IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds a tiny binary that is hooked into SSH client config via
ProxyCommand and which simply connects to an AF_UNIX or AF_VSOCK socket
of choice.
The syntax is as simple as this:
ssh unix/some/path # (this connects to AF_UNIX socket /some/path)
or:
ssh vsock/4711
I used "/" as separator of the protocol ID and the value since ":" is
already taken by SSH itself when doing sftp. And "@" is already taken
for separating the user name.
sshd now supports config file drop-ins, hence let's install one to hook
up "userdb ssh-authorized-keys", so that things just work.
We put the drop-in relatively early, so that other drop-ins generally
will override this.
Ideally sshd would support such drop-ins in /usr/ rather than /etc/, but
let's take what we can get. It's not that sshd's upstream was
particularly open to weird ideas from Linux people.
This should also implicitly enabled vmspawn in CI. It wasn't passing even the
basic tests, which we didn't see, because it needs to be explicitly enabled.
Also this renames 80-ethernet.network.example -> 89-ethernet.network.example,
to make it have lower precedence over other default .network files for
Ethernet interfaces.
Closes#29765.
This implements a "storage target mode", similar to what MacOS provides
since a long time as "Target Disk Mode":
https://en.wikipedia.org/wiki/Target_Disk_Mode
This implementation is relatively simple:
1. a new generic target "storage-target-mode.target" is added, which
when booted into defines the target mode.
2. a small tool and service "systemd-storagetm.service" is added which
exposes a specific device or all devices as NVMe-TCP devices over the
network. NVMe-TCP appears to be hot shit right now how to expose
block devices over the network. And it's really simple to set up via
configs, hence our code is relatively short and neat.
The idea is that systemd-storagetm.target can be extended sooner or
later, for example to expose block devices also as USB mass storage
devices and similar, in case the system has "dual mode" USB controller
that can also work as device, not just as host. (And people could also
plug in sharing as NBD, iSCSI, whatever they want.)
How to use this? Boot into your system with a kernel cmdline of
"rd.systemd.unit=storage-target-mode.target ip=link-local", and you'll see on
screen the precise "nvme connect" command line to make the relevant
block devices available locally on some other machine. This all requires
that the target mode stuff is included in the initrd of course. And the
system will the stay in the initrd forever.
Why bother? Primarily three use-cases:
1. Debug a broken system: with very few dependencies during boot get
access to the raw block device of a broken machine.
2. Migrate from system to another system, by dd'ing the old to the new
directly.
3. Installing an OS remotely on some device (for example via Thunderbolt
networking)
(And there might be more, for example the ability to boot from a
laptop's disk on another system)
Limitations:
1. There's no authentication/encryption. Hence: use this on local links
only.
2. NVMe target mode on Linux supports r/w operation only. Ideally, we'd
have a read-only mode, for security reasons, and default to it.
Future love:
1. We should have another mode, where we simply expose the homed LUKS
home dirs like that.
2. Some lightweight hookup with plymouth, to display a (shortened)
version of the info we write to the console.
To test all this, just run:
mkosi --kernel-command-line-extra="rd.systemd.unit=storage-target-mode.target" qemu
This allows distros to install configuration file templates in /usr/lib/systemd
for example.
Currently we install "empty" config files in /etc/systemd/. They serve two
purposes:
- The file contains commented-out values that show the default settings.
- It is easier to edit the right file if it is already there, the user doesn't
have to type in the path correctly, and the basic file structure is already in
place so it's easier to edit.
Things that have happened since this approach was put in place:
- We started supporting drop-ins for config files, and drop-ins are the
recommended way to create local configuration overrides.
- We have systemd-analyze cat-config which takes care of iterating over
all possible locations (/etc, /run, /usr, /usr/local) and figuring out
the right file.
- Because of the first two points, systemd-analyze cat-config is much better,
because it takes care of finding all the drop-ins and figuring out the
precedence. Looking at files manually is still possible of course, but not
very convenient.
The disadvantages of the current approach with "empty" files in /etc:
- We clutter up /etc so it's harder to see what the local configuration actually is.
- If a user edits the file, package updates will not override the file (e.g.
systemd.rpm uses %config(noreplace). This means that the "documented defaults"
will become stale over time, if the user ever edits the main config file.
Thus, I think that it's reasonable to:
- Install the main config file to /usr/lib so that it serves as reference for
syntax and option names and default values and is properly updated on package
upgrades.
- Recommend to users to always use drop-ins for configuration and
systemd-analyze cat-config to view the documentation.
This setting makes this change opt-in.
