IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is like a really strong version of Wants=, that keeps starting the
specified unit if it is ever found inactive.
This is an alternative to Restart= inside a unit, acknowledging the fact
that whether to keep restarting the unit is sometimes not a property of
the unit itself but the state of the system.
This implements a part of what #4263 requests. i.e. there's no
distinction between "always" and "opportunistic". We just dumbly
implement "always" and become active whenever we see no job queued for
an inactive unit that is supposed to be upheld.
This is similar to OnFailure= but is activated whenever a unit returns
into inactive state successfully.
I was always afraid of adding this, since it effectively allows building
loops and makes our engine Turing complete, but it pretty much already
was it was just hidden.
Given that we have per-unit ratelimits as well as an event loop global
ratelimit I feel safe to add this finally, given it actually is useful.
Fixes: #13386
This takes inspiration from PropagatesReloadTo=, but propagates
stop jobs instead of restart jobs.
This is defined based on exactly two atoms: UNIT_ATOM_PROPAGATE_STOP +
UNIT_ATOM_RETROACTIVE_STOP_ON_STOP. The former ensures that when the
unit the dependency is originating from is stopped based on user
request, we'll propagate the stop job to the target unit, too. In
addition, when the originating unit suddenly stops from external causes
the stopping is propagated too. Note that this does *not* include the
UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT atom (which is used by BoundBy=),
i.e. this dependency is purely about propagating "edges" and not
"levels", i.e. it's about propagating specific events, instead of
continious states.
This is supposed to be useful for dependencies between .mount units and
their backing .device units. So far we either placed a BindsTo= or
Requires= dependency between them. The former gave a very clear binding
of the to units together, however was problematic if users establish
mounnts manually with different block device sources than our
configuration defines, as we there might come to the conclusion that the
backing device was absent and thus we need to umount again what the user
mounted. By combining Requires= with the new StopPropagatedFrom= (i.e.
the inverse PropagateStopTo=) we can get behaviour that matches BindsTo=
in every single atom but one: UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT is
absent, and hence the level-triggered logic doesn't apply.
Replaces: #11340
Let's add an implicit reverse dep OnFailureOf=. This is exposed via the
bus to make things more debuggable: you can now ask systemd for which
units a specific unit is the failure handler.
OnFailure= was the only dependency type that had no inverse, this fixes
that.
Now that deps are a bit cheaper, it should be OK to add deps that only
serve debug purposes.
The slice a unit is assigned to is currently a UnitRef reference. Let's
turn it into a proper dependency, to simplify and clean up code a bit.
Now that new dep types are cheaper, deps should generally be preferable
over everything else, if the concept applies.
This brings one major benefit: we often have to iterate through all unit
a slice contains. So far we iterated through all Before= dependencies of
the slice unit to achieve that, filtering out unrelated units, and
taking benefit of the fact that slice units are implicitly ordered
Before= the units they contain. By making Slice= a proper dependency,
and having an accompanying SliceOf= dependency type, this is much
simpler and nicer as we can directly enumerate the units a slice
contains.
The forward dependency is actually called InSlice internally, since we
already used the UNIT_SLICE name as UnitType field. However, since we
don't intend to expose the dependency to users as dep anyway (we already
have the regular Slice D-Bus property for this) this shouldn't matter.
The SliceOf= implicit dependency type (the erverse of Slice=/InSlice=)
is exported over the bus, to make things a bit nicer to debug and
discoverable.
Previously, when a link has already in a numbered group, we cannot
remove the link from the group.
This also fixes the range mentioned in the man page.
This is also not entirely obvious. I think the code I came
up with is pretty elegant ;] The final part of of the code that makes
use of the parsed data is kept very similar to the shell code on purpose,
even though it could be written a bit more idiomatically.
Let's order the fields from the most general to least: os name, os variant, os
version, machine-parseable version details, metadata, special settings. I added
section headers to roughly group the settings. The division is not strict,
because for example CPE_NAME also includes the version, and PRETTY_NAME may
too, but it still makes it easier to find the right name.
Also split out Examples to separate paragraphs:
almost all descriptions had "Example:" at the end, where multiple
examples were listed. Splitting this out to separate paragraphs
makes the whole thing much easier to read.
Add missing markup and punctuation while at it.
About
- If not set, defaults to <literal>NAME=Linux</literal>.
+ If not set, a default of <literal>NAME=Linux</literal> may be used.
and similar changes: in many circumstances, if this is not set, no value should
be used. The fallback mostly make sense when we need to present something to the
user. So let's reword this to not imply that the default is necessary.
With new "online state" semantics in networkd, make the description of
RequiredFamilyForOnline= a little more broad. Some rewording has been
done to make the passage easier to understand.
This doesn't matter too much, but makes things a bit more consistent.
A minor advantage is that the file is not a configuration file for meson
anymore, so:
a) It is not built unless pulled in by another target. Since
we don't usually build man pages by default, this saves a tiny
amount of work.
b) When the .in file is updated, meson does not reconfigure everything,
but just rebuilds the dependent targets.
Now that the conversion is finished, time for benchmarking:
a full build with default settings (and -Dstandalonebinaries=true), yields
before this pull request: 1687 targets, 148.13s user 35.17s system 317% cpu 57.697 total
with the full pull request: 1714 targets, 143.07s user 27.87s system 314% cpu 54.369 total
The difference doesn't seem significant. Partial rebuilds might be faster as
mentioned before.
I want to stop using 'substs'. But in this case, configure_file() is nicer
than custom_target(), because it causes meson to immediately generate the
helpers after configuration, so it's possible to do
'meson build && build/man/man ...', without building anything first.
We only substitute one variable here, so let's use a custom configuration_data()
object.
User managers always pass their environment on to their children.
Make that clear in the description of ManagerEnvironment= which
states that none of those args will get passed to child processes of
service managers.
Adds a crypttab option 'silent' that enables the AskPasswordFlag
ASK_PASSWORD_SILENT. This allows usage of systemd-cryptsetup to default
to silent mode, rather than requiring the user to press tab every time.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
The settings were listen in a completely random order, also different
between the v4 and v6 sections. Order by "options sent", "options received",
"communication settings" in both sections.
Also minor formatting changes are done, e.g. "=" is added in various places.
When `--json` option is specified, "status" and "list" commands gives
the same information, as originally "list" just gives partial
information of "status" in different format.
This was a copy/paste mistae apparently, there's not "try_authtok" and
this was supposed to copy what Fedora uses, which uses "use_authtok"
correctly. Hence adjust this.
Fixes: #19369
In most of our codebase when we referenced "ipv4" and "ipv6" on the
right-hand-side of an assignment, we lowercases it (on the
left-hand-side we used CamelCase, and thus "IPv4" and "IPv6"). In
particular all across the networkd codebase the various "per-protocol
booleans" use the lower-case spelling. Hence, let's use lower-case for
SocketBindAllow=/SocketBindDeny= too, just make sure things feel like
they belong together better.
(This work is not included in any released version, hence let's fix this
now, before any fixes in this area would be API breakage)
Follow-up for #17655
The directory might not be created in the ESP but in the extended boot
loader partition, hence don#t claim otherwise.
Also, give a brief reason why the concept exists at all.
Link up machine-id man page.
Follow-up for: 6a3fff75ba
