IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We already have a double timestamp object that we use whenever we need both a
MONOTONIC and a REALTIME timestamp taken and stored. With this change we
also add a triple timestamp object that in addition stores a BOOTTIME
timestamp, which is useful for a few usecases.
Note that we keep dual_timestamp around, as it is useful in many cases where
triple_timestamp is not, in particular because retrieving the monotonic and
realtime timestamps is much cheaper on Linux that getting the boottime
timestamp.
This also moves log message generation into manager_write_resolv_conf(), so
that it is shorter to invoke the function, given that we have to invoke it at a
couple of additional places now.
Fixes: #3225
Make sure we can parse DNS server addresses that use the "zone id" syntax for
local link addresses, i.e. "fe80::c256:27ff:febb:12f%wlp3s0", when reading
/etc/resolv.conf.
Also make sure we spit this out correctly again when writing /etc/resolv.conf
and via the bus.
Fixes: #3359
This basically reverts 7b2fd9d512 ("core:
remove duplicate code in automount_update_mount()").
This was not duplicate code. The expire_tokens need to be handled as well:
Send 0 == success for MOUNT_DEAD (umount successful), do nothing for
MOUNT_UNMOUNTING (not yet done) and an error for everything else.
Otherwise the automount logic will assume unmounting is not done and will
not send any new requests for mounting. As a result, the corresponding
mount unit is never mounted.
Without this, automounts with TimeoutIdleSec= are broken. Once the idle
timeout triggered a umount, any access to the corresponding filesystem
hangs forever.
Fixes#3332.
We generally only use "const" to constify the destination of pointers, but not
the pointers themselves, as they are copied anyway during C function
invocation. Hence, drop this usage of "const".
New exec boolean MemoryDenyWriteExecute, when set, installs
a seccomp filter to reject mmap(2) with PAGE_WRITE|PAGE_EXEC
and mprotect(2) with PAGE_EXEC.
Recently added cgroup unified hierarchy support uses "max" in configurations
for no upper limit. While consistent with what the kernel uses for no upper
limit, it is inconsistent with what systemd uses for other controllers such as
memory or pids. There's no point in introducing another term. Update cgroup
unified hierarchy support so that "infinity" is the only term that systemd
uses for no upper limit.
There are many cgroups-related changes (thanks, @htejun!)
This commit will simplify testing a bit.
Use:
make run UNIFIED_CGROUP_HIERARCHY=yes to enable cgroup-v2
make run UNIFIED_CGROUP_HIERARCHY=no to enable cgroup-v1
Write comments about "too many search domains" and "Total length of all search
domains is too long" just once. Also put it on a separate line, as
resolv.conf(5) only specifies comments in a line by themselves.
This is ugly to do if write_resolv_conf_search() gets called once for every
search domain. So change it to receive the complete OrderedSet instead and do
the iteration by itself.
Add test cases to networkd-test.py.
https://launchpad.net/bugs/1588229
Like many other recent thinkpads the factory default pointingstick
sensitivity on these devices is quite low, making the pointingstick
very slow in moving the cursor.
This extends the existing hwdb rules for tweaking the sensitivity to
also apply to the X1 carbon 4thgen model.
To accommodate changes in kernel interface, cgroup unified hierarchy support
added several configuration items which overlap with the existing resource
control settings and there is simple config translation between the overlapping
settings to ease the transition. As why certain cgroup knobs are being
configured can become confusing, this patch adds a master warning message which
is printed once when such translation is first used and logs each translation
with a debug message.
v2:
- Switched to log_unit*().
cgroup_context_apply() and friends take CGroupContext and cgroup path as input
and has no way of getting back to the associated Unit and thus uses raw cgroup
path for logging. This makes the log messages difficult to track down.
There's no reason to avoid passing in Unit into these functions. Pass in Unit
and use log_unit*() instead.
While at it, make cgroup_context_apply(), which has no outside users, static.
Also, drop cgroup path from log messages where the path itself isn't too
interesting and can be easily obtained from the unit.
For it's silly and unnecessary. Although it was apparently mandated by RFC 2462 in [5.5.2. Absence of Router Advertisements], that has been changed in the same section of RFC 4862, which obsoleted the former RFC.
