IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a new target for synchronizing units that wish to run once during
the first boot of the system. The machine-id will be committed to disk
only after the target has been reached, thus ensuring that all units
ordered before it had a chance to complete.
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
bootctl implements three types of operation: those that work with an EFI
boot loader, those which work with any EFI boot loader that implements
the boot loader spec + interface, and finally those specific to sd-boot.
Previously the --help text and the man page mixed them all up. Let's put
them clearly in three separate sections however, to communicate clearly
what is supposed to work everywhere, and what is specific to
systemd-boot or boot loaders implementing the two specs.
This adjusts wording here and there, but is mostly just about
re-ordering existing docs, and putting them under new sections.
We would return ENOENT, which is extremely confusing. Strace is not helpful because
no *file* is actually missing. So let's add some logs at debug level and also use
a custom return code. Let all user-facing utilities print a custom error message
in that case.
The variable is renamed to SYSTEMD_PAGERSECURE (because it's not just about
less now), and we automatically enable secure mode in certain cases, but not
otherwise.
This approach is more nuanced, but should provide a better experience for
users:
- Previusly we would set LESSSECURE=1 and trust the pager to make use of
it. But this has an effect only on less. We need to not start pagers which
are insecure when in secure mode. In particular more is like that and is a
very popular pager.
- We don't enable secure mode always, which means that those other pagers can
reasonably used.
- We do the right thing by default, but the user has ultimate control by
setting SYSTEMD_PAGERSECURE.
Fixes#5666.
v2:
- also check $PKEXEC_UID
v3:
- use 'sd_pid_get_owner_uid() != geteuid()' as the condition
Also, document this functionality more prominently, including with a
reference from sd_event_exit().
This is mostly to make things complete, as previously we supported NULL
callbacks only in _add_time() and _add_signal(). However, I think this
makes snese for IO event sources too (think: when some fd such as a pipe
end sees SIGHUP or so, exit), as well as defer or post event sources (i.e. exit
once we got nothing else to do). This also adds support for inotify
event sources, simply to complete things (I can't see the immediate use,
but maybe someone else comes up with it).
The only event source type that doesn't allow callback=NULL now are exit
callbacks, but for them they make little sense, as the event loop is
exiting then anyway.
Some extra safety when invoked via "sudo". With this we address a
genuine design flaw of sudo, and we shouldn't need to deal with this.
But it's still a good idea to disable this surface given how exotic it
is.
Prompted by #5666
Currently systemd-detect-virt fails to detect running under PowerVM.
Add code to detect PowerVM based on code in util-linux.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
We have three somewhat separate ideas: what the directory is for, what $TMPDIR is for, and security considerations.
Let's use paragraphs.
Also, conjunctions in titles aren't capitalized usually.
Let's explicitly deactivate all home dirs on shutdown, in order to
properly synchronizing unmounting and avoiding blocking devices.
Previously, we'd rely on automatic deactivation when home directories
become unused. However, that scheme is asynchronous, and ongoing
deactviations might conflicts with attempts to unmount /home. Let's fix
that by providing an explicit service systemd-homed-activate.service
whose only job is to have a ExecStop= line that explicitly deactivates
all home directories on shutdown. This service can the be ordered after
home.mount and similar, ensuring that we'll first deactivate all homes
before deactivating /home itself during shutdown.
This is kept separate from systemd-homed.service so that it is possible
to restart systemd-homed.service without deactivating all home
directories.
Fixes: #16842
We should avoid duplicating lengthy description of very similar concepts.
--root-hash-sig follows the same semantics as RootHashSig=, so just refer
the reader to the other man page. --root-hash doesn't implement the same
features as RootHash=, so we can't fully replace the description, but let's
give the user a hint to look at the other man page too.
For #17177.
Also, reword the description a bit. "As a string" is meaningless in the context
of commandline arguments, where evyrything is a string. This is not a
strongly-typed programming language where 5 is a number but "5" is something
completely different. Here both 5 and "5" are indistinguishable. The original
text was trying to say that a location name should be given and not a number,
so say "time zone location name".
For #17177.
In table titles, capitalize only the first word (they are rather long and
it is easier to read when it looks like a normal sentence).
Adjust some phrases to make them clearer when reported as unclear in #17177.
It can be one of "foreign", "missing", "stub", "static", "uplink",
depending on how /etc/resolv.conf is set up:
foreign → someone/something else manages /etc/resolv.conf,
systemd-resolved is just the consumer
missing → /etc/resolv.conf is missing altogether
stub/static/uplink → the file is managed by resolved, with the
well-known modes
Fixes: #17159
It always was the intention to expose this as trusted field _TID=, i.e.
automatically determine it from journald via some SCM_xyz field or so,
but this is never happened, and it's unlikely this will be added anytime
soon to the kernel either, hence let's just generate this sender side,
even if it means it's untrusted.
