1
0
mirror of https://github.com/systemd/systemd.git synced 2024-12-22 17:35:35 +03:00
Commit Graph

1755 Commits

Author SHA1 Message Date
Zbigniew Jędrzejewski-Szmek
a6d9111c67 core/execute: fall back to execve() for scripts
fexecve() fails with ENOENT and we need a fallback. Add appropriate test.
2020-11-06 15:14:13 +01:00
Lennart Poettering
fc8bc57f6b
Merge pull request #16968 from yuwata/remove-old-device-on-move-event
core, udev: remove old device on move event
2020-10-14 17:49:37 +02:00
Yu Watanabe
21266e60e9 test-network: add test for issue #17304 2020-10-13 20:32:17 +09:00
Yu Watanabe
d9005dec6e test-network: do not fail when multiple ipv6 default gateways are configured
When multiple ipv6 default gateways are set, kernel seems to merge them
into a multipath route.
2020-10-08 02:51:23 +09:00
Yu Watanabe
297f9d86fe test-network: add a test case for IPv4 route with IPv6 gateway 2020-10-08 02:51:13 +09:00
Yu Watanabe
0a2808a208 test-network: drop meaningless Scope= settings in the config 2020-10-07 15:22:10 +02:00
Yu Watanabe
66493453b3 test-network: also remove IPv6 rules 2020-10-07 03:23:27 +09:00
Yu Watanabe
713bfdaa6c test-network: add a missing netdev in the list 2020-10-07 03:23:27 +09:00
Yu Watanabe
47f8411249 test-network: disable RA in test_sriov
We usually disable IPv6AcceptRA= if the test does not require any
dynamic address configuration, as it makes slightly slow down the test.

C.f. 491b79aeac.
2020-10-07 03:23:27 +09:00
Yu Watanabe
5cf52d90a9 test-network: add missing file in the list 2020-10-07 03:23:27 +09:00
Yu Watanabe
6dcc637574 test-network: drop duplicated address 2020-10-07 03:23:27 +09:00
Lennart Poettering
c14ebe07a9
Merge pull request #17172 from keszybz/read-login-defs
Read /etc/login.defs
2020-10-02 11:01:30 +02:00
Zbigniew Jędrzejewski-Szmek
a3709e3709 tests: when creating temp dirs, include test name in path
This makes it easier to figure out which directory we want to look at
when tests fail, and also which test left behind a directory when it
shouldn't.
2020-10-01 19:53:45 +02:00
Zbigniew Jędrzejewski-Szmek
aa25270cb2 sysusers: look at login.defs when setting the default range to allocate users
Also, even if login.defs are not present, don't start allocating at 1, but at
SYSTEM_UID_MIN.

Fixes #9769.

The test is adjusted. Actually, it was busted before, because sysusers would
never use SYSTEM_GID_MIN, so if SYSTEM_GID_MIN was different than
SYSTEM_UID_MIN, the tests would fail. On all "normal" systems the two are
equal, so we didn't notice. Since sysusers now always uses the minimum of the
two, we only need to substitute one value.
2020-10-01 19:53:45 +02:00
Zbigniew Jędrzejewski-Szmek
044df624aa test-sysusers: fix how paths are calculated
We were looking at ${f%.*}, i.e. the $f with any suffix starting with a dot removed.
This worked fine for paths like /some/path/test-11.input. It also worked
for paths like /some/path/inline (there were no dots, so we got $f back unscathed).
But in the ubuntu CI the package is built in a temporary directory like
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build.UfW/ (yes, it has a dot, even two.).
That still worked for the first case, but in the second case we truncated things
after the first dot, and we would try to get
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build and try to load
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build.expected-password, which obviously
didn't work as expected. To avoid this issue, do the suffix removal only when
we know that there really is a suffix.

