IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add 'reattach' verb to portablectl, and corresponding DBUS interface
to systemd-portabled.
Takes the same parameters as 'attach', but it will do a 'detach' (and
it will refuse to proceed if it cannot be done) first, matching on
the unversioned prefix of the new image. Eg:
portablectl reattach /tmp/foo_2.raw
will cause foo_1.raw to be detached, and foo_2.raw to be attached.
The key difference with a manual 'detach old' plus 'attach new' is that
the running units are not disturbed until after the attach completed,
and if --now is passed they are then restarted.
A 'detach' is not allowed normally if the units are running.
By using a restart-after-deploy method, 'reattach' allows for minimal
interruption of service and also for features that only work on restart
(eg: file descriptor store) to work as intended.
The DBUS interface returns two lists: first the removals from the detach
that were not immediately re-added in the attach, so that the caller
can stop the relevant units, and then the list of additions that are
either new or updates, so that the caller can restart/enable the
relevant units. portablectl already implements this with the existing
--now/--enable switches.
There may be situations where a cgroup should be protected from killing
or deprioritized as a candidate. In FB oomd xattrs are used to bias oomd
away from supervisor cgroups and towards worker cgroups in container
tasks. On desktops this can be used to protect important units with
unpredictable resource consumption.
The patch allows systemd-oomd to understand 2 xattrs:
"user.oomd_avoid" and "user.oomd_omit". If systemd-oomd sees these
xattrs set to 1 on a candidate cgroup (i.e. while attempting to kill something)
AND the cgroup is owned by root, it will either deprioritize the cgroup as
a candidate (avoid) or remove it completely as a candidate (omit).
Usage is restricted to root owned cgroups to prevent situations where an
unprivileged user can set their own cgroups lower in the kill priority than
another user's (and prevent them from omitting their units from
systemd-oomd killing).
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
machinectl fails since 21935150a0 as it's now
mounting onto a file descriptor in a target namespace, without joining the
target's PID namespace.
Note that it's not enough to setns CLONE_NEWPID, but a double-fork is required
as well, as implemented by namespace_fork().
Add a test case to TEST-13-NSPAWN to cover this use case.
This adds the ability to specify truncate:PATH for StandardOutput= and
StandardError=, similar to the existing append:PATH. The code is mostly
copied from the related append: code. Fixes#8983.
The commit 6f3ac0d517 drops the prefix and
suffix in TAGS= property. But there exists several rules that have like
`TAGS=="*:tag:*"`. So, the property must be always prefixed and suffixed
with ":".
Fixes#17930.
Fixes#17533
The memory pressure values of the units in TEST-56-OOMD seemed to be a
lot lower after updating to linux 5.9. This is likely due to a fix from
e22c6ed90a.
To account for this, I lowered memory.high on testbloat.service to
throttle it even more. This was enough to generate the 50%+ value to trigger
oomd for the test, but as an extra precaution I also lowered the oomd
threshold to 1% so it's certain to try and kill testbloat.service.
When tests are executed serially (the default), it seems better to launch
the fairly generic test that runs the unittests early in the sequence.
Right now the tests are ordered based on when they were written, but
this doesn't make much sense.
We have four legal cases:
1. /usr/lib/os-release exists and /etc/os-release is a symlink to it
2. both exist but /etc/os-release is not a symlink to /usr/lib/os-release
3. only /usr/lib/os-release exists
4. only /etc/os-release exists
The generic setup code in test-functions and create-busybox-image didn't handle
case 3.
The test-specific code in TEST-50 didn't handle 2 (because the general setup
code would only install /etc/os-release in the image and
grep -f /usr/lib/os-release would not work) and 4 (same reason) and would fail
in case 3 in generic setup.
Follow the same model established for RootImage and RootImageOptions,
and allow to either append a single list of options or tuples of
partition_number:options.
The sd_notify() socket that nspawn binds that the payload can use to
talk to it was previously stored in /run/systemd/nspawn/notify, which is
weird (as in the previous commit) since this makes /run/systemd
something that is cooperatively maintained by systemd inside the
container and nspawn outside of it.
We now have a better place where container managers can put the stuff
they want to pass to the payload: /run/host/, hence let's make use of
that.
This is not a compat breakage, since the sd_notify() protocol is based
on the $NOTIFY_SOCKET env var, where we place the new socket path.
Follows the same pattern and features as RootImage, but allows an
arbitrary mount point under / to be specified by the user, and
multiple values - like BindPaths.
Original implementation by @topimiettinen at:
https://github.com/systemd/systemd/pull/14451
Reworked to use dissect's logic instead of bare libmount() calls
and other review comments.
Thanks Topi for the initial work to come up with and implement
this useful feature.
Allows to specify mount options for RootImage.
In case of multi-partition images, the partition number can be prefixed
followed by colon. Eg:
RootImageOptions=1:ro,dev 2:nosuid nodev
In absence of a partition number, 0 is assumed.
Let's find the right os-release file on the host side, and only mount
the one that matters, i.e. /etc/os-release if it exists and
/usr/lib/os-release otherwise. Use the fixed path /run/host/os-release
for that.
Let's also mount /run/host as a bind mount on itself before we set up
/run/host, and let's mount it MS_RDONLY after we are done, so that it
remains immutable as a whole.
Opening a verity device is an expensive operation. The kernelspace operations
are mostly sequential with a global lock held regardless of which device
is being opened. In userspace jumps in and out of multiple libraries are
required. When signatures are used, there's the additional cryptographic
checks.
We know when two devices are identical: they have the same root hash.
If libcrypsetup returns EEXIST, double check that the hashes are really
the same, and that either both or none have a signature, and if everything
matches simply remount the already open device. The kernel will do
reference counting for us.
In order to quickly and reliably discover if a device is already open,
change the node naming scheme from '/dev/mapper/major:minor-verity' to
'/dev/mapper/$roothash-verity'.
Unfortunately libdevmapper is not 100% reliable, so in some case it
will say that the device already exists and it is active, but in
reality it is not usable. Fallback to an individually-activated
unique device name in those cases for robustness.
The kernel interface requires setting up read-only bind-mounts in
two steps, the bind first and then a read-only remount.
Fix nspawn-mount, and cover this case in the integration test.
Fixes#16484
