IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Define new unit parameter (LogFilterPatterns) to filter logs processed by
journald.
This option is used to store a regular expression which is carried from
PID1 to systemd-journald through a cgroup xattrs:
`user.journald_log_filter_patterns`.
Trying to disable a unit with no install info is mostly useless, so
adding a warning like we do for enable (with the new dbus method
'DisableUnitFilesWithFlagsAndInstallInfo()'). Note that it would
still find and remove symlinks to the unit in /etc, regardless of
whether it has install info or not, just like before. And if there are
actually files to remove, we suppress the warning.
Fixes#17689
The new function DumpPatterns() can be used to limit (drastically) the size of
the data returned by PID1. Hence the optimization of serializing data into a
file descriptor should be less relevant than having the possibility to limit
the data when communicating with the service manager remotely.
NB: when passing patterns, the dump command omits the version of the manager as
well as the features and the timestamps.
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
Follow-up for 10f3f4ed01.
We already have RuntimeWatchdogUSec or friends. Let's not introduce
redundant properties.
Also, drop the const qualifier for WatchdogLastPingTimestamp, as they
are actually not constant.
Not wired in by any unit type yet, just the basic to allocate,
ref, deref and plug in to other unit types.
Includes recording the trigger unit name and passing it to the
triggered unit as TRIGGER_UNIT= env var.
Do not go back to disk on each selinux access, but instead cache the
label off the inode we are actually reading. That way unit file contents
and unit file label we use for access checks are always in sync.
Based on discussions here:
https://github.com/systemd/systemd/pull/10023#issuecomment-1179835586
Replaces:
https://github.com/systemd/systemd/pull/23910
This changes behaviour a bit, because we'll reach and cache the label at
the moment of loading the unit (i.e. usually on boot and reload), but
not after relabelling. Thus, users must refresh the cache explicitly via
a "systemctl daemon-reload" if they relabelled things.
This makes the SELinux story a bit more debuggable, as it adds an
AccessSELinuxContext bus property to units that will report the label we are
using for a unit (or the empty string if not known).
This also drops using the "source" path of a unit as label source. if
there's value in it, then generators should manually copy the selinux
label from the source files onto the generated unit files, so that the
rule that "access labels are read when we read the definition files" is
upheld. But I am not convinced this is really a necessary, good idea.
In the welcome line, use NAME= as the fallback for PRETTY_NAME=.
PRETTY_NAME= doesn't have to be set, but NAME= should.
Example output:
---
Welcome to Fedora Linux 37 (Rawhide Prerelease)!
[ !! ] This OS version (Fedora Linux 37 (Rawhide Prerelease)) is past its end-of-support date (1999-01-01)
Queued start job for default target graphical.target.
[ OK ] Created slice system-getty.slice.
---
We had a description in README, and an outdated list in the man page.
I think we should keep a reference-style list in the man page. The description
in README is more free-form.
This reverts PR #22587 and its follow-up commit. More specifically,
2299b1cae3 (partially),
e176f85527,
ceb46a31a0, and
51bb9076ab.
The PR was merged without final approval, and has several issues:
- OSS fuzz reported issues in the conf parser,
- It calls synchrnous netlink call, it should not be especially in PID1,
- The importance of NFTSet for CGroup and DynamicUser may be
questionable, at least, there was no justification PID1 should support
it.
- For networkd, it should be implemented with Request object,
- There is no test for the feature.
Fixes#23711.
Fixes#23717.
Fixes#23719.
Fixes#23720.
Fixes#23721.
Fixes#23759.
New directive `DynamicUserNFTSet=` provides a method for integrating
configuration of dynamic users into firewall rules with NFT sets.
