IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Allow configuration of an errno error to return from blacklisted
syscalls, instead of immediately terminating a process.
- Fix parsing logic when libseccomp support is turned off
- Only keep the actual syscall set in the ExecContext, and generate the
string version only on demand.
gold doesn't exhibit the problems with linking of compatibility
libraries.
It is also slightly faster:
make clean && make -j5 bfd gold
real 34.885s 33.707s
user 34.486s 32.189s
sys 9.929s 10.845s
real 35.128s 33.508s
user 34.660s 31.858s
sys 10.798s 10.341s
real 35.405s 33.748s
user 34.765s 32.384s
sys 11.635s 10.998s
real 35.250s 33.795s
user 34.704s 32.253s
sys 11.220s 11.469s
touch src/libsystemd/sd-bus.c && make -j5
bfd gold
real 10.224s 9.030s
user 11.664s 9.877s
sys 3.431s 2.878s
real 10.021s 9.165s
user 11.526s 9.990s
sys 3.061s 3.015s
real 10.233s 8.961s
user 11.657s 9.973s
sys 3.467s 2.202s
real 10.160s 9.086s
user 11.637s 9.950s
sys 3.188s 2.859s
It is nicer to predefine patterns using configure time check instead of
using casts everywhere.
Since we do not need to use any flags, include "%" in the format instead
of excluding it like PRI* macros.
Even if the lower-leveld dbus1 protocol calls it "serial", let's expose
the word "cookie" for this instead, as this is what kdbus uses and since
it doesn't imply monotonicity the same way "serial" does.
systemd-bus-driverd is a small daemon that connects to kdbus and
implements the org.freedesktop.DBus interface. IOW, it provides the bus
functions traditionally taken care for by dbus-daemon.
Calls are proxied to kdbus, either via libsystemd-bus (were applicable)
or with the open-coded use of ioctl().
Note that the implementation is not yet finished as the functions to
add and remove matches and to start services by name are still missing.
Since we want to retain the ability to break kernel ←→ userspace ABI
after the next release, let's not make use by default of kdbus, so that
people with future kernels will not suddenly break with current systemd
versions.
kdbus support is left in all builds but must now be explicitly requested
at runtime (for example via setting $DBUS_SESSION_BUS). Via a configure
switch the old behaviour can be restored. In fact, we change autogen.sh
to do this, so that git builds (which run autogen.sh) get kdbus by
default, but tarball builds (which ue the configure defaults) do not get
it, and hence this stays out of the distros by default.
This reverts commit f1a1264d13.
We can turn this off with a pragma only on old gcc. Newer gcc doesn't
need this, so let's not turn this off for everybody.
This allows make rules for generated build files (i.e. configure,
Makefile.in, ... ) to be skipped. This is useful when
the source is stored without timestamps (for example in CVS or GIT).
When the build rules trigger to regenerate the build files, it tries to
use the same autotools version (currently 1.14) as was originally used
for the release. Since many of our build machines run Debian Squeeze,
they only have autotools 1.11 available and the build fails.
Currently, we have to work around this by touching all the generated
files before building to avoid triggering the make rule. With this
patch, we would be able to just run configure with
--disable-maintainer-mode instead. The patch sets the default to enable
to not change the default behavior.
Ref: http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/
?id=f5cc26c77d2f332a9b40f51f0ec72e95711edf1e
For GNOME (Continuous), we are unlikely to require or want
systemd-networkd in the near term future; all of the tools and code
are targeting NetworkManager.
The long term story is still an open question of course, but for now,
there's no reason for gnome-continuous to build or ship this.
Older gcc versions throw things like:
In file included from /usr/include/fcntl.h:302:0,
from ../src/core/execute.c:25:
In function 'open',
inlined from 'open_null_as' at ../src/core/execute.c:196:12:
/usr/include/bits/fcntl2.h:50:24: error: call to '__open_missing_mode'
declared with attribute error: open with O_CREAT in second argument needs 3 arguments
__open_missing_mode ();
Allows the systemd --system process to change its current
SMACK label to a predefined custom label (usually "system")
at boot time.
