IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Running both sd-ndisc and sd-radv should be mostly a misconfiguration,
but may not. So, let's only disable sd-ndisc by default when sd-radv is
enabled, but allow when both are explicitly requested.
Then, we can read the lease file on restart, and the DHCP server will be
able to manage previously assigned addresses.
To save leases in the state directory /var/lib/systemd/network/, this
adds systemd-networkd-dhcp-server.service, and by default
systemd-networkd does not start the DHCP server without the heler
service started.
Closes#29991.
This effectively reverts 9175002864.
The retrans time field in RA message is for neighbor solicitation,
and the commit d4c8de21a0 makes the value
assigned to the correct sysctl property.
Let's deprecate the option, and drop the redundant functions.
This deprecates IPForward= setting, which unconditionally controled
the global setting, even though it is a setting in .network file.
Instead, this introduces new IPv4Forwarding= and IPv6Forwarding=
settings both in .network and networkd.conf.
If these settings are specified in a .network file, then the
per-interface forwarding setting will be configured.
If specified in networkd.conf, then the global IP forwarding setting will
be configured.
Closes#30648.
The RA's Retransmission Timer field was being ignored. This resolves the IPv6
Core Conformance test, v6LC.2.1.5 [1].
Retransmission Timer is a 32-bit unsigned integer. The time, in milliseconds,
between retransmitted Neighbor Solicitation messages. Used by the Address
Resolution and Neighbor Unreachability Detection (NUD) algorithm.
Support setting a default value for the neighbour retransmission timer value with:
[Network]
IPv6RetransmissionTimeSec=<int>
By default, upon receiving a Router Advertisement with the Retransmission Timer
field set to a non-zero value, it will update the kernel's retransmit timer value.
To disable this behaviour, configure the UseIPv6RetransmissionTime= under the
[IPv6AcceptRA] section.
[IPv6AcceptRA]
UseIPv6RetransmissionTime=<bool>
RFC4861: Neighbor Discovery in IPv6
* Section 4.2 RA Message Format.
* Section 6.3.4 Processing Received Router Advertisements
A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time,
and Retrans Timer) may contain a value denoting that it is
unspecified. In such cases, the parameter should be ignored and the
host should continue using whatever value it is already using. In
particular, a host MUST NOT interpret the unspecified value as
meaning change back to the default value that was in use before the
first Router Advertisement was received.
The RetransTimer variable SHOULD be copied from the Retrans Timer
field, if the received value is non-zero.
References
[1] IPv6 Core Conformance Spec (PDF)
AllowList= and DenyList= filter only DHCPOFFER messages. So, if
RapidCommit= is enabled, then networkd unconditionally accepts a rapid
ACK message even if its sender is filtered out by the lists.
As AllowList=/DenyList= implemented earlier than RapidCommit=, so
enabling RapidCommit= unconditionally by default may break existing
setups that use AllowList=/DenyList=.
Let's disable RapidCommit= by default when AllowList=/DenyList= is
enabled. Still the setting can be enabled by setting explicitly even
AllowList=/DenyList= is also specified.
When an interface is being reconfigured with different bridge vlan
settings, this makes old vlan IDs on the interface removed.
This also makes the PVID= setting support negative boolean value, e.g. "no",
in which case, the currently assigned PVID (typically, assigned by the
kernel when an interface is joined to a bridge) is dropped.
This feature is requested by #15291.
Note, if a .network file has no settings about bridge vlan, networkd
keeps the currently assigned vlan IDs. That's intended, to make not
break existing setups.
When a .network file has only PVID=no line in [BridgeVLAN] section, then
all assigned vlan IDs are removed.
Fixes#29975.
Closes#15291.
This implements the DHCPv4 equivalent of the DHCPv6 Rapid Commit option,
enabling a lease to be selected in an accelerated 2-message exchange
instead of the typical 4-message exchange.
