IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Systemd services are permitted to be scripts, as well as binary
executables.
The same also applies to the underlying /sbin/mount and /sbin/swapon.
It is not necessary for the user to consider what type of program file
these are. Nor is it necessary with systemd-nspawn, to distinguish between
init as a "binary" v.s. a user-specified "program".
Also fix a couple of grammar nits in the modified sentences.
This option is likely to be very useful for systemd-run invocations,
hence let's add a shortcut for it.
With this new concepts it's now very easy to put together systemd-run
invocations that leave zero artifacts in the system, including when they
fail.
In this mode, we'll directly connect stdin/stdout/stderr of the invoked
service with whatever systemd-run itself is invoked on. This allows
inclusion of "systemd-run" commands in shell pipelines, as unlike
"--pty" this means EOF of stdin/stdout/stderr are propagated
independently.
If --pty and --pipe are combined systemd-run will automatically pick the
right choice for the context it is invoked in, i.e. --pty when invoked
on a TTY, and --pipe otherwise.
This adds a brief explanation, suggesting the use of "systemd-run -M" to
acquire exit status/code information for the invoked process.
My original plan was to propagate the exit code/status in "machinectl
shell" too, but this would mean we'd have to actively watch the shell's
runtime status, and thus would need full, highly privileged and
continious access to the container's system manager, the way
"systemd-run" does it. This would be quite a departure from the
simplistic, low-priviliged OpenShell() bus call implementation of the
current code, that really just acquires a PTY device with a shell
connected.
Moreover it would blur the lines between the two commands even further,
which I think is not desirable. Hence, from now on:
"machinectl shell" is the full-session, interactive shell for human
users
"systemd-run -M …" is the low-level tool, that supports
on-interactive mode, and is more configurable and suitable for
streaming.
Fixes: #4215
This adds "systemd-mount" which is for transient mount and automount units what
"systemd-run" is for transient service, scope and timer units.
The tool allows establishing mounts and automounts during runtime. It is very
similar to the usual /bin/mount commands, but can pull in additional
dependenices on access (for example, it pulls in fsck automatically), an take
benefit of the automount logic.
This tool is particularly useful for mount removable file systems (such as USB
sticks), as the automount logic (together with automatic unmount-on-idle), as
well as automatic fsck on first access ensure that the removable file system
has a high chance to remain in a fully clean state even when it is unplugged
abruptly, and returns to a clean state on the next re-plug.
This is a follow-up for #2471, as it adds a simple client-side for the
transient automount logic added in that PR.
In later work it might make sense to invoke this tool automatically from udev
rules in order to implement a simpler and safer version of removable media
management á la udisks.
The description in the man page was wrong, KillUserProcesses does
not kill all processes of the user. Describe what the setting
does, and also add links between the relavant sections of the
manual.
Also, add an extensive example which shows how to launch screen
in the background.
In 110ceee58e we removed the period after
printing the started units. This makes copying the unit name easier but
results in improper English.
This adds a colon before printing the units, which makes the output
look better.
When bash is interactive it ignores SIGTERM.
SIGHUP indicates to bash that the connection has been
severed. `systemctl stop` doesn't wait TimeoutStopSec secs.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
In the long run we really should figure out if we want to stick with 8ch
or 2ch indenting, and not continue with half-and-half. For now, just
make emacs aware of the files that use 2ch indenting.
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
The code for parsing these properties is shared with "systemctl
set-property", which means all the resource control settings are
immediately available.