Example:
```
table inet filter {
set u {
typeof meta skuid
}
chain service_output {
meta skuid != @u drop
accept
}
}
```
```
/etc/systemd/system/dunft.service
[Service]
DynamicUser=yes
DynamicUserNFTSet=inet:filter:u
ExecStart=/bin/sleep 1000
[Install]
WantedBy=multi-user.target
```
```
$ sudo nft list set inet filter u
table inet filter {
set u {
typeof meta skuid
elements = { 64864 }
}
}
$ ps -n --format user,group,pid,command -p `pgrep sleep`
USER GROUP PID COMMAND
64864 64864 55158 /bin/sleep 1000
```
* Avoid traling slash as most links are defined without.
* Always use https:// protocol and www. subdomain
Allows for easier tree-wide linkvalidation
for our migration to systemd.io.
Backward incompatible change to avoid returning 'skipped' if a condition causes
a job activation to be skipped when using StartUnitWithFlags().
Job results are broadcasted, so it is theoretically possible that existing
software could get confused if they see this result.
Replaces https://github.com/systemd/systemd/pull/22369
When writing docs for SD_BUS_VTABLE_CAPABILITY, I noticed that we have one use
of SD_BUS_VTABLE_CAPABILITY(CAP_SYS_ADMIN) in the tree. This is the default, so
it's not very useful to specify it. But if we're touching that, I think it's
better to use mac + polkit for this like for everything else.
We don't have a very good category for this, but I don't think it makes sense
to add a new one. I just reused the same as other similar calls.
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.
The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
Add a new setting that follows the same principle and implementation
as ExtensionImages, but using directories as sources.
It will be used to implement support for extending portable images
with directories, since portable services can already use a directory
as root.
When an activation job is skipped because of a Condition*= setting failing,
currently the JobRemoved signal lists 'done' as the result, just as with
a successful job.
This is a problem when doing dbus activation: dbus-broker will receive a
signal that says the job was successful, so then it moves into a state where
it waits for the requested name to appear on the bus, but that never happens
because the job was actually skipped.
Add a new StartUnitWithFlags that changes the behaviour of the JobRemoved
signal to list 'done' or 'skipped'.
Fixes#21520
This introduces `ExitType=main|cgroup` for services.
Similar to how `Type` specifies the launch of a service, `ExitType` is
concerned with how systemd determines that a service exited.
- If set to `main` (the current behavior), the service manager will consider
the unit stopped when the main process exits.
- The `cgroup` exit type is meant for applications whose forking model is not
known ahead of time and which might not have a specific main process.
The service will stay running as long as at least one process in the cgroup
is running. This is intended for transient or automatically generated
services, such as graphical applications inside of a desktop environment.
Motivation for this is #16805. The original PR (#18782) was reverted (#20073)
after realizing that the exit status of "the last process in the cgroup" can't
reliably be known (#19385)
This version instead uses the main process exit status if there is one and just
listens to the cgroup empty event otherwise.
The advantages of a service with `ExitType=cgroup` over scopes are:
- Integrated logging / stdout redirection
- Avoids the race / synchronisation issue between launch and scope creation
- More extensive use of drop-ins and thus distro-level configuration:
by moving from scopes to services we can have drop ins that will affect
properties that can only be set during service creation,
like `OOMPolicy` and security-related properties
- It makes systemd-xdg-autostart-generator usable by fixing [1], as obviously
only services can be used in the generator, not scopes.
[1] https://bugs.kde.org/show_bug.cgi?id=433299
When combined with a tmpfs on /run or /var/lib, allows to create
arbitrary and ephemeral symlinks for StateDirectory or RuntimeDirectory.
This is especially useful when sharing these directories between
different services, to make the same state/runtime directory 'backend'
appear as different names to each service, so that they can be added/removed
to a sharing agreement transparently, without code changes.
An example (simplified, but real) use case:
foo.service:
StateDirectory=foo
bar.service:
StateDirectory=bar
foo.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:foo
bar.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:bar
foo and bar use respectively /var/lib/foo and /var/lib/bar. Then
the orchestration layer decides to stop this sharing, the drop-in
can be removed. The services won't need any update and will keep
working and being able to store state, transparently.
To keep backward compatibility, new DBUS messages are added.