In the same vein as commit ac59f0c12c which added
the --wait option to the emergency service, this patch makes sure that plymouth
has exited before entering into the rescue mode.
dhcp6_request_address() was merely a function to switch the DHCPv6 client from "stateless" mode to "stateful" mode. It was also a one-way switch. Also, to (re)start the client, we would need to repeat separate function calls.
In this patch, dhcp6_request_address() is made a general starter/manager of the DHCPv6 client. It now takes an extra parameter so we will be specifying which mode the DHCPv6 client should be started in. Also it will keep track of the current mode and compare with the newly requested mode, and only restart the client in case there is a difference between them.
This also makes sure that the DHCPv6 client will be (re)started accordingly as per the Router Advertisement flags.
systemctl --property doesn't validate if a requested property is valid or not,
and always returns with an exit code of 0, regardless of whether the requested
property exists or not.
How reproducible:
This works fine:
Id=multi-user.target
But put in a non-existing property:
Id=default.targets.service
Id=default.targets.service
0
[root@shou18lkvm8 ~]# systemctl show --property Id this.is.rubbish; echo $?
Id=this.is.rubbish.service
0
After:
sus@maximus bz-95593]$ ./systemctl show --property Id this.is.rubbish; echo $?
Can't display property this.is.rubbish. Unit this.is.rubbish.service does not
exist.
4
fixes#2295
This is redundant as SysV services get DefaultDependencides=yes anyway, and
thus conflict with shutdown.target anyway. Hence, let's simplify our code here.
Before:
[sus@maximus bz-1256858]$ systemctl status rsyslog.service;echo $?
● rsyslog.service - System Logging Service
Loaded: loaded (/usr/lib/systemd/system/rsyslog.service; enabled; vendor
preset: enabled)
Drop-In: /etc/systemd/system/rsyslog.service.d
└─50-CPUShares.conf
Active: inactive (dead) since Mon 2016-05-30 11:54:25 IST; 2h 26min ago
Docs: man:rsyslogd(8)
http://www.rsyslog.com/doc/
Process: 1159 ExecStart=/usr/sbin/rsyslogd -n $SYSLOGD_OPTIONS (code=exited,
status=0/SUCCESS)
Main PID: 1159 (code=exited, status=0/SUCCESS)
May 30 11:07:50 maximus systemd[1]: Starting System Logging Service...
May 30 11:07:50 maximus systemd[1]: Started System Logging Service.
May 30 11:54:25 maximus systemd[1]: Stopping System Logging Service...
May 30 11:54:25 maximus systemd[1]: Stopped System Logging Service.
3
[sus@maximus bz-1256858]$ systemctl status hello.service;echo $?
● hello.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
3
After:
$ ./systemctl status hello.service;echo $?
Failed to dump process list, ignoring: Access denied
● hello.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
4
[sus@maximus bz-1256858]$ ./systemctl status rsyslog.service;echo $?
Failed to dump process list, ignoring: Access denied
● rsyslog.service - System Logging Service
Loaded: loaded (/usr/lib/systemd/system/rsyslog.service; enabled; vendor
preset: enabled)
Drop-In: /etc/systemd/system/rsyslog.service.d
└─50-CPUShares.conf
Active: inactive (dead) since Mon 2016-05-30 11:54:25 IST; 2h 24min ago
Docs: man:rsyslogd(8)
http://www.rsyslog.com/doc/
Process: 1159 ExecStart=/usr/sbin/rsyslogd -n $SYSLOGD_OPTIONS (code=exited,
status=0/SUCCESS)
Main PID: 1159 (code=exited, status=0/SUCCESS)
May 30 11:07:50 maximus systemd[1]: Starting System Logging Service...
May 30 11:07:50 maximus systemd[1]: Started System Logging Service.
May 30 11:54:25 maximus systemd[1]: Stopping System Logging Service...
May 30 11:54:25 maximus systemd[1]: Stopped System Logging Service.
3
Fixes: 1092
Definitions of ReadWriteDirectories=, ReadOnlyDirectories=, InaccessibleDirectories=,
WorkingDirectory=, and RootDirecory= were not clear. This patch specifies when
they are relative to the host's root directory and when they are relative to the service's
root directory.
Fixes#3248