Adds support for LUKS detached header device on kernel
command line. It's introduced via extension to existing
luks.options 'header=' argument beyond colon (see examples
below). If LUKS header device is specified it's expected
to contain filesystem with LUKS header image on a path
specified in the first part of header specification.
The second parameter 'luks.data' specifies LUKS data device
supposed to be paired with detached LUKS header (note that
encrypted LUKS data device with detached header is unrecognisable
by standard blkid probe).
This adds support for LUKS encrypted rootfs partition with
detached header. It can also be used for initializing online LUKS2
encryption of data device.
Examples:
luks.data=<luks_uuid>=/dev/sdz
luks.data=<luks_uuid>=/dev/vg/lv
luks.data=<luks_uuid>=/dev/mapper/lv
luks.data=<luks_uuid>=PARTUUID=<part_uuid>
luks.data=<luks_uuid>=PARTLABEL=<part_uuid>
luks.options=<luks_uuid>=header=/header/path:UUID=<fs_uuid>
luks.options=<luks_uuid>=header=/header/path:PARTUUID=<part_uuid>
luks.options=<luks_uuid>=header=/header/path:PARTLABEL=<part_label>
luks.options=<luks_uuid>=header=/header/path:LABEL=<fs_label>
luks.options=<luks_uuid>=header=/header/path:/dev/sdx
luks.options=<luks_uuid>=header=/header/path:/dev/vg/lv
The '/header/path' is considered to be relative location within
filesystem residing on the header device specified beyond colon
character
The directory backend needs a file system path, and not a raw block
device. That's only supported for the LUKS2 backend.
Let's make this clearer in the man page and also generate a better error
message if attempted anyway.
Fixes: #17068
By default we'll run a container in --console=interactive and
--console=read-only mode depending if we are invoked on a tty or not so
that the container always gets a /dev/console allocated, i.e is always
suitable to run a full init system /as those typically expect a
/dev/console to exist).
With the new --console=autopipe mode we do something similar, but
slightly different: when not invoked on a tty we'll use --console=pipe.
This means, if you invoke some tool in a container with this you'll get
full inetractivity if you invoke it on a tty but things will also be
very nicely pipeable. OTOH you cannot invoke a full init system like
this, because you might or might not become a /dev/console this way...
Prompted-by: #17070
(I named this "autopipe" rather than "auto" or so, since the default
mode probably should be named "auto" one day if we add a name for it,
and this is so similar to "auto" except that it uses pipes in the
non-tty case).
3e5f04bf64 was trying to do the right thing, but
the resulting list does not match the autogenerated order (which is the same as
the order in vtable definition). I assume the addition was done manually. Fix
the order so that dbus-docs-fresh test is not unhappy.
With new directive SystemCallLog= it's possible to list system calls to be
logged. This can be used for auditing or temporarily when constructing system
call filters.
---
v5: drop intermediary, update HASHMAP_FOREACH_KEY() use
v4: skip useless debug messages, actually parse directive
v3: don't declare unused variables with old libseccomp
v2: fix build without seccomp or old libseccomp
Define explicit action "kill" for SystemCallErrorNumber=.
In addition to errno code, allow specifying "kill" as action for
SystemCallFilter=.
---
v7: seccomp_parse_errno_or_action() returns -EINVAL if !HAVE_SECCOMP
v6: use streq_ptr(), let errno_to_name() handle bad values, kill processes,
init syscall_errno
v5: actually use seccomp_errno_or_action_to_string(), don't fail bus unit
parsing without seccomp
v4: fix build without seccomp
v3: drop log action
v2: action -> number
Mention the JSON user record stuff. Mention pam_umask explicitly.
Mention that UMask= of the per-user user@.service instance can be used
too.
Fixes: #16963
Heavily inspired by #15622. This adds:
systemctl service-log-level systemd-resolved
systemctl service-log-level systemd-resolved info
systemctl service-log-target systemd-resolved
systemctl service-log-target systemd-resolved console
We already have systemctl verbs log-level, log-target, and service-watchdogs.
Those two new verbs tie nicely into this scheme.
The manual states that a persistent timer triggers it's service
immediately on activation to catch up with missed invocations, but since
PR #11608 it is no longer the case if RandomizedDelaySec= is set to a
non-zero value.
Closes#12624.
The formatting in systemd.socket.xml is updated a bit.
Currently in_addr_port_ifindex_name_to_string() always prints the ifindex
numerically. This is not super useful since the interface numbers are
semi-random. Should we use interface names in preference?
KEY_RESTART is widely used in Linux to indicate device reboot.
So lets handle it in the same fashion as KEY_POWER.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The list was rather ad hoc, with "reset-failed" sandwiched between
"help" and "list-dependencies". Since a person will usually either want
to introspect state in various ways or modify state in a certain way, let's
put all the introspection commands together and all the ones that actually
have an effect second.
sd_seat_get_sessions() would return 0 in the 'n_uids' (now 'ret_n_uids') output
parameter when 'uid' (now 'ret_uids') was passed as NULL.
