IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With this change, we add a new object to resolved, "DnsSearchDomain="
which wraps a search domain. This is then used to introduce a global
search domain list, in addition to the existing per-link search domain
list which is reword to make use of this new object too.
This is preparation for implement proper unicast DNS search domain
support.
This uses new functionality added in rpm 4.13. Instead of doing
one daemon-reload per packages, we do just one or two
(When both installing and uninstalling packages, we do
two. Unfortunately this also includes the common case of upgrades.
When only installing or when only installing, we do just one.)
New file triggers.systemd can be built, but the contents have
to be copied into the rpm spec file by hand. Using %{load} does
not seem to work. It can serve as documentation.
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes#1375, #1718, #1706
Check the base case, plus erasing the list, listing the same variable
name more than once and when variables are absent from the manager
execution environment.
Confirmed that `sudo ./test-execute` passes and that modifying the test
cases (or the values of the set variables in test-execute.c) is enough
to make the test cases fail.
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
* remove journal flushing (systemd-journal-flush.service runs journalctl --flush on boot)
* use sh -c and PATH instead of @SYSTEMCTL@ expansion
* remove unnecessary semicolons etc
It is really unclear if we want to / have the resources to support this fully, so drop it
for now. It can easily be brought back if a killer usecase emerges.
Note that this code was never hooked up, so this does not remove any features.
memory_erase() so far just called memset(), which the compiler might
optimize away under certain conditions if it feels there's benefit in
it. C11 knows a new memset_s() call that is like memset(), but may not
be optimized away. Ideally, we'd just use that call, but glibc currently
does not support it. Hence, implement our own simplistic version of it.
We use a GCC pragma to turn off optimization for this call, and also use
the "volatile" keyword on the pointers to ensure that gcc will use the
pointers as-is. According to a variety of internet sources, either one
does the trick. However, there are also reports that at least the
volatile thing isn't fully correct, hence let's add some snake oil and
employ both techniques.
https://news.ycombinator.com/item?id=4711346
Tests for the functions defined in src/basic/parse-util.c. Reorder them
to match the order in which the functions are defined in the source
file. Adjusted the list of include files to remove the ones no longer
needed in test-util.c.
Tested that `make check` still passes as expected. Also checked the
number of lines removed from test-util.c matches the expected, as an
additional verification that no tests were dropped or duplicated in the
move.
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
So far we had two pretty much identical calls in user-util.[ch]:
lookup_uid() and uid_to_name(). Get rid of the former, in favour of the
latter, and while we are at it, rewrite it, to use getpwuid_r()
correctly, inside an allocation loop, as POSIX intended.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
If SMACK is enabled, 'smackfsroot=*' option should be specified when
/tmp is mounted since many non-root processes use /tmp for temporary
usage. If not, /tmp is labeled as '_' and smack denial occurs when
writing.
In order to do that, 'SmackFileSystemRoot=*' is newly added into
tmp.mount.
The actual code rename will follow. The reason for the change of name is to make it
simpler and more uniform with how we name other libraries (we don't include the
underlying protocol). The new name also matches the naming in the kernel (which
is particularly relevent here as we expect to let the kernel do some parts of
the protocol and we do others).
This reverts commit 409c2a13fd.
It breaks the bootup of systems which enable smack at compile time, but have no
smack enabled in the kernel. This needs a different solution.
If SMACK is enabled, 'smackfsroot=*' option should be specified in
tmp.mount file since many non-root processes use /tmp for temporary
usage. If not, /tmp is labeled as '_' and smack denial occurs when
writing.
We don't use that anywhere any more. With the introduction of alias names it
also is not a proper mapping any more as several keys (e. g. KEY_COFFEE and
KEY_SCREENLOCK) have the same numerical mapping.
linux/input.h contains alias definitions like
#define KEY_COFFEE 152
#define KEY_SCREENLOCK KEY_COFFEE
#define KEY_ROTATE_DISPLAY 153
#define KEY_DIRECTION KEY_ROTATE_DISPLAY
But we ignored these when building keyboard-keys-list.txt. Also allow the value
to start with "K" now (for KEY_*), and drop the hardcoded COFFEE → SCREENLOCK
aliasing.
This fixes assignments to key "direction".
Fixes#1151
With this rework we introduce systemd-rfkill.service as singleton that
is activated via systemd-rfkill.socket that listens on /dev/rfkill. That
way, we get notified each time a new rfkill device shows up or changes
state, in which case we restore and save its current setting to disk.
This is nicer than the previous logic, as this means we save/restore
state even of rfkill devices that are around only intermittently, and
save/restore the state even if the system is shutdown abruptly instead
of cleanly.
This implements what I suggested in #1019 and obsoletes it.