A second minor issue was that we would try to copy $1.expected-*, and sometimes
$1 would be given, and sometimes not. Effectively we were relying on there
not being any files matching .expected-*. There weren't any such files, but let's
avoid this ugliness and always pass $1.
2020-10-01 17:52:51 +02:00
Zbigniew Jędrzejewski-Szmek
69a7c5fb1f test-sysusers: sort examples
This shouldn't affect the outcome, but makes outputs easier to compare.
2020-10-01 17:52:51 +02:00
Zbigniew Jędrzejewski-Szmek
bd7e6aa73a test/TEST-21-SYSUSERS: turn into a unit test
All this test does is manipulate text files in a subdir specified with --testroot.
It can be a normal unittest without the overhead of creating a machine image.

As a bonus, also test the .standalone version.
2020-10-01 17:52:51 +02:00
Lennart Poettering
36296ae2ad
Merge pull request #17152 from keszybz/make-mountapivfs-default
Make MountAPIVFS=yes default
2020-10-01 11:00:02 +02:00
Zbigniew Jędrzejewski-Szmek
581b2c7359
Merge pull request #17132 from keszybz/test-suite-update
Test suite updates
2020-09-25 13:39:24 +02:00
Zbigniew Jędrzejewski-Szmek
9309a23b95 test: switch TEST-02-CRYPTSETUP and TEST-24-UNITTESTS
When tests are executed serially (the default), it seems better to launch
the fairly generic test that runs the unittests early in the sequence.
Right now the tests are ordered based on when they were written, but
this doesn't make much sense.
2020-09-24 17:02:20 +02:00
Zbigniew Jędrzejewski-Szmek
d583cf45b6 TEST-50-DISSECT: drop now-unneeded MountAPIVFS=yes and full paths to executables
With the previous changes we can simplify the invocations in the test a bit.
2020-09-24 10:03:18 +02:00
Zbigniew Jędrzejewski-Szmek
abf6346c5e test/run-integration-tests: do not run the tests if only "clean" is passed 2020-09-22 18:05:19 +02:00
Franck Bui
64a3494c3d udev: rename kernel option 'log_priority' into 'log_level'
Let's be consistent with the rest of the project.

'log_priority' is still supported for backward compatibility.
2020-09-22 09:05:57 +02:00
Yu Watanabe
e4c01fe6af test: add test cases for RuntimeDirectoryPreserve=yes 2020-09-18 13:11:39 +02:00
Zbigniew Jędrzejewski-Szmek
05d418fed9
Merge pull request #17085 from yuwata/network-configure-mdb-entries-on-bridge-master
network: allow to configure mdb entries on bridge master
2020-09-18 13:06:44 +02:00
Lennart Poettering
437d6de1fe
Merge pull request #17092 from keszybz/libtool-excorcism
Libtool excorcism
2020-09-18 10:14:09 +02:00
Yu Watanabe
1034044260
Merge pull request #15050 from ssahani/fq-pie
network: tc: add support for FQ-PIE packet scheduler
2020-09-18 03:50:02 +09:00
Zbigniew Jędrzejewski-Szmek
d688c5d653 mkosi: update rules in mkosi.default.networkd-test boot
We need to include ninja-build in the packages list because meson doesn't
depend on it (because it supports other backends too).

