IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The old code was only able to pass the value 0 for the inheritable
and ambient capability set when a non-root user was specified.
However, sometimes it is useful to run a program in its own container
with a user specification and some capabilities set. This is needed
when the capabilities cannot be provided by file capabilities (because
the file system is mounted with MS_NOSUID for additional security).
This commit introduces the option --ambient-capability and the config
file option AmbientCapability=. Both are used in a similar way to the
existing Capability= setting. It changes the inheritable and ambient
set (which is 0 by default). The code also checks that the settings
for the bounding set (as defined by Capability= and DropCapability=)
and the setting for the ambient set (as defined by AmbientCapability=)
are compatible. Otherwise, the operation would fail in any way.
Due to the current use of -1 to indicate no support for ambient
capability set the special value "all" cannot be supported.
Also, the setting of ambient capability is restricted to running a
single program in the container payload.
For users, the square brackets already serve as markup and clearly delineate
the section name from surrounding text. Putting additional markup around that
only adds clutter. Also, we were very inconsistent in using the quotes. Let's
just drop them altogether.
systemd.nspawn(5) contained a partial repeat of the stuff that is now in the
dedicated man page. Let's just refer to that.
While at it, do s/searched/searched for/ where appropriate and reword some
sentences for brevity.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
They is quite a bit of those directives and they were in "MISCELLANEOUS" because
they don't quite fit anywhere. When the OCI-compat stuff is merged, there'll
be even more, so let's make a separate section for them.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Similar as the other options added before, this is primarily useful to
provide comprehensive OCI runtime compatbility, but might be useful
otherwise, too.
This simply controls the PR_SET_NO_NEW_PRIVS flag for the container.
This too is primarily relevant to provide OCI runtime compaitiblity, but
might have other uses too, in particular as it nicely complements the
existing --capability= and --drop-capability= flags.
Previously, the container's hostname was exclusively initialized from
the machine name configured with --machine=, i.e. the internal name and
the external name used for and by the container was synchronized. This
adds a new option --hostname= that optionally allows the internal name
to deviate from the external name.
This new option is mainly useful to ultimately implement the OCI runtime
spec directly in nspawn, but it might be useful on its own for some
other usecases too.
This ensures we set the various resource limits of our container
explicitly on each invocation so that we inherit less from our callers
into the payload.
By default resource limits are now set to the same values Linux
generally passes to the host PID 1, thus minimizing needless differences
between host and container environments.
The limits are now also configurable using a new --rlimit= switch. This
is preparation for teaching nspawn native OCI runtime support as OCI
permits setting resource limits for container payloads, and it hence
probably makes sense if we do too.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Now that we have ported nspawn's seccomp code to the generic code in
seccomp-util, let's extend it to support whitelisting and blacklisting
of specific additional syscalls.
This uses similar syntax as PID1's support for system call filtering,
but in contrast to that always implements a blacklist (and not a
whitelist), as we prepopulate the filter with a blacklist, and the
unit's system call filter logic does not come with anything
prepopulated.
(Later on we might actually want to invert the logic here, and
whitelist rather than blacklist things, but at this point let's not do
that. In case we switch this over later, the syscall add/remove logic of
this commit should be compatible conceptually.)
Fixes: #5163
Replaces: #5944
Add a new --pivot-root argument to systemd-nspawn, which specifies a
directory to pivot to / inside the container; while the original / is
pivoted to another specified directory (if provided). This adds
support for booting container images which may contain several bootable
sysroots, as is common with OSTree disk images. When these disk images
are booted on real hardware, ostree-prepare-root is run in conjunction
with sysroot.mount in the initramfs to achieve the same results.
This change documents the existance of the systemd-nspawn@.service template
unit file, which was previously not mentioned at all. Since the unit file uses
slightly different default than nspawn invoked from the command line, these
defaults are now explicitly documented too.
A couple of further additions and changes are made, too.
Replaces: #3497
This the patch implements a notificaiton mechanism from the init process
in the container to systemd-nspawn.
The switch --notify-ready=yes configures systemd-nspawn to wait the "READY=1"
message from the init process in the container to send its own to systemd.
--notify-ready=no is equivalent to the previous behavior before this patch,
systemd-nspawn notifies systemd with a "READY=1" message when the container is
created. This notificaiton mechanism uses socket file with path relative to the contanier
"/run/systemd/nspawn/notify". The default values it --notify-ready=no.
It is also possible to configure this mechanism from the .nspawn files using
NotifyReady. This parameter takes the same options of the command line switch.
Before this patch, systemd-nspawn notifies "ready" after the inner child was created,
regardless the status of the service running inside it. Now, with --notify-ready=yes,
systemd-nspawn notifies when the service is ready. This is really useful when
there are dependencies between different contaniers.
Fixes https://github.com/systemd/systemd/issues/1369
Based on the work from https://github.com/systemd/systemd/pull/3022
Testing:
Boot a OS inside a container with systemd-nspawn.
Note: modify the commands accordingly with your filesystem.
1. Create a filesystem where you can boot an OS.
2. sudo systemd-nspawn -D ${HOME}/distros/fedora-23/ sh
2.1. Create the unit file /etc/systemd/system/sleep.service inside the container
(You can use the example below)
2.2. systemdctl enable sleep
2.3 exit
3. sudo systemd-run --service-type=notify --unit=notify-test
${HOME}/systemd/systemd-nspawn --notify-ready=yes
-D ${HOME}/distros/fedora-23/ -b
4. In a different shell run "systemctl status notify-test"
When using --notify-ready=yes the service status is "activating" for 20 seconds
before being set to "active (running)". Instead, using --notify-ready=no
the service status is marked "active (running)" quickly, without waiting for
the 20 seconds.
This patch was also test with --private-users=yes, you can test it just adding it
at the end of the command at point 3.
------ sleep.service ------
[Unit]
Description=sleep
After=network.target
[Service]
Type=oneshot
ExecStart=/bin/sleep 20
[Install]
WantedBy=multi-user.target
------------ end ------------
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
The new switch operates like --network-veth, but may be specified
multiple times (to define multiple link pairs) and allows flexible
definition of the interface names.
This is an independent reimplementation of #1678, but defines different
semantics, keeping the behaviour completely independent of
--network-veth. It also comes will full hook-up for .nspawn files, and
the matching documentation.
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
