IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
An administrator might want to block a certain sysusers config file from
being executed, e.g. to block the creation of a certain user.
Only a relatively short description is added in the man page, since
overrides should be relatively rare.
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
This patch adds supports networkd to configure bond mode
during creation via persistent conf. Mode can be configured
with conf param 'Mode'. A new section Bond is added to the
conf to support bond mode.
These modes can be configured now.
balance-rr
active-backup
balance-xor
broadcast
802.3ad
balance-tlb
balance-alb
Example conf file: test-bond.conf
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=balance-xor
Test case:
1. start networkd service:
12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff
2. find bond mode:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (xor)
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
Changes:
1. Added file networkd-bond.c
2. Bond mode enum BondMode
3. conf section [Bond]
[tomegun: whitespace]
As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer
way to hook in systemd-firstboot.service on first boots (those with /etc
unpopulated), so let's do this, and get rid of the generator again.
This patch introduces TUN/TAP device creation support
to networkd.
Example conf to create a tap device:
file: tap.netdev
------------------
[NetDev]
Name=tap-test
Kind=tap
[Tap]
OneQueue=true
MultiQueue=true
PacketInfo=true
User=sus
Group=sus
------------------
Test:
1. output of ip link
tap-test: tap pi one_queue UNKNOWN_FLAGS:900 user 1000 group 1000
id:
uid=1000(sus) gid=10(wheel) groups=10(wheel),1000(sus)
context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
Modifications:
Added:
1. file networkd-tuntap.c
3. netdev kind NETDEV_KIND_TUN and NETDEV_KIND_TAP
2. Tun and Tap Sections and config params to parse
conf and gperf conf parameters
[tomegun: tweak the 'kind' checking for received ifindex]
This new tool is based on "sd-path", a new (so far unexported) API for
libsystemd, that can hopefully grow into a workable API covering /opt
and more one day.
Send hostname (option 12) in DISCOVER and REQUEST messages so the
DHCP server could use it to register with dynamic DNS and such.
To opt-out of this behaviour set SendHostname to false in [DHCP]
section of .network file
[tomegun: rebased, made sure a failing set_hostname is a noop and moved
config from DHCPv4 to DHCP]
The example does not compile, it fails with:
error: passing argument 3 of ‘sd_journal_get_data’ from incompatible
pointer type
Cast to (const void **) to avoid this.
Reformat fstab options description. Now they are easier to read and
show up in systemd.directives(7).
Use a single sublist for both /etc/fstab and /etc/crypttab options.
Many of them can be used in both places. crypttab(5) is updated to use
the same docbook elements, so formatting is uniform.
This adds support for DHCP options 33 and 121: Static Route and
Classless Static Route. To enable this feature, set UseRoutes=true
in .network file. Returned routes are added to the routing table.
If there are v4 or v6 specific options we can keep those in separate sections,
but for the common options, we will use only one.
Moreovere only use DHCP=[yes/both|no/none|v4|v6] to enable or disable the clients.
Let's move things closer to journald's configuration settings, which
knows Compress= already, as a boolean. This makes things more uniform,
but also gives us more freedom to possibly swap out the used compression
algorithm one day.
This sounds overly low-level and implementation-detaily. Let's just
use the default level XZ suggests. This gives us more room to possibly
swap out the compression algorithm used, as the compression level range
will not leak into user configuration.
When disk space taken up by coredumps grows beyond a configured limit
start removing the oldest coredump of the user with the most coredumps,
until we get below the limit again.
Previously it would recursively copy the entire tree in, and descend
into subdirectories even if the destination already exists. Let's do
what the documentation says and not do that.
If files down the tree shall be copied too, they should get their own
"C" lines.
Now that we actually can distuingish system and normal users there's no
point in taking session information into account anymore when splitting
up logs.
This has the beenfit with that coredump information will actually end up
in each user's own journal.
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
network-pre.target is a passive target that should be pulled in by
services that want to be executed before any network is configured (for
example: firewall scrips).
network-pre.target should be ordered before all network managemet
services (but not be pulled in by them).
network-pre.target should be order after all services that want to be
executed before any network is configured (and be pulled in by them).
If two lines refer to paths that are suffix and prefix of each other,
then always process the prefix first, the suffix second. In all other
cases strictly process rules in the order they appear in the files.
