IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Specifying the test number manually is tedious and prone to errors (as
recently proven). Since we have all the necessary data to work out the
test number, let's do it automagically.
As in 2a5fcfae02
and in 3e67e5c992
using /usr/bin/env allows bash to be looked up in PATH
rather than being hard-coded.
As with the previous changes the same arguments apply
- distributions have scripts to rewrite shebangs on installation and
they know what locations to rely on.
- For tests/compilation we should rather rely on the user to have setup
there PATH correctly.
In particular this makes testing from git easier on NixOS where do not provide
/bin/bash to improve compose-ability.
Just as `RuntimeMaxSec=` is supported for service units, add support for
it to scope units. This will gracefully kill a scope after the timeout
expires from the moment the scope enters the running state.
This could be used for time-limited login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
Many tests were also masking systemd-machined.service. But machined
should only start when activated, so having it not masked shouldn't be
noticable. TEST-25-IMPORT needs it.
I *think* this was originally added to make it easier to see what was happening
in tests. Later we added the functionality to print the journal on failure, so
this redirection has stopped being useful.
In https://github.com/systemd/systemd/pull/13719#issuecomment-539292650
@filbranden shows that grep tries to write to stdout and fails. In general,
we should not assume that writing to the console it always possible. We have
special code to handle this in pid1 after all:
99 19:22:10.731965 fstat(1, <unfinished ...>
99 19:22:10.731993 <... fstat resumed>{st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0), ...}) = 0
99 19:22:10.732070 write(1, "ExecStartPost={ path=/bin/echo ; argv[]=/bin/echo ${4_four_ex} ; ignore_errors=no ; start_time=[Mon 2019-10-07 19:22:10 PDT] ; stop_time=[Mon 209-10-07 19:22:10 PDT] ; pid=97 ; code=exited ; status=0 }\n", 203) = -1 EIO (Input/output error)
99 19:22:10.732174 write(2, "grep: ", 6) = -1 EIO (Input/output error)
99 19:22:10.732226 write(2, "write error", 11) = -1 EIO (Input/output error)
99 19:22:10.732263 write(2, ": Input/output error", 20) = -1 EIO (Input/output error)
99 19:22:10.732298 write(2, "\n", 1 <unfinished ...>
99 19:22:10.732325 <... write resumed>) = -1 EIO (Input/output error)
99 19:22:10.732349 exit_group(2) = ?
99 19:22:10.732424 +++ exited with 2 +++
Removing the redirection should make the tests less flakey.
Replaces #13719.
While at it, also drop NotifyAccess=all. I think it was added purposefully in
TEST-20-MAINPIDGAMES, and then cargo culted to newer tests.
Almost all tests were manually mounting/unmounting $TESTDIR/root
from the loopback image; this moves all that into test-functions
so the test setup functions are simplier.
Also add test_setup_cleanup() function, to cleanup what is mounted
by create_empty_image_rootdir()
The `set -e` option is incompatible with a subshell/compound command,
which is followed by || <EXPR>. In such case, the -e option is ignored
in all affected subshells/functions (see man bash(1) for command `set`).
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed.
4 sp was the most common, in particular the majority of scripts under test/
used that. Let's standarize on 4 sp, because many commandlines are long and
there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp
also seems to be the default indentation, so this will make it less likely
that people will mess up if they don't load the editor config. (I think people
often use vi, and vi has no support to load project-wide configuration
automatically. We distribute a .vimrc file, but it is not loaded by default,
and even the instructions in it seem to discourage its use for security
reasons.)
Also remove the few vim config lines that were left. We should either have them
on all files, or none.
Also remove some strange stuff like '#!/bin/env bash', yikes.
The test is heavily dependent on timeouts, and if we are run in
potentially very slow QEMU instances there's a good chance we'll miss
some which we normally wouldn't miss. Hence, let's test this one in
nspawn only. Given that the test is purely in service management it
shouldn't matter whether it runs in nspawn or qemu, hence keep running
it in nspawn, but don't bother with qemu.
Similar, do this for TEST-03-JOBS, too, which operates with relatively
short sleep times internally.
Fixes: #9123
This catches errors like "ninja not found", missing programs etc. early,
instead of silently ignoring them and trying to boot a broken VM.
In install_config_files(), allow some distro specific files to be absent
(such as /etc/sysconfig/init).
All test/TEST* but TEST-02-CRYPTSETUP share the same check_result_qemu()
and test_cleanup(), so move them into test_functions and only override
them in TEST-02-CRYPTSETUP.
Also provide a common test_run() which by default assumes that both QEMU
and nspawn tests are run. Particular tests which don't support either
need to explicitly opt out by setting $TEST_NO_{QEMU,NSPAWN}. Do it this
way around to avoid accidentally forgetting to opt in, and to encourage
test authors to at least always support nspawn.
If the "systemctl start" happens at an "unlucky" time such as 1000.9 seconds
and then e. g. runs for 2.6 s (sleep 2 plus the overhead of starting the unit
and waiting for it) the END_SEC would be 1003.5s which would round to 1004,
making the difference 4. On busier testbeds the overhead apparently can take a
bit more than 0.5s. The main point is really that it doesn't wait that much
longer, so "-le 4" seems perfectly fine. We allow up to 1.5s in the subsequent
"wait5fail" test below too.
Fixes#4582
It tries to find a suitable QEMU binary and will use KVM if present.
We can now configure QEMU from outside with 4 variables :
- $QEMU_BIN : path to QEMU's binary
- $KERNEL_APPEND : arguments appended to kernel cmdline
- $KERNEL_BIN : path to a kernel
Default /boot/vmlinuz-$KERNEL_VER
- $INITRD : path to an initramfs
Default /boot/initramfs-${KERNEL_VER}.img
- $QEMU_SMP : number of CPU simulated by QEMU.
Default 1
(from Alexander Graf's script: http://www.spinics.net/lists/kvm/msg72389.html)
- fix typo
- use compiled systemd-nspawn
- drop --capability=... from systemd-nspawn invocation, is is the default now
- simplify sudo make invocations
Add a test case for job merging with --ignore-dependencies.
test.sh is copied from TEST-01-*, only lightly modified (this
should be refactored better in the future).
test-jobs.sh is the core of this test.
