
06:58:42 running_moveto_queue: move sequence 13 [8062] to running queue '/block/sda'
06:58:42 msg_dump: sequence 14, 'add', '/block/sdb', 'block'
06:58:42 msg_exec: delay exec of sequence 14, [8057] already working on '/block/sdb'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:42 msg_exec: child [8063] created
06:58:42 running_moveto_queue: move sequence 14 [8063] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 15, 'add', '/block/sdc', 'block'
06:58:42 msg_exec: delay exec of sequence 15, [8058] already working on '/block/sdc'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:42 msg_exec: child [8064] created
06:58:42 running_moveto_queue: move sequence 15 [8064] to running queue '/block/sdc'
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8057
06:58:43 sig_handler: exec finished, pid 8058
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8059
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8060
06:58:43 sig_handler: exec finished, pid 8061
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8062
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8063
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8064
I want to make udevinfo the standard query interface, so all the user
features of the main udev are copied in here. It is now capable to:
o query the database for a given value
o dump the whole database
o extract all possible device attributes for a sysfs_device
In addition to the known options of udev it supports the query for the
mode of the device node, and it includes the mode in the database dump:
udevinfo -d
P: /class/video4linux/video0
N: video/webcam0
M: 0666
S: camera0 kamera0
O: 500
G: 500
It is also a bit more friendly with the pathnames specified for devices or nodes.
We remove the absolute path or add it if neccessary:
udevinfo -q mode -n video/webcam0
udevinfo -q mode -n /udev/video/webcam0
0666
udevinfo -q mode -p /sys/class/video4linux/video0
udevinfo -q mode -p /class/video4linux/video0
udevinfo -q mode -p class/video4linux/video0
0666
Here is the next revision for udevd:
o Small cleanups all over the place.
o Swich to the usual linked list format "list.h".
o Better timeout handling.
We store a timestamp in in every queued event, so we don't wait longer
than the timeout specified, if the hole in the list is not shrinking.
o ignore udevd target if klibc is used
