IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently the completion adds template units for commands such as
is-active, is-failed, is-enabled, status, show and others.
At the same time systemctl barfs at us, since an instanced template unit
is needed. Follow the example list from bash-completion as to which
commands should not list template units.
Note: The above is observed regardless of DefaultInstance.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Template units lacking DefaultInstance cannot be enabled/disabled or
started/restarted.
By adding DefaultInstance the unit can be enabled/disabled but it
still cannot be started/restarted.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Earlier patch added the current word to the performance critical paths.
Here we add it to every place, for consistency sake.
Suggested-by: Yu Watanabe (yuwata)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This effectively ports over b1bdb6496c
from the bash completion to zsh.
Modulo the new function, since it's unrelated perf. improvement.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Using a leading * and $SUFFIX produces misleading results. Let's imagine
that one mistypes nect instead of netc, they will get a rather
misleading completion like: sys-fs-fuse-connections.mount
Not to mention that the execution time is up by ~1/3.
time systemctl list-unit-files netctl* -> ~12ms
time systemctl list-unit-files *netctl* -> ~17ms
Furthermore more units are matched, leading to greater execution time
of `systemctl show' in _filter_units_by_property
Use only $PREFIX*, removing the leading * and trailing $SUFFIX*.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
When dealing with a large number of template instances, for example
when launching daemons per VRF, it is hard for operators to correlate
log lines to arguments.
Add a new with-unit mode which, if available, prefixes unit and user
unit names when displaying its log messages instead of the syslog
identifier. It will also use the full timestamp with timezones, like
the short-full mode.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
That way, they're always sorted by date. I do not know how to make ZSH sort
them by PID through some option, but that doesn't seem very useful in the first
place.
An output from coredumpctl list is like
> TIME PID UID GID SIG COREFILE EXE
> Sun 2016-05-29 18:44:03 CEST 14578 1000 1000 6 none /tmp/pacaurtmp-wieland/python33/src/Python-3.3.6/python
^1 ^2 ^3 ^4 ^5
, but the previous sub() command turns that into
> TIMEPID UID GID SIG COREFILE EXE
> Sun2016-05-29 18:44:03 CEST 14578 1000 1000 6 none /tmp/pacaurtmp-wieland/python33/src/Python-3.3.6/python
^1 ^2 ^3 ^4 ^5
so the whole pipeline generated entries like
$UID:$DESCRIPTION
but that's not useful and probably not what was supposed to happen.
This now generates entries like
$PID:$DESCRIPTION
which make everything work.
Note that with this commmit, the completions will be sorted by PID by
ZSH.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
This change noticeably increases completion performance at the expense
of preventing possible _correct, _approximate or any matcher-list rules.
Still, responsiveness increase so huge seems to make it worth the price.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
Since busname units are only useful with kdbus, they weren't actively
used. This was dead code, only compile-tested. If busname units are
ever added back, it'll be cleaner to start from scratch (possibly reverting
parts of this patch).
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
Add the 'convertible' type to the set of allowed chassis. This applies
to all devices that can be transformed by the user from laptop style to
tablet style.
This does not add any auto-detection, yet. It only makes 'set-chassis'
accept 'convertible' as valid input.
'systemctl --failed' is an extremely common operation and it's nice to have
a shortcut for it.
Revert "man: don't document systemctl --failed" and add the option back to
systemctl's help and shell completion scripts.
This reverts commit 036359ba8d.
allow _journalctl to work when the rcquotes option is set, broken in ba89f80620.
allow the completion of --file multiple times, which ba89f80620 claims is true.
Fixes#4842
I found several issues with zsh completion code:
1. typo in cache filename: "SYS_ALL_PROPRTIES", so cache just not loading from this file
2. cache stored in one file, despite user or system mode. So it can be loaded later in wrong mode
3. most serious problem: broken logic - it retrieves cache when _cache_invalid is true
How to reproduce: type "systemctl --user status <TAB>" and you will see user units. Then press
control+C and type "systemctl --system status <TAB>" in same session and you'll see user units again
Escape unit names for the eval call in _call_program
The value of the Id property is transformed back into a unit name
usable by systemctl.
system-systemd\x5cx2dcryptsetup.slice -> system-systemd\x2dcryptsetup.slice
Also filter units by property via parameter expansion, not a for loop
