IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When udevadm verify is invoked by an analyzer tool like rpminspect
to verify individual udev rules files, the summary just clutters the
output, so provide an option to turn the summary off.
The usage of PREFIX in this completion is mostly counter to the intended
usage of compsys in zsh. It is generally expected that completion code
provide the available completions and tags in that word position so that
compsys, with user configuration, can filter them to the appropriate set.
One egregious error caused by the usage of PREFIX here is the caching of
SYS_ALL_UNITS, which stored only the unit names prematurely filtered by
the completion prefix, affecting all future completions. For example,
$ systemctl cat nonsense<TAB>
might find no matching units if nonsense* has no matches, but now
$ systemctl cat <TAB>
will fail in all future completions even though every unit file
is a valid match, because the cached set has been erroneously filtered
by the last prefix.
When udevadm verify is invoked without positional arguments and loads
all rules files from the system like the udev daemon does, this option
can be used to operate on files underneath the specified root path.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
We seem to have no tool to verify udev rule files. There is a simple
udev rules syntax checker in the tree, test/rule-syntax-check.py, but
it is too simple to detect less trivial issues not detected by udev,
e.g. redundant comparisons (#26593) or labels without references.
Such a tool would be beneficial not only for maintaining udev rules
distributed along with udev, but also and even more so for maintaining
third party udev rules that are more likely to have issues with syntax
and semantic correctness.
Implement a udev rules syntax and semantics checker in the form of
'udevadm verify [OPTIONS] FILE...' command that is based on
udev_rules_parse_file() interface and would apply further checks
on top of it in subsequent commits.
Resolves: #26606
The unlink command removes an entry from the ESP including
referenced files that are not referenced in other entries. That is
useful eg to have multiple entries that use the same kernel with
different options.
The cleanup command removes all files that are not referenced by any
entry.
This fixes a few unrelated issues:
- when ENABLE_MACHINED is false, machinectl is not installed, but _sd_machines
is still used in a few places that want to complete -M and such.
Also, bash completion calls machinectl in various places.
Make missing machinectl mean "no machines" in this case, so
that no error is generated in the callers.
- machinectl list --full would print multiple lines of output per machine,
breaking grep, issue introduced in e2268fa437.
Using --max-addresses=1 would fix the issue, but let's use
--max-addresses=0 because we now can.
- the lists used in various places were slightly different for no good reason.
- don't use a subshell if not necessary.
The code for bash still uses the same combined list of images and running
machines for various commands. The zsh code uses images for start/clone, and
running machines for the rest. Maybe something to fix in the future.
Replaces #25048.
(s) is just ugly with a vibe of DOS. In most cases just using the normal plural
form is more natural and gramatically correct.
There are some log_debug() statements left, and texts in foreign licenses or
headers. Those are not touched on purpose.
getopt allows non-ambiguous abbreviations, so backwards-compat is maintained, and
people can use --kill-who (or even shorter abbreviations). English is flexible,
so in common speach people would use both forms, even if "whom" is technically
more correct. The advantage of using the longer form in the code is that we
effectively allow both forms, so we stop punishing people who DTGCT¹, but still
allow people to use the spoken form if they prefer.
1. Do the gramatically correct thing
When using --root=/--image= the binaries to install/update will be
picked from the directory/image. Add an option to let the caller
choose.
By default (auto) the image is tried first, and if nothing is found
then the host. The other options allow to strictly try the image
or host and ignore the other.
GIT_VERSION is not available as a config.h variable, because it's rendered
into version.h during builds. Let's rework jinja2 rendering to also
parse version.h. No functional change, the new variable is so far unused.
I guess this will make partial rebuilds a bit slower, but it's useful
to be able to use the full version string.
systemd-udev-trigger.service by default triggeres all devices regardless
of whether they were already recognized by systemd-udevd.
There are machines (especially in embedded environments) where
systemd-udev-trigger.service is configured to run at a later stage of
the boot sequence, which can lead to quite a lot of devices being
triggered although they were already recognized by systemd-udevd.
Re-triggering a lot of devices is a relatively expensive operation and
therefore should be avoided if unnecessary.