Also drop xz-devel, it's not crucial for the test.
2020-09-17 17:06:51 +02:00
Zbigniew Jędrzejewski-Szmek
050b4981e0 mkosi: stop pulling in libtool
Not useful since 72cdb3e783.
2020-09-17 16:08:41 +02:00
Yu Watanabe
dc0e90d2e0
Merge pull request #16929 from ssahani/network-bare-udp
network: introduce Bare UDP Tunnelling
2020-09-17 20:34:15 +09:00
Yu Watanabe
9f773037a0 test-network: add test for bridge MDB entries on bridge master 2020-09-17 18:15:25 +09:00
Yu Watanabe
1578266b02 test-network: add tests for FQ-PIE 2020-09-17 17:18:48 +09:00
Susant Sahani
8f6b6d7091 network: TC - introduce fq pie
see https://patchwork.ozlabs.org/patch/1233253/
2020-09-17 17:12:07 +09:00
Yu Watanabe
130604719a test-network: add tests for BareUDP netdev 2020-09-17 16:46:29 +09:00
Yu Watanabe
039971ea43 test-network: add test for Independent= for vxlan 2020-09-17 15:58:41 +09:00
Susant Sahani
a9b8450bd4 network: Allow vxlan to be created without .network file 2020-09-17 15:49:36 +09:00
Susant Sahani
e6980c7270 network: Introduce bare UDP 2020-09-17 15:05:58 +09:00
Yu Watanabe
cc0276cc3e test-network: add test for [BridgeMDB] section 2020-09-17 00:04:59 +09:00
Topi Miettinen
005bfaf118 exec: Add kill action to system call filters
Define explicit action "kill" for SystemCallErrorNumber=.

In addition to errno code, allow specifying "kill" as action for
SystemCallFilter=.

---
v7: seccomp_parse_errno_or_action() returns -EINVAL if !HAVE_SECCOMP
v6: use streq_ptr(), let errno_to_name() handle bad values, kill processes,
 init syscall_errno
v5: actually use seccomp_errno_or_action_to_string(), don't fail bus unit
parsing without seccomp
v4: fix build without seccomp
v3: drop log action
v2: action -> number
2020-09-15 12:54:17 +03:00
Yu Watanabe
41bed67613
Merge pull request #16998 from zonque/networkd/mdb
network: add support for setting MDB entries
2020-09-15 16:30:39 +09:00
Yu Watanabe
efdaeb88f0 test: add test for device renaming issue #16967 2020-09-15 11:29:38 +09:00
Yu Watanabe
766f8f388f test-network: add test for ENOBUFS issue #17012
The issue seems already fixed by PR #16982 and its follow-up commit
4934ba2121.
2020-09-11 18:07:47 +02:00
Daniel Mack
58695ed50a test: add BridgeMDB to fuzz-network-parser/directives.network 2020-09-10 18:55:20 +02:00
Yu Watanabe
87adeabfb7 test-network: update tests for issue #16784 2020-09-10 18:57:07 +09:00
Lennart Poettering
c6552f7cd5
Merge pull request #16955 from keszybz/test-execute-cleanup
One patch for test-execute and assorted cleanups
2020-09-08 18:33:12 +02:00
Yu Watanabe
68248f43fc test-network: add test for IPv6Token=prefixstable 2020-09-08 14:32:44 +09:00
Zbigniew Jędrzejewski-Szmek
a9030b81c1 udev-test: do not rely on "mail" group being defined
"audio" should be there, at least we declare it. "mail" nowadays is less
likely to exist than in the past.

Fixes one of the items in #16942.
2020-09-04 18:45:44 +02:00
Zbigniew Jędrzejewski-Szmek
0b3861d224 test-execute/exec-dynamicuser-statedir.service: fix quoting
All backslashes that should be single in shell syntax need to be written as "\\" because
our parser will remove one level of quoting. Also, single quotes were doubly nested, which
cannot work.

Should fix the following message:
test-execute/exec-dynamicuser-statedir.service:16: Ignoring unknown escape sequences: "test $$(find / \( -path /var/tmp -o -path /tmp -o -path /proc -o -path /dev/mqueue -o -path /dev/shm -o -path /sys/fs/bpf -o -path /dev/.lxc \) -prune -o -type d -writable -print 2>/dev/null | sort -u | tr -d \\n) = /var/lib/private/quux/pief/var/lib/private/waldo"
2020-09-04 18:11:22 +02:00
Zbigniew Jędrzejewski-Szmek
908dbc70d6
Merge pull request #16044 from ssahani/resolved-interface
systemd-resolved: allow configurable bind address
2020-09-03 19:06:05 +02:00
Susant Sahani
1f05101fb6 resolve: allow configurable bind address 2020-09-03 08:27:41 +00:00