This makes creating /var/run as symlink to /run a lot more fun, since it
is automatically created first.
"m" so far has been a non-globbing version of "z". Since this makes it
quite redundant, let's get rid of it. Remove "m" from the man pages,
beef up "z" docs instead, and make "m" nothing more than a compatibility
alias for "z".
Instead of blindly creating another bind mount for read-only mounts,
check if there's already one we can use, and if so, use it. Also,
recursively mark all submounts read-only too. Also, ignore autofs mounts
when remounting read-only unless they are already triggered.
Restart=on-abnormal is similar to Restart=on-failure, but avoids
restarts on unclean exit codes (but still doing restarts on all
obviously unclean exits, such as timeouts, signals, coredumps, watchdog
timeouts).
Also see:
https://fedorahosted.org/fpc/ticket/191
This would otherwise unconditionally trigger any /boot autofs mount,
which we probably should avoid.
ProtectSystem= will now only cover /usr and (optionally) /etc, both of
which cannot be autofs anyway.
ProtectHome will continue to cover /run/user and /home. The former
cannot be autofs either. /home could be, however is frequently enough
used (unlikey /boot) so that it isn't too problematic to simply trigger
it unconditionally via ProtectHome=.
Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit.
With this in place we now have two neat options ProtectSystem= and
ProtectHome= for protecting the OS itself (and optionally its
configuration), and for protecting the user's data.
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
It is almost always incorrect to allow DHCP or other sources of
transient host names to override an explicitly configured static host
name.
This commit changes things so that if a static host name is set, this
will override the transient host name (eg: provided via DHCP). Transient
host names can still be used to provide host names for machines that have
not been explicitly configured with a static host name.
The exception to this rule is if the static host name is set to
"localhost". In those cases we act as if no
static host name has been explicitly set.
As discussed elsewhere, systemd may want to have an fd based ownership
of the transient name. That part is not included in this commit.
Only accept cpu quota values in percentages, get rid of period
definition.
It's not clear whether the CFS period controllable per-cgroup even has a
future in the kernel, hence let's simplify all this, hardcode the period
to 100ms and only accept percentage based quota values.
Similar to CPUShares= and BlockIOWeight= respectively. However only
assign the specified weight during startup. Each control group
attribute is re-assigned as weight by CPUShares=weight and
BlockIOWeight=weight after startup. If not CPUShares= or
BlockIOWeight= be specified, then the attribute is re-assigned to each
default attribute value. (default cpu.shares=1024, blkio.weight=1000)
If only CPUShares=weight or BlockIOWeight=weight be specified, then
that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
Some unattended systems do not have a console attached and entering
the default rescue mode will not be too helpful. Allow to specify
the "-y" option to attempt to fix all filesystem errors.
Manually verified by downloading an image.gz of e2fsprogs, using
losetup and running systemd-fsck on the loop device and varying
the fsck.repair=preen|yes|no option.
Shift the asterisks in the documentation's prototypes such that they
are consistent among each other. Use the right side to match what is
used in source code.
Addendum to commit v209~82.
"When refering to code, STDOUT/STDOUT/STDERR are replaced with
stdin/stdout/stderr, and in other places they are replaced with
normal phrases like standard output, etc."
Addendum to commit v209~127.
To make sure we don't delay boot on systems where (some) network links are managed by someone else
we don't block if something else has successfully brought up a link.
We will still block until all links we are aware of that are managed by networkd have been
configured, but if no such links exist, and someone else have configured a link sufficiently
that it has a carrier, it may be that the link is ready so we should no longer block.
Note that in all likelyhood the link is not ready (no addresses/routes configured),
so whatever network managment daemon configured it should provide a similar wait-online
service to block network-online.target until it is ready.
The aim is to block as long as we know networking is not fully configured, but no longer. This
will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't
know whether networkd is the main/only network manager.
Even in the case networking is fully configured by networkd, the default behavior may not be
sufficient: if two links need to be configured, but the first is fully configured before the
second one appears we will assume the network is up. To work around that, we allow specifying
specific devices to wait for before considering the network up.
This unit is enabled by default, just like systemd-networkd, but will only be pulled in if
anyone pulls in network-online.target.