Therefore this patch introduces --initialized-nomatch, which filters out
devices that are already present in the udev database. For consistance
reasons --initialized-match is implemented as well, which filters out devices
that are *not* already present in the udev database.
Replaces #19949.
This patch changes busctl capture to generate pcapng format
instead of the legacy pcap format files. It includes basic
meta-data in the file and still uses microsecond time
resolution. In future, more things can be added such as
high resolution timestams, statistics, etc.
PCAP Next Generation capture file format is what tshark uses
and is in process of being standardized in IETF. It is also
readable with libpcap.
$ capinfos /tmp/new.pcapng
File name: /tmp/new.pcapng
File type: Wireshark/... - pcapng
File encapsulation: D-Bus
File timestamp precision: microseconds (6)
Packet size limit: file hdr: (not set)
Packet size limit: inferred: 4096 bytes
Number of packets: 22
File size: 21kB
Data size: 20kB
Capture duration: 0.005694 seconds
First packet time: 2021-12-11 11:57:42.788374
Last packet time: 2021-12-11 11:57:42.794068
Data byte rate: 3,671kBps
Data bit rate: 29Mbps
Average packet size: 950.27 bytes
Average packet rate: 3,863 packets/s
SHA256: b85ed8b094af60c64aa6d9db4a91404e841736d36b9e662d707db9e4096148f1
RIPEMD160: 81f9bac7ec0ec5cd1d55ede136a5c90413894e3a
SHA1: 8400822ef724b934d6000f5b7604b9e6e91be011
Strict time order: True
Capture oper-sys: Linux 5.14.0-0.bpo.2-amd64
Capture application: systemd 250 (250-rc2-33-gdc79ae2+)
Number of interfaces in file: 1
Interface #0 info:
Encapsulation = D-Bus (146 - dbus)
Capture length = 4096
Time precision = microseconds (6)
Time ticks per second = 1000000
Number of stat entries = 0
Number of packets = 22
systemd-analyze critical-chain accepts an optional unit argument,
however currently there's no shell-completion for it
This change provides unit name completion for both bash and zsh.
Closes: #20927
Allows to pass a portable profile when doing offline analysis of
units. Especially useful for analyzing portable images, since a
lot of the security-relevant settings in those cases come from
the profiles, but they are not shipped in the portable images.
When using "capture : true" in custom_target()s the mode of the source
file is not preserved when the generated file is not installed and so
needs to be tweaked manually. Switch from output capture to creating the
target file and copy the permissions from the input file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This introduces `ExitType=main|cgroup` for services.
Similar to how `Type` specifies the launch of a service, `ExitType` is
concerned with how systemd determines that a service exited.
- If set to `main` (the current behavior), the service manager will consider
the unit stopped when the main process exits.
- The `cgroup` exit type is meant for applications whose forking model is not
known ahead of time and which might not have a specific main process.
The service will stay running as long as at least one process in the cgroup
is running. This is intended for transient or automatically generated
services, such as graphical applications inside of a desktop environment.
Motivation for this is #16805. The original PR (#18782) was reverted (#20073)
after realizing that the exit status of "the last process in the cgroup" can't
reliably be known (#19385)
This version instead uses the main process exit status if there is one and just
listens to the cgroup empty event otherwise.
The advantages of a service with `ExitType=cgroup` over scopes are:
- Integrated logging / stdout redirection
- Avoids the race / synchronisation issue between launch and scope creation
- More extensive use of drop-ins and thus distro-level configuration:
by moving from scopes to services we can have drop ins that will affect
properties that can only be set during service creation,
like `OOMPolicy` and security-related properties
- It makes systemd-xdg-autostart-generator usable by fixing [1], as obviously
only services can be used in the generator, not scopes.
[1] https://bugs.kde.org/show_bug.cgi?id=433299
This option has coredumpctl look at all journals instead of only the
local ones. This allows coredumpctl to show information about remote
coredumps if the coredumps are made available in /var/lib/systemd/coredump
and the corresponding journals are made available in /var/log/journal.
This is already possible using the --directory option but --all makes it
more user friendly since users don't have to enter the journal directory
anymore as long as it's available under /var/log/journal.