This is needed to have a few system-generated folders and
sockets automatically be created with the right SMACK
label. Without that, processes either cannot communicate with
systemd or systemd fails to perform some actions.
Enabling address sanitizer seems like a useful thing, but is quite
tricky. Proper flags have to be passed to CPPFLAGS, CFLAGS and
LDFLAGS, but passing them on the commandline doesn't work because
we tests are done with ld directly, and not with libtool like in
real linking. We might want to fix this, but let's add a handy
way to enable address checking anyway.
The modules should build just fine, but AM_PATH_PYTHON sets
pkgpyexecdir for us. Without that variable we don't know where to
install modules. In addition libtool tries an empty rpath, breaking
the build. Those issues could be fixed or worked around, but we
probably don't have many people who want to avoid using python binary,
but want to compile python modules. If such uses ever come up, this
issue should be revisited.
systemd-logind will start user@.service. user@.service unit uses
PAM with service name 'systemd-user' to perform account and session
managment tasks. Previously, the name was 'systemd-shared', it is
now changed to 'systemd-user'.
Most PAM installations use one common setup for different callers.
Based on a quick poll, distributions fall into two camps: those that
have system-auth (Redhat, Fedora, CentOS, Arch, Gentoo, Mageia,
Mandriva), and those that have common-auth (Debian, Ubuntu, OpenSUSE).
Distributions that have system-auth have just one configuration file
that contains auth, password, account, and session blocks, and
distributions that have common-auth also have common-session,
common-password, and common-account. It is thus impossible to use one
configuration file which would work for everybody. systemd-user now
refers to system-auth, because it seems that the approach with one
file is more popular and also easier, so let's follow that.
As many laptops don't save/restore screen brightness across reboots,
let's do this in systemd with a minimal tool, that restores the
brightness as early as possible, and saves it as late as possible. This
will cover consoles and graphical logins, but graphical desktops should
do their own per-user stuff probably.
This only touches firmware brightness controls for now.
Moved zsh shell completion to shell-completion/zsh/_systemd for
automake's sake. Also allow users to specify where the files should go
with::
./configure --with-zshcompletiondir=/path/to/some/where
and by default going to `$datadir/zsh/site-functions`
Python 2.7, and 3.2 and higher support querying compilation
flags through pkg-config. This makes python support follow
rules similar to various other optional compilation-time
libraries. New flags are called PYTHON_DEVEL_CFLAGS and
PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is
already used for the python binary name, and things would
be confusing if the same prefix was used for two things.
configure has --disable-python-devel to disable python modules.
One advantage is that CFLAGS for modules gets smaller:
- -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv
+ -I/usr/include/python3.3m
as does LIBS:
- -lpthread -ldl -lutil -lm -lpython3.3m
+ -lpython3.3m
Support for Python 2.6 is removed, but can be easily
restored by using
PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)",
etc., as ./configure parameters.
https://bugs.freedesktop.org/show_bug.cgi?id=57800
Tcrypt uses a different approach to passphrases/key files. The
passphrase and all key files are incorporated into the "password"
to open the volume. So, the idea of slots that provide a way to
open the volume with different passphrases/key files that are
independent from each other like with LUKS does not apply.
Therefore, we use the key file from /etc/crypttab as the source
for the passphrase. The actual key files that are combined with
the passphrase into a password are provided as a new option in
/etc/crypttab and can be given multiple times if more than one
key file is used by a volume.
Enable coverage with --enable-coverage.
"make coverage" will create the report locally,
"make coverage-sync" will upload the report to
http://www.freedesktop.org/software/systemd/coverage/.
Requires lcov version 1.10 to handle naming in systemd and to
use the --no-external option.
[zj: make the coverage at least generate something with
separate build dir, simplify rules a bit: all errors
are mine. ]
This reverts commit cd3069559a.
Emacs compilation can be fixed by putting
(custom-set-variables
'(compilation-environment (quote ("GCC_COLORS="))))
in ~/.emacs.