And remove machine-id-commit as separate binary.
There's really no point in keeping this separate, as the sources are
pretty much identical, and have pretty identical interfaces. Let's unify
this in one binary.
Given that machine-id-commit was a private binary of systemd (shipped in
/usr/lib/) removing the tool is not an API break.
While we are at it, improve the documentation of the command substantially.
When a systemd service running in a container exits with a non-zero
code, it can be useful to terminate the container immediately and get
the exit code back to the host, when systemd-nspawn returns. This was
not possible to do. This patch adds the following to make it possible:
- Add a read-only "ExitCode" property on PID 1's "Manager" bus object.
By default, it is 0 so the behaviour stays the same as previously.
- Add a method "SetExitCode" on the same object. The method fails when
called on baremetal: it is only allowed in containers or in user
session.
- Add support in systemctl to call "systemctl exit 42". It reuses the
existing code for user session.
- Add exit.target and systemd-exit.service to the system instance.
- Change main() to actually call systemd-shutdown to exit() with the
correct value.
- Add verb 'exit' in systemd-shutdown with parameter --exit-code
- Update systemctl manpage.
I used the following to test it:
| $ sudo rkt --debug --insecure-skip-verify run \
| --mds-register=false --local docker://busybox \
| --exec=/bin/chroot -- /proc/1/root \
| systemctl --force exit 42
| ...
| Container rkt-895a0cba-5c66-4fa5-831c-e3f8ddc5810d failed with error code 42.
| $ echo $?
| 42
Fixes https://github.com/systemd/systemd/issues/1290
These programs should be run manually, typically two instances on a
veth pair to check conflict detection.
Both test programs take the ifname as input, the ACD also takes the
IP address to check, whereas LL (optionally) takes the seed, which
determines the sequence of IP addresses to try.
This splits the Address Conflict Detection out of the Link Local
library so that we can reuse it for DHCP and static addresses in
the future.
Implements RFC5227.
We currently process every ARP packet, but we should only care about the ones
relating to our IP address.
Also rename ipv4ll helpers to apr-utils.[ch], and rework the helpers a bit.
The current implementation directly monitor /proc/self/mountinfo and
/run/mount/utab files. It's really not optimal because utab file is
private libmount stuff without any official guaranteed semantic.
The libmount since v2.26 provides API to monitor mount kernel &
userspace changes and since v2.27 the monitor is usable for
non-root users too.
This patch replaces the current implementation with libmount based
solution.
Signed-off-by: Karel Zak <kzak@redhat.com>
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
Tests are modified to check behaviour with relax and without relax.
New tests are added for hostname_cleanup().
Tests are moved a new file (test-hostname-util) because there's
now a bunch of them.
New parameter is not used anywhere, except in tests, so there should
be no observable change.
This drops the libsystemd-terminal and systemd-consoled code for various
reasons:
* It's been sitting there unfinished for over a year now and won't get
finished any time soon.
* Since its initial creation, several parts need significant rework: The
input handling should be replaced with the now commonly used libinput,
the drm accessors should coordinate the handling of mode-object
hotplugging (including split connectors) with other DRM users, and the
internal library users should be converted to sd-device and friends.
* There is still significant kernel work required before sd-console is
really useful. This includes, but is not limited to, simpledrm and
drmlog.
* The authority daemon is needed before all this code can be used for
real. And this will definitely take a lot more time to get done as
no-one else is currently working on this, but me.
* kdbus maintenance has taken up way more time than I thought and it has
much higher priority. I don't see me spending much time on the
terminal code in the near future.
If anyone intends to hack on this, please feel free to contact me. I'll
gladly help you out with any issues. Once kdbus and authorityd are
finished (whenever that will be..) I'll definitely pick this up again. But
until then, lets reduce compile times and maintenance efforts on this code
and drop it for now.
This adds test-bus-proxy which should be used to test correct behavior of
systemd-bus-proxyd. The first test that was added is to verify we actually
receive NameAcquired signals for ourselves on bus-connect.
This target allows to trigger a build of $(BUILT_SOURCES) manually. This
is handy if you tend to use 'make systemd-foobar' to directly build a
single binary. Those do not pull in $(BUILT_SOURCES), unfortunately. See
automake docs for that.
autogen.sh, .dir-locals.el, .vimrc, .ycm_extra_conf.py, .travis.yml,
.mailmap files are only useful with the source tree, for the
developers. Do not install these files as documentation on the
end-user systems, but keep them distributed with the tarball.
The idea is that after adding a new man page, make update-man-list
will be used to regenerate part of the makefile. So the data already
present in the makefile cannot be used to do that.
Also, renames filter out generated xml files in make-man-rules.py
itself in order to make Makefile.am a bit simpler, and rename files
to dist_files to better reflect new meaning.
