IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Let's change from a fixed value of 12288 tasks per user to a relative value of
33%, which with the kernel's default of 32768 translates to 10813. This is a
slight decrease of the limit, for no other reason than "33%" sounding like a nice
round number that is close enough to 12288 (which would translate to 37.5%).
(Well, it also has the nice effect of still leaving a bit of room in the PID
space if there are 3 cooperating evil users that try to consume all PIDs...
Also, I like my bikesheds blue).
Since the new value is taken relative, and machined's TasksMax= setting
defaults to 16384, 33% inside of containers is usually equivalent to 5406,
which should still be ample space.
To summarize:
| on the host | in the container
old default | 12288 | 12288
new default | 10813 | 5406
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
Instead of KillOnlyUsers being a filter for KillUserProcesses, it can now be
used to specify users to kill, independently of the KillUserProcesses
setting. Having the settings orthogonal seems to make more sense. It also
makes KillOnlyUsers symmetrical to KillExcludeUsers.
This ensures that users sessions are properly cleaned up after.
The admin can still enable or disable linger for specific users to allow
them to run processes after they log out. Doing that through the user
session is much cleaner and provides better control.
dbus daemon can now be run in the user session (with --enable-user-session,
added in 1.10.2), and most distributions opted to pick this configuration.
In the normal case it makes a lot of sense to kill remaining processes.
The exception is stuff like screen and tmux. But it's easy enough to
work around, a simple example was added to the man page in previous
commit. In the long run those services should integrate with the systemd
users session on their own.
https://bugs.freedesktop.org/show_bug.cgi?id=94508https://github.com/systemd/systemd/issues/2900
The description in the man page was wrong, KillUserProcesses does
not kill all processes of the user. Describe what the setting
does, and also add links between the relavant sections of the
manual.
Also, add an extensive example which shows how to launch screen
in the background.
This new setting configures the TasksMax= field for the slice objects we
create for each user.
This alters logind to create the slice unit as transient unit explicitly
instead of relying on implicit generation of slice units by simply
starting them. This also enables us to set a friendly description for
slice units that way.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
This introduces 'HoldoffTimeoutSec' to logind.conf to make
IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable.
Background: If an external monitor is connected, or if the system is
docked, we want to ignore LID events. This is required to support setups
where a laptop is used with external peripherals while the LID is closed.
However, this requires us to probe all hot-plugged devices before reacting
to LID events. But with modern buses like USB, the standards do not impose
any timeout on the slots, so we have no chance to know whether a given
slot is used or not. Hence, after resume and startup, we have to wait a
fixed timeout to give the kernel a chance to probe devices. Our timeout
has always been generous enough to support even the slowest devices.
However, a lot of people didn't use these features and wanted to disable
the hold-off timer. Now we provide a knob to do that.
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
Several manpages contain duplicate text describing a standard set of .d
configuration directories, with the usual sorting, precedence,
overrides, and so on. Factor this common text out using XInclude before
proliferating it even further.
This makes it possible to drop in logind configuration snippets from a
package or other configuration management mechanism.
Add documentation to the header of /etc/logind.conf pointing the user at
/etc/logind.conf.d/*.conf.
Introduce a new helper, conf_parse_many, to parse configuration files in
a search path.
This way each user allocates from his own pool, with its own size limit.
This puts the size limit by default to 10% of the physical RAM size but
makes it configurable in logind.conf.
Previously we expected the desktop environment to take an inhibitor
lock, but this opened a race on boot-up where logind might already be
running but no DE is active.
Hence, let's move checking for additional displays into logind. This
also opens up this logic for other DEs, given that only GNOME
implemented the inhibitor logic so far.
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
Previously, if X allocated all 6 TTYs (for multi-session for example) no
getty would be available anymore to guarantee console-based logins.
With the new ReserveVT= switch in logind.conf we can now choose one VT
(6 by default) that will always be subject to autovt-style activation,
i.e. we'll always have a getty on TTY6, and X will never take possession
of it.