Guys, we know that emacs is the best editor on earth, but unfortunately
its "M-x compile" terminal cannot do colors (well, it does its own
highlighting of the output anyway), and it will inform the programs it
calls about this with TERM=dumb, and gcc should check for that. But you
guys turned that off. Not cool. Let's turn it on again.
PKG_CHECK_EXISTS won't created a cached variable that later messes with
our PKG_CHECK_MODULES check for an explicit version. Unfortunately,
nesting these checks as the code existed lead to an odd error. Rather,
split the checks apart.
This also improves to the error message when the requisite version
isn't found, and supplies the literal version systemd needs.
Almost everyone wants kmod support, so don't fail silently if the libs are
out-of-date.
kmod can still be explicitly disabled and if it is not found at all, we still
default to disabling it.
As of kmod v14, it is possible to export the static node information from
/lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format.
Use this functionality to let systemd-tmpfilesd create the static device nodes
at boot, and drop the functionality from systemd-udevd.
As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev:
* the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw)
* ordering before local-fs-pre.target (see 89d09e1b5c)
Embedded folks don't need the machine registration stuff, hence it's
nice to make this optional. Also, I'd expect that machinectl will grow
additional commands quickly, for example to join existing containers and
suchlike, hence it's better keeping that separate from loginctl.
This brings the check for ENABLE_GTK_DOC in line with
HAVE_INTROSPECTION and other similar checks. Only
the status line that is printed with uninstalled
gtk-doc is changed.
https://bugs.freedesktop.org/show_bug.cgi?id=63108
Distributions may have selinux but not sushell or might
need to set a custom debug shell.
Defaults to /sbin/sushell if selinux is enabled, /bin/sh if not.
[zj: Renamed --with-debugshelltty to --with-debug-tty, and
added a line in output showing DEBUGSHELL and DEBUGTTY.
I figure that debug shell is pretty useful, and I hope
the extra line in configure status will draw attention
to it.]
This patch adds --disable-tests to configure. It is based on a patch
posted by Thierry Reding in 2010. The motivation for adding it is that
some tests fail link-time when cross-compiling.
The patch adds a new Makefile variable -- manual_tests -- and uses
that instead of noinst_PROGRAMS. However, if ENABLE_TESTS is true,
the former is added to the latter. It also renames noinst_tests to
simply tests.
* using AC_PATH_TOOL does not allow to override it from shell environment
which is useful when cross-compiling
* with external toolchain I have different HOST_PREFIX and HOST_SYS
AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy
which is available only as ${TARGET_PREFIX}-objcopy then it tries
objcopy without prefix which is found on host, but that objcopy
does not work for !host (e.g. arm when building on x86) libs
Distributions that never shipped upstart do not have
"telinit" in /lib/upstart/..
Defaults to /lib/upstart/telinit so there is no change
for systems existing installs.
use readlink -m instead of -f since we might be building in a minimal
chroot where those directories do not actually exist and readlink -f
would return an empty string.
* python-systemd-reader:
python-systemd: rename Journal to Reader
build-sys: upload python documentation to freedesktop.org
systemd-python: add Journal class for reading journal
python: build html docs using sphinx
journalct: also print Python code in --new-id
python: utilize uuid.UUID in logging
python: add systemd.id128 module
... and 34 other commits
In short: python module systemd.id128 is added, and existing
systemd.journal gains a new class systemd.journal.Reader, which can be
used to iterate over journal entries. Documentation is provided, and
accessible under e.g.
pydoc3 systemd.journal.Reader
or
firefox http://www.freedesktop.org/software/systemd/man/python-systemd/
Both gtk-doc and intltoolize have problems with VPATH builds.
"Creatively" disable tests when configuring from outside the
source directory.
This more-or-less reverts 9795da43c.
This patch only adds one line, but moves python detection
after cflags detection, so the result of the latter can
be used in the former.
$PYTHON_CFLAGS usually includes -D_FORTIFY_SOURCE, which will generate
a warning when compiling without optimization. Avoid by undefining
_FORTIFY_SOURCE.