The main purpose of this hwdb was to tag touchpads that have the physical
trackstick buttons wired to the touchpad (Lenovo Carbon X1 3rd, Lenovo *50
series). This hwdb is not required on kernels 4.0 and above, the kernel now
re-routes button presses through the trackstick's device node. Userspace does
not need to do anything.
See kernel commit cdd9dc195916ef5644cfac079094c3c1d1616e4c.
This reverts commit 001a247324.
It is not udev's task to apply any of these setting that way, or
from udev rules files. Things need to be sortet out in the kernel,
or explicit whitelist can possibly be added to the hardware database.
Until that is sorted out, and general agreement, udev is not
willing to maintain any such lists or power management settings
in general.
"Thanks for digging this out! I thought my Kinesis keyboard got broken
and ordered a new one, only to find out that the new one doesn't work
as well. I'm not sure whether we should start collecting a blacklist
of keyboards which don't work with USB autosuspend, or rather a
whitelist? Or revert this wholesale?"
https://github.com/systemd/systemd/issues/340
Given that some symbols are exposed by multiple libraries (due to the
compatibility libraries), let's ensure "make check-api-docs" only shows
each symbol once by filtering out duplicates.
This change hooks up $(audit_list_includes) that was already
defined since the beginning of the audit type list, but never actually
made use of.
It thus completes 4733607eec.
It depends on man/custom-entities.ent which is (and needs to be) a built file,
so we need to always build man/systemd.directives.xml as well.
We also need to drop this from update-man-list so that it doesn't get disted
from Makefile-man.am.
Fixes distcheck failure.
https://github.com/systemd/systemd/issues/215
When calling the build commands from another directory than the toplevel:
mkdir build
cd build
../configure [...]
... the compilation fails with the following error:
GEN man/systemd.directives.xml
Traceback (most recent call last):
File "../tools/make-directive-index.py", line 313, in make_page
_extract_directives(directive_groups, formatting, page)
File "../tools/make-directive-index.py", line 191, in _extract_directives
t = xml_parse(page)
File "/home/martin/upstream/systemd/tools/xml_helper.py", line 30, in xml_parse
doc = tree.parse(page, _parser)
File "lxml.etree.pyx", line 3301, in lxml.etree.parse (src/lxml/lxml.etree.c:72453)
File "parser.pxi", line 1791, in lxml.etree._parseDocument (src/lxml/lxml.etree.c:105915)
File "parser.pxi", line 1817, in lxml.etree._parseDocumentFromURL (src/lxml/lxml.etree.c:106214)
File "parser.pxi", line 1721, in lxml.etree._parseDocFromFile (src/lxml/lxml.etree.c:105213)
File "parser.pxi", line 1122, in lxml.etree._BaseParser._parseDocFromFile (src/lxml/lxml.etree.c:100163)
File "parser.pxi", line 580, in lxml.etree._ParserContext._handleParseResultDoc (src/lxml/lxml.etree.c:94286)
File "parser.pxi", line 690, in lxml.etree._handleParseResult (src/lxml/lxml.etree.c:95722)
File "parser.pxi", line 618, in lxml.etree._raiseParseError (src/lxml/lxml.etree.c:94754)
OSError: Error reading file 'man/bootup.xml': failed to load external entity "man/bootup.xml"
That is because the file names in the XML_FILES array are not relative
to $(top_srcdir), and hence ../tools/make-directive-index.py is called
with non-existant arguments.
To fix this, call patsubst when generating SOURCE_XML_FILES from
NON_INDEX_XML_FILES.
./configure --enable/disable-kdbus can be used to set the default
behavior regarding kdbus.
If no kdbus kernel support is available, dbus-dameon will be used.
With --enable-kdbus, the kernel command line option "kdbus=0" can
be used to disable kdbus.
With --disable-kdbus, the kernel command line option "kdbus=1" is
required to enable kdbus support.
Remove old temporary snapshots, but only at boot. Ideally we'd have
"self-destroying" btrfs snapshots that go away if the last last
reference to it does. To mimic a scheme like this at least remove the
old snapshots on fresh boots, where we know they cannot be referenced
anymore. Note that we actually remove all temporary files in
/var/lib/machines/ at boot, which should be safe since the directory has
defined semantics. In the root directory (where systemd-nspawn
--ephemeral places snapshots) we are more strict, to avoid removing
unrelated temporary files.
This also splits out nspawn/container related tmpfiles bits into a new
tmpfiles snippet to systemd-nspawn.conf
Rename sd_rtnl to sd_netlink to prepare for further netlink-protocol support. Anything rtnl specific still uses the sd_rtnl prefix, but the generic parts (including the bus and message objects) are now called sd_netlink.
