IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For most fields, the text shown by `.id` is the value that should be set
in the unit file; however, for RestrictNamespaces, it is not. Changing
this to show the actual text makes it more clear to a user what the
actual change that needs to be made to the unit file is.
Fixes#17433. Currently, if any of the validations we do before we
check start rate limiting fail, we can still enter a busy loop as
no rate limiting gets applied. A common occurence of this scenario
is path units triggering a service that fails a condition check.
To fix the issue, we simply move up start rate limiting checks to
be the first thing we do when starting a unit. To achieve this,
we add a new method to the unit vtable and implement it for the
relevant unit types so that we can do the start rate limit checks
earlier on.
otherwise we might mark tests where something crashes during shutdown as
successful, as happened in one of the recent TEST-01-BASIC runs:
```
testsuite-01.service: About to execute rm -f /failed /testok
testsuite-01.service: Forked rm as 606
testsuite-01.service: Executing: rm -f /failed /testoktestsuite-01.service: Changed dead -> start-pre
Starting TEST-01-BASIC...
...
Child 606 (rm) died (code=exited, status=0/SUCCESS)
testsuite-01.service: Child 606 belongs to testsuite-01.service.
testsuite-01.service: Control process exited, code=exited, status=0/SUCCESS (success)
testsuite-01.service: Got final SIGCHLD for state start-pre.
testsuite-01.service: Passing 0 fds to service
testsuite-01.service: About to execute sh -e -x -c "systemctl --state=failed --no-legend --no-pager >/failed ; systemctl daemon-reload ; echo OK >/testok"
testsuite-01.service: Forked sh as 607
testsuite-01.service: Changed start-pre -> start
testsuite-01.service: Executing: sh -e -x -c "systemctl --state=failed --no-legend --no-pager >/failed ; systemctl daemon-reload ; echo OK >/testok"systemd-journald.service: Got notification message from PID 560 (FDSTORE=1)S
...
testsuite-01.service: Child 607 belongs to testsuite-01.service.
testsuite-01.service: Main process exited, code=exited, status=0/SUCCESS (success)
testsuite-01.service: Deactivated successfully.
testsuite-01.service: Service will not restart (restart setting)
testsuite-01.service: Changed start -> dead
testsuite-01.service: Job 207 testsuite-01.service/start finished, result=done
[ OK ] Finished TEST-01-BASIC.
...
end.service: About to execute /bin/sh -x -c "systemctl poweroff --no-block"
end.service: Forked /bin/sh as 623end.service: Executing: /bin/sh -x -c "systemctl poweroff --no-block"
...
end.service: Job 213 end.service/start finished, result=canceled
Caught <SEGV>, dumped core as pid 624.
Freezing execution.
CentOS Linux 8
Kernel 4.18.0-305.12.1.el8_4.x86_64 on an x86_64 (ttyS0)
H login: qemu-kvm: terminating on signal 15 from pid 80134 (timeout)
E: Test timed out after 600s
Spawning getter /root/systemd/build/journalctl -o export -D /var/tmp/systemd-test.0UYjAS/root/var/log/journal/ca6031c2491543fe8286c748258df8d1...
Finishing after writing 15125 entries
Spawning getter /root/systemd/build/journalctl -o export -D /var/tmp/systemd-test.0UYjAS/root/var/log/journal/remote...
Finishing after writing 0 entries
-rw-r-----. 1 root root 25165824 Aug 20 12:26 /var/tmp/systemd-test.0UYjAS/system.journal
TEST-01-BASIC RUN: Basic systemd setup [OK]
...
This reverts commit 491b736a49.
If the _static_ linked version of busybox is installed, openSUSE doesn't need
any specific code.
A following commit will make sure that the static linked version of busybox is
installed in the busybox container.
NO_BUILD=1 indicates that we want to test systemd from the local system and not
the one from the local build. Hence there should be no need to call
find-build-dir.sh when NO_BUID=1 especially since it's likely that the script
will fail to find a local build in this case.
This avoids find-build-dir.sh to emit 'Specify build directory with $BUILD_DIR'
message when NO_BUILD=1 and no local build can be found.
This introduces a behavior change though: systemd from the local system will
always be preferred when NO_BUILD=1 even if a local build can be found.
Previously, when Priority= is unspecified, networkd configured the rule with
the highest (=0) priority. This commit makes networkd distinguish the case
the setting is unspecified and one explicitly specified as Priority=0.