While at it, drop FOREACH_WORD() use.
Also use any whitespace as separator. In practice this shouldn't matter, since
logind always uses spaces, but it seems nicer to not specify this explicitly,
and the default is more flexible.
The new methods work as the unflavoured ones, but takes flags as a
single uint64_t DBUS parameters instead of different booleans, so
that it can be extended without breaking backward compatibility.
Add new flag to allow adding/removing symlinks in
[/etc|/run]/systemd/system.attached so that portable services
configuration files can be self-contained in those directories, without
affecting the system services directories.
Use the new methods and flags from portablectl --enable.
Useful in case /etc is read-only, with only the portable services
directories being mounted read-write.
Let's make sure the sd_listen_fd() docs are really found from the
.socket file documentation as well as the FileDescriptorStoreMax=
documentation.
Let's also emphasize that that's where the order in which the fds are
passed are documented.
Fixes: #16647
I started working on a command-line switch to show passwords also in
"pretty" mode. I can submit that code for review if anyone thinks that
woul be useful, but after writing the man page I realized that it's a
fairly niche case, and the hint in the man page is a sufficient
replacement.
Let's document the discrepancy between the Sec and USec suffixing of
unit files and D-Bus properties at three places: in "systemctl show"
(where it already was briefly mentioned), in the D-Bus interface
description (at one place at least, i.e. the most prominent of
properties that encapsulate time values, there are many more) and in the
general man page explaining time values.
By documenting this at all three places I think we now do as much as we
can do about this highlighting the discrepancy of the naming and the
reasons behind it.
Fixes: #2047
This makes use of the developer mode switch: the test is only done
if the user opted-in into developer mode.
Before the man/update-dbus-docs was using the argument form where
we don't need to run find_command(), but that doesn't work with test(),,
so find_command() is used and we get one more line in the config log.
The fix from cb263973ac was made the other way around,
i.e. `SIGKILL` was changed to `SIGUSR1`, but the sentence is about a "termination signal", i.e. `SIGKILL`, not `SIGUSR1`.
Commands like build/man/man journald.conf.d would show the installed
man page (or an error if the page cannot be found in the global search
path), and not the one in the build directory. If the man page is
a redirect, or the .html is a symlink, resolve it, build the target,
and show that.
Follow the same model established for RootImage and RootImageOptions,
and allow to either append a single list of options or tuples of
partition_number:options.
The concept is flawed, and mostly useless. Let's finally remove it.
It has been deprecated since 90a2ec10f2 (6
years ago) and we started to warn since
55dadc5c57 (1.5 years ago).
Let's get rid of it altogether.
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
Apparently both Fedora and suse default to btrfs now, it should hence be
good enough for us too.
This enables a bunch of really nice things for us, most importanly we
can resize home directories freely (i.e. both grow *and* shrink) while
online. It also allows us to add nice subvolume based home directory
snapshotting later on.
Also, whenever we mention the three supported types, alaways mention
them in alphabetical order, which is also our new order of preference.
The description didn't really explain how the distribution mechanism
works exactly and the relationship of leaf and slice units.
Update the documentation and also explicitly explain the expected
behaviour as it is created by the memory_recursiveprot cgroup2 mount
option.
This comes up occasionally with new users. The phrase "Logs begin ..." is
ambiguous because it can be taken to mean the logs being displayed or all logs
(the intended meaning). Let's rephrase this as "Journal begins ..." to make
this clearer.
I am pretty sure /etc/hosts (i.e. an explicitly configured, local,
trusted database) should be useful for overriding the automatic
myhostname logic.
resolved's internal logic handles it that way and hence we should
suggest it in the NSS fallback line, too.
Let's also bring the factory file back into sync with what the docs say.
And update the prose a bit too, to actually match what we recommend.
Follows the same pattern and features as RootImage, but allows an
arbitrary mount point under / to be specified by the user, and
multiple values - like BindPaths.
Original implementation by @topimiettinen at:
https://github.com/systemd/systemd/pull/14451
Reworked to use dissect's logic instead of bare libmount() calls
and other review comments.
Thanks Topi for the initial work to come up with and implement
this useful feature.
99e015e28c missed to update the example
below - DHCPv6.AssignAcquiredDelegatedPrefixAddress was moved to
DHCPv6PrefixDelegation.Assign.
As it already defaulted to true since it's introduction in
9efa8a3cff, there's no need to explicitly
list it at all.
Allows to specify mount options for RootImage.
In case of multi-partition images, the partition number can be prefixed
followed by colon. Eg:
RootImageOptions=1:ro,dev 2:nosuid nodev
In absence of a partition number, 0 is assumed.