Fixes#18420.
[zjs: add more text to the description]
Now that we use meson feature options for our dependencies, we can just
rely on '--auto-features=disabled' to do the same. One benefit of this
is that specific features can still be force-enabled by overriding it
with the appropriate '-Dfeature=enabled' flag.
The two remaining uses for skip-deps can simply rely on their default
logic that sets the value to 'no' when the dependency is disabled.
Also, there is no need to conditionalize the get_variable() calls
because not-found dependencies will just return the passed default value
if provided.
This uses a two-step approach to make sure we can fall back to
find_library(), while also skipping the detection if the features are
explicitly disabled.
By making this a disabler dependency, we can slightly simplify the code
and it als fixes the build for -Dfdisk=disabled as we failed to create a
fallback empty libshared_fdisk variable.
By using meson features we can replace the handcrafted dependency
auto-detection by just passing the value from get_option directly to the
required arg for dependency, find_library etc.
'auto' features make the dependency optional, 'enabled' requires it
while 'disabled' features will skip detection entirely.
Any skipped or not found dependency will just be a no-op when passed to
build steps and therefore we can also skip the creation of empty vars.
The use of skip_deps for these is dropped here as meson provides a way
to disable all optional features in one go by passing
'-Dauto_features=disabled'.
Build option "link-portabled-shared" to build a statically linked
systemd-portabled by using
-Dlink-portabled-shared=false
on systems with full systemd stack except systemd-portabled, such
as CentOS/RHEL 9.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
Most of the support for valgrind was under HAVE_VALGRIND_VALGRIND_H, i.e. we
would enable if the valgrind headers were found. The operations then we be
conditionalized on RUNNING_UNDER_VALGRIND.
But in a few places we had code which was conditionalized on VALGRIND, i.e. the
config option. I noticed because I compiled with -Dvalgrind=true on a machine
that didn't have valgrind.h, and the build failed because
RUNNING_UNDER_VALGRIND was not defined. My first idea was to add a check that
the header is present if the option is set, but it seems better to just remove
the option. The code to support valgrind is trivial, and if we're
!RUNNING_UNDER_VALGRIND, it has negligible cost. And the case of running under
valgrind is always some special testing/debugging mode, so we should just do
those extra steps to make valgrind output cleaner. Removing the option makes
things simpler and we don't have to think if something should be covered by the
one or the other configuration bit.
I had a vague recollection that in some places we used -Dvalgrind=true not
for valgrind support, but to enable additional cleanup under other sanitizers.
But that code would fail to build without the valgrind headers anyway, so
I'm not sure if that was still used. If there are uses like that, we can
extend the condition for cleanup_pools().
Allow defining the default keymap to be used by
vconsole-setup through a build option. A template
vconsole.conf also gets populated by tmpfiles if
it doesn't exist.
Config options are -Ddefault-timeout-sec= and -Ddefault-user-timeout-sec=.
Existing -Dupdate-helper-user-timeout= is renamed to -Dupdate-helper-user-timeout-sec=
for consistency. All three options take an integer value in seconds. The
renaming and type-change of the option is a small compat break, but it's just
at compile time and result in a clear error message. I also doubt that anyone was
actually using the option.
This commit separates the user manager timeouts, but keeps them unchanged at 90 s.
The timeout for the user manager is set to 4/3*user-timeout, which means that it
is still 120 s.
Fedora wants to experiment with lower timeouts, but doing this via a patch would
be annoying and more work than necessary. Let's make this easy to configure.
The option is added because we have a similar one for kernel-install. This
program requires python, and some people might want to skip it because of this.
The tool is installed in /usr/lib/systemd for now, since the interface might
change.
A template file is used, but there is no .in suffix.
The problem is that we'll later want to import the file as a module
for tests, but recent Python versions make it annoyingly hard to import
a module from a file without a .py suffix. imp.load_sources() works, but it
is deprecated and throws warnings.
importlib.machinery.SourceFileLoader().load_module() works, but is also
deprecated. And the documented replacements are a maze of twisted little
callbacks that result in an empty module.
So let's take the easy way out, and skip the suffix which makes it easy
to import the template as a module after adding the directory to sys.path.
In the Xen case, it's the hypervisor which manages kexec. We thus
have to ask it whether a kernel is loaded, instead of relying on
/sys/kernel/kexec_loaded.
There might be (embedded) systems that get never updated (things like
e.g. entertainment systems of trains, for example) and where the adjustment of
the system clock (introduced by b10abe4bba) would
do the wrong thing even if the difference between the systemd build time and
the rtc is 15 years or more.
This patch allows disabling the adjustment by setting
'clock-valid-range-usec-max' meson option to 0 or to a negative value.
Integers and booleans are supposed to be actual integers and booleans,
not strings describing their value, but Meson silently accepted either
one. It's still wrong to do it though, and other implementations of
Meson such as muon choke on it.
0 UID and GID are special, and should not be acceptable for the settings.
Hence, we can handle 0 as unset.
Strictly speaking, time epoch with 0 is valid, but I guess no one use
0 as a valid value.
The journalctl tool may be needed on cross compilation hosts in order
to run --update-catalog against a target rootfs.
To avoid reliability issues caused by shared linking allow journalctl
to be linked statically.
DefaultSmackProcessLabel tells systemd what label to assign to its child
process in case SmackProcessLabel is not set in the service file. By
default, when DefaultSmackProcessLabel is not set child processes inherit
label from systemd.
If DefaultSmackProcessLabel is set to "/" (which is an invalid character
for a SMACK label) the DEFAULT_SMACK_PROCESS_LABEL set during compilation
is ignored and systemd act as if the option was unset.
I think developers are particularly unlikely to find the descriptions
useful, and would benefit from being able to copy&paste unit names.
Let's make this choice automatically.
https://github.com/systemd/systemd/pull/23192 caused breakage in
Arch Linux's build tooling. Let's give users an opt-out aside from
reverting the patch. It's hardly any maintenance work on our side
and gives users an easy way to revert the locale change if needed.
Of course, by default we still pick C.UTF-8 if the option is not
specified.
We're already using C.UTF-8 as the default locale for nspawn. Let's
make the same change for the default-locale option instead of deciding
what to use based on the locale used by the host system. Users can
still override the locale using the default-locale option if needed.
With an intentional mistake:
../src/login/logind-dbus.c: In function ‘bus_manager_log_shutdown’:
../src/login/logind-dbus.c:1542:39: error: format ‘%s’ expects a matching ‘char *’ argument [-Werror=format=]
1542 | LOG_MESSAGE("%s %s", message),
| ^~~~~~~
A compile time option is added to select behaviour: by default
UNIT_FILE_PRESET_ENABLE_ONLY is still used, but the intent is to change to
UNIT_FILE_PRESET_FULL at some point in the future. Distros that want to
opt-in can use the config option to change the behaviour.
(The option is just a boolean: it would be possible to make it multi-valued,
and allow full, enable-only, disable-only, none. But so far nobody has asked
for this, and it's better not to complicate things needlessly.)
With the configuration option flipped, instead of only doing enablements,
perform a full preset on first boot. The reason is that although
`/etc/machine-id` might be missing, there may be other files provisioned in
`/etc` (in fact, this use case is mentioned in `log_execution_mode`). Some of
those possible files include enablement symlinks even if presets dictate it
should be disabled.
Such a seemingly contradictory situation occurs in {RHEL,Fedora} CoreOS,
where we ship `/etc` as if `preset-all` were called. However, we want to
allow users to disable default-enabled services via Ignition, which does
this by creating preset dropins before switchroot. (For why we do
`preset-all` at compose time, see:
https://github.com/coreos/fedora-coreos-config/pull/77).
For example, the composed FCOS image has a `enable zincati.service`
preset and an enablement for that in `/etc`, while at boot time when we
switch root, there may be a `disable zincati.service` preset with higher
precedence. In that case, we want systemd to disable the service.
This is essentially a revert of 304b3079a2. It seems like systemd
*used* to do this, but it was changed to try to make the container
workflow a bit faster.
Resolves: https://github.com/coreos/fedora-coreos-tracker/issues/392
Co-authored-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Compression and decompression are controlled by the same build flag,
so if one wants to use, say, LZ4 to compress, ZSTD has to be disabled,
which means one loses the ability to read zstd-compressed journals.
Add a default-compression meson option, that allows to select any of
the available compression algorithms as the default.
Defaults to /bin/bash, no changes in the default configuration
The fallback shell for non-root users is as-specified,
and the interactive shell for nspawn sessions is started as
exec(default-user-shell, "-" + basename(default-user-shell), ...)
before falling through to bash and sh
Apparently Grub is measuring all kinds of garbage into PCR 8. Since people
apparently chainload sd-boot from grub, let's thus stay away from PCR 8,
and use PCR 12 instead for the kernel command line.
As discussed here: #22635Fixes: #22635
mostly to make sure that systemd is buildable without some dependencies
but other than that it should make it easier to build it with MSan without
having to compile all the dependencies with MSan.