Note.
1) If the priority is unspecified on configure, then kernel dynamically picks
a priority for the rule.
2) The new behavior is consistent with 'ip rule' command.
Replaces #15606.
In some cases image names are unpredictable - some orchestrators/deployment
tools like to mangle names to suit their internal formats. In these cases,
the requirement that the extension-release file matches exactly the image
name where it's contained cannot work.
Allow falling back to loading the first regular file which name starts with
'extension-release' located in /usr/lib/extension-release.d/ and tagged with
a user.extension-release.strict extended attribute with a true value, if the
one with the expected name cannot be found.
Depending on the timing, socat will either get ECONNREFUSED oder EPIPE
from systemd. The latter will cause it to exit(1) and subsequently the
test to fail.
We are not actually interested in the return code of socat though. The
test is supposed to check, whether rate limiting of a socket unit works
properly.
So ignore any failures from the socat invocation and instead check, if
test10.socket is in state "failed" with result "trigger-limit-hit" after
it has been triggered.
TriggerLimitIntervalSec= by default is set to 2s. A "sleep 10" should
give systemd enough time even on slower machines, to reach the trigger
limit.
For better readability, break the test into separate ExecStart lines.
Fixes#19154.
Skip a harmless error when running the tests on a system with a significantly
older systemd version (ldd tries to resolve the unprefixed RPATH for libsystemd.so.0,
which is in this case older than the already installed libsystemd.so.0 in $initdir).
The issue is triggered by installing test dependencies in install_missing_libraries().
Spotted on CentOS 8.
```
$ ldd /var/tmp/systemd-test.nZO11F/root/lib/systemd/tests/test-sd-device-thread
/var/tmp/systemd-test.nZO11F/root/lib/systemd/tests/test-sd-device-thread: /lib64/libsystemd.so.0: version `LIBSYSTEMD_240' not found (required by /var/tmp/systemd-test.nZO11F/root/lib/systemd/tests/test-sd-device-thread)
linux-vdso64.so.1 (0x00007fffb79d0000)
libclang_rt.asan-powerpc64le.so => /usr/lib64/clang/11.0.0/lib/linux/libclang_rt.asan-powerpc64le.so (0x00007fffb6ef0000)
libsystemd.so.0 => /lib64/libsystemd.so.0 (0x00007fffb6d20000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fffb6cd0000)
libc.so.6 => /lib64/libc.so.6 (0x00007fffb6ab0000)
$ LD_LIBRARY_PATH=/var/tmp/systemd-test.nZO11F/root/lib64/ ldd /var/tmp/systemd-test.nZO11F/root/lib/systemd/tests/test-sd-device-thread
linux-vdso64.so.1 (0x00007fffaba80000)
libclang_rt.asan-powerpc64le.so => /usr/lib64/clang/11.0.0/lib/linux/libclang_rt.asan-powerpc64le.so (0x00007fffaafa0000)
libsystemd.so.0 => /var/tmp/systemd-test.nZO11F/root/lib64/libsystemd.so.0 (0x00007fffaa5f0000)
libpthread.so.0 => /var/tmp/systemd-test.nZO11F/root/lib64/libpthread.so.0 (0x00007fffaa5a0000)
libc.so.6 => /var/tmp/systemd-test.nZO11F/root/lib64/libc.so.6 (0x00007fffaa380000)
```
When `linux-headers` is installed on Arch Linux, it stores the module
source tree in the kernel module directory, which is then picked up by
`find` and we get a lot of harmless but annoying errors:
```
...
modprobe: FATAL: Module Kconfig.iosched not found in directory /lib/modules/5.13.7-arch1-1
modprobe: FATAL: Module Kconfig not found in directory /lib/modules/5.13.7-arch1-1
modprobe: FATAL: Module Kconfig not found in directory /lib/modules/5.13.7-arch1-1
modprobe: FATAL: Module dm-mpath.h not found in directory /lib/modules/5.13.7-arch1-1
modprobe: FATAL: Module dm-bio-prison-v2.h not found in directory /lib/modules/5.13.7-arch1-1
modprobe: FATAL: Module raid0.h not found in directory /lib/modules/5.13.7-arch1-1
...
```
Let's fix this by trying to install only kernel modules (*.ko files with
an optional compression).
