IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This corresponds nicely with the specifiers we already pass for
/var/lib, /var/cache, /run and so on.
This is particular useful to update the test-path service files to
operate without guessable files, thus allowing multiple parallel
test-path invocations to pass without issues (the idea is to set $TMPDIR
early on in the test to some private directory, and then only use the
new %T or %V specifier to refer to it).
Usually, we order our settings in our unit files in a logical order,
grouping related settings together, and putting more relevant stuff
first, instead of following a strictly alphabetical order.
For specifiers I think it makes sense to follow an alphabetical order
however, since they literally are just characters, and hence I think the
concept of alphabetical ordering is much more commanding for them. Also,
since specifiers are usually not used in combination, but mostly used
indepdently of each other I think it's not that important to group
similar ones together.
No other changes except the reordering.
When dealing with a large number of template instances, for example
when launching daemons per VRF, it is hard for operators to correlate
log lines to arguments.
Add a new with-unit mode which, if available, prefixes unit and user
unit names when displaying its log messages instead of the syslog
identifier. It will also use the full timestamp with timezones, like
the short-full mode.
sysexits.h has:
#define EX_CANTCREAT 73 /* can't create (user) output file */
EX_DATAERR is a copy-paste error from the previous sentence, which is
correct.
Similar as the other options added before, this is primarily useful to
provide comprehensive OCI runtime compatbility, but might be useful
otherwise, too.
This simply controls the PR_SET_NO_NEW_PRIVS flag for the container.
This too is primarily relevant to provide OCI runtime compaitiblity, but
might have other uses too, in particular as it nicely complements the
existing --capability= and --drop-capability= flags.
Previously, the container's hostname was exclusively initialized from
the machine name configured with --machine=, i.e. the internal name and
the external name used for and by the container was synchronized. This
adds a new option --hostname= that optionally allows the internal name
to deviate from the external name.
This new option is mainly useful to ultimately implement the OCI runtime
spec directly in nspawn, but it might be useful on its own for some
other usecases too.
This ensures we set the various resource limits of our container
explicitly on each invocation so that we inherit less from our callers
into the payload.
By default resource limits are now set to the same values Linux
generally passes to the host PID 1, thus minimizing needless differences
between host and container environments.
The limits are now also configurable using a new --rlimit= switch. This
is preparation for teaching nspawn native OCI runtime support as OCI
permits setting resource limits for container payloads, and it hence
probably makes sense if we do too.
What the man page said was different than what the code did.
save_external_coredump() will store the core temporarily for backtrace
generation, and will delete if afterwards if it is too large. So to disable
processing, it's necessary to both set
Storage=none/Storage=journal+JournalSizeMax=0/Storage=external+ExternalSizeMax=0
and ProcessSizeMax=0. This updates the man page to reflect the code.
The man pages are extended to describe that Storage=none + ProcessSizeMax=0 is
the simplest way to disable coredump processing. All the storage and processing
options make this quite complicated, so let's add a copy-and-pasteable example
of how to disable coredump. Doing it through coredump.conf has the advantage
that we still log, and the effect is immediate, unlike masking the sysconf
file.
Fixes#8788.
Commenting out "WatchdogTimeout=3min" in systemd-logind.service causes
NotifyAccess to go from "main" to "none", breaking support for logind
restart. Let's fix that.
Since StandardOutput=file:path is more similar to StandardInput= than
StandardInputText=, and only StandardInput= is actually documented above
StandardOutput= whereas StandardInputText= is documented below it, I
assume the intention was to refer to the former.
While set of systemd-journal-{gatewayd,remote,upload}.service services presents single subsystem on journald logs network transmission, systemd-journal-gatewayd.service description should also contain links to other parts of this subsystem: systemd-journal-remote.service and systemd-journal-upload.service.
* man: systemd-networkd-wait-online: systemd.service
While service type is mentioned (is a oneshot system service), link on systemd.service is added. 'See Also' section is also updated with link on systemd.service man-page.
Added short keys -u and -m for --unescape and --mangle respectively. These short keys are present in systemd-escape --help output and are absent in man systemd-escape page.
Add journal-upload.conf refentrytitle to have the same format to systemd-journal-remote.service description, which contains refentrytitle on journal-remote.conf in 'See Also' section.
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Our CODING_STYLE document suggests to suffix all paths referring to dirs
rather than regular files with a "/" in our docs and log messages.
Update file-hierarchy(7) to do just that.
No other changes.
We document this further down in the text, but let's also list this
early on, where we mention the FHS as major influence too, so that it is
clear we incorporate all that thinking.
Previously, reading through systemd.exec(5) one might get the idea that
XDG_SEAT and XDG_VTNR are part of the service management logic, but they
are not, they are only set if pam_systemd is part of a PAM stack an
pam_systemd is used.
Hence, let's drop these env vars from the list of env vars, and instead
add a paragraph after the list mentioning that pam_systemd might add
more systemd-specific env vars if included in the PAM stack for a
service that uses PAMName=.
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
This implements similar logic as conf_files_cat(), but with slightly different
file gathering logic. I also want to add support for replacement files later on,
so it seems better to keep those two file-gathering functions separate.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This removes the UserTasksMax= setting in logind.conf. Instead, the generic
TasksMax= setting on the slice should be used. Instead of a transient unit we
use a drop-in to tweak the default definition of a .slice. It's better to use
the normal unit mechanisms instead of creating units on the fly. This will also
make it easier to start user@.service independently of logind, or set
additional settings like MemoryMax= for user slices.
The setting in logind is removed, because otherwise we would have two sources
of "truth": the slice on disk and the logind config. Instead of trying to
coordinate those two sources of configuration (and maintainer overrides to
both), let's just convert to the new one fully.
Right now now automatic transition mechanism is provided. logind will emit a
hint when it encounters the setting, but otherwise it will be ignored.
Fixes#2556.
Those are quite similar to %i/%I, but refer to the last dash-separated
component of the name prefix.
The new functionality of dash-dropins could largely supersede the template
functionality, so it would be tempting to overload %i/%I. But that would
not be backwards compatible. So let's add the two new letters instead.
The description in the man page disagreed with the code. Let the code win,
since if anybody is using this, they are more likely to depend on actual
behaviour rather than the docs. (In Fedora workstation installation there's
only one use, and it doesn't make much sense either way: SyslogIdentifier=%N
in xfs_scrub@.service.)
Also adds dots at the end everywhere, because we have multiple sentences in
some explanations, so we need dots.
- Add a new flag --strict to tell systemd-hwdb to return a
non-zero code on error.
- Make systemd-hwdb update return an error when any parsing
error occurs (only if strict flag is set).
Newer terminals (in particular gnome-terminal) understand special escape
sequence for formatting clickable links. Let's support that to make our
tool output more clickable where that's appropriate.
For details see this:
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
The one big issue is that 'less' currently doesn't grok this, and
doesn't ignore sequence like regular terminal implementations do if they
don't support it. Hence for now, let's disable URL output if a pager is
used. We should revisit that though as soon as less added support for it
and enough time passed for it to enter various distributions.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
First of all, it's frickin' ugly and wrong, as IPC sockets should be
placed in /run and definitely not under a guessable name under
world-writable /tmp. Secondly, it can't even work as we set
PrivateTmp=yes on the service.
Hence, let's clean up the example, and simply use a socket in /run
instead.
Fixes: #8419
We have a common parser, but for the user it might be
completely unobvious that the same general rules apply
to all those files. Let's add a page about the basic syntax
so that the more specific pages don't have to repeat those
details.
Absolute paths make everything simple and quick, but sometimes this requirement
can be annoying. A good example is calling 'test', which will be located in
/usr/bin/ or /bin depending on the distro. The need the provide the full path
makes it harder a portable unit file in such cases.
This patch uses a fixed search path (DEFAULT_PATH which was already used as the
default value of $PATH), and if a non-absolute file name is found, it is
immediately resolved to a full path using this search path when the unit is
loaded. After that, everything behaves as if an absolute path was specified. In
particular, the executable must exist when the unit is loaded.
Systems that have an accurate real-time clock may have an initial
unsynchronized time that is close enough to the synchronized time that
the final adjustment doesn't trigger a waking "clock set" event. Have
timesyncd touch a file in its runtime directory as a secondary signal
for synchronization. Continue to support the timerfd-based trigger as a
sufficient condition when the watchfile is not present.
Closes issue #8683
Clarify the helper/checker terminology in the systemd-fsck@.service manpage to
make the description more clear about what is responsible for deciding if a filesystem
needs checking.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Things can fail, and we have no control over it:
- file system issues (immutable bits, file system errors, MAC refusals, etc)
- kernel refusing certain arguments when writing to /proc/sys or /sys
Let's add a new code for the case where we parsed configuration but failed
to execute it because of external errors.
Fixes#5387.
I kept the _SYSTEMD_UNIT= example because it is easy to understand and
not very verbose. _SYSTEMD_CGROUP has much longer entries which do not
fit well in the narrow man page. Instead, I added an explanation of what
-u is translated into.
Issue #6673 requests advice on backup strategy. But the right backup strategy
depends on many factors, too many to describe in a man page. So let's just
provide some general information which files are mutable and that it is always
safe to use/copy files.
Closes#6673.
Issue #6499 requests that a mention that those varibles can be set in the
environment is added. But the man page already says that. There isn't much
detail, but a man page does not need to and in this case should not include
all the details. Instead a note is added that those vars can be derived from
$DISPLAY.
Closes#6499.
We're moving towards just SPDX license identifiers, and the boilerplate
is especially annoying in a man page. Also adjust to the smaller indentation
to make the code fit better on a page.
man/.dir-locals is to keep indentation under control.
This makes it much easier to compile and run those examples, c.f. #7578.
v2:
- copy more of .dir-locals.el from the root to man/.dir-locals.el
(I though emacs would inherit from the one in the parent dir, but
it seems it just uses its own broken defaults, including
indent-tabs-mode by default.)
Support was killed in kernel 4.15 as well as ethtool 4.13.
Justification was lack of use by drivers and too much of a maintenance burden.
https://www.spinics.net/lists/netdev/msg443815.html
Also moved config_parse_warn_compat to conf-parser.[ch] to fix compile errors.
This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
This PR implements the first part of RFE #8046. I.e. this allows to
write:
```
u username -:300
```
Where the uid is chosen automatically but the gid is fixed.
In particular:
- drop "when it is non-zero" to avoid implying that it can be called if the
queue is not empty.
- "has been created" sounds like something happened in parallel,
but what we really mean is that *this* particular object *was* created in a
certain way.
NAME is kind of meaningless, because everything has a name. "Unit"
makes it more obvious that a name of a unit is necessary. I was always
momentarily baffled by "set-property NAME ASSIGNMENT...", where there
are two objects (the unit and the property), and it's not clear which of
the two "NAME" is supposed to signify.
Before this change all unit types would default to "private" in the
system service manager and "inherit" to in the user service manager.
With this change this is slightly altered: non-service units of the
system service manager are now run with KeyringMode=shared. This appears
to be the more appropriate choice as isolation is not as desirable for
mount tools, which regularly consume key material. After all mounts are
a shared resource themselves as they appear system-wide hence it makes a
lot of sense to share their key material too.
Fixes: #8159
After discussions with @htejun it appears it's OK now to enable memory
accounting by default for all units without affecting system performance
too badly. facebook has made good experiences with deploying memory
accounting across their infrastructure.
This hence turns MemoryAccounting= from opt-in to opt-out, similar to
how TasksAccounting= is already handled. The other accounting options
remain off, their performance impact is too big still.
This change adds support for controlling the suspend-on-lid-close
behaviour based on the power status as well as whether the machine is
docked or has an external monitor. For backwards compatibility the new
configuration file variable is ignored completely by default, and must
be set explicitly before being considered in any decisions.
So far we didn't document control, transient, dbus config, or generator paths.
But those paths are visible to users, and they need to understand why systemd
loads units from those paths, and how the precedence hierarchy looks.
The whole thing is a bit messy, since the list of paths is quite long.
I made the tables a bit shorter by combining rows for the alternatives
where $XDG_* is set and the fallback.
In various places, tags are split like <element
param="blah">
this. This is necessary to keep everyting in one logical XML line so that
docbook renders the table properly.
Replaces #8050.
There are cases that we want to trigger and settle only specific
commands. For example, let's say at boot time we want to make sure all
the graphics devices are working correctly because it's critical for
booting, but not the USB subsystem (we'll trigger USB events later). So
we do:
udevadm trigger --action="add" --subsystem-match="graphics"
udevadm settle
However, we cannot block the kernel from emitting kernel events from
discovering USB devices. So if any of the USB kernel event was emitted
before the settle command, the settle command would still wait for the
entire queue to complete. And if the USB event takes a long time to be
processed, the system slows down.
The new `settle` option allows the `trigger` command to wait for only
the triggered events, and effectively solves this problem.
CAP_ADMIN does not exist (the closest existing capability name would be
CAP_SYS_ADMIN), and according to man:open(2) and man:capabilities(7),
the capability required to specify O_NOATIME is actually CAP_FOWNER.
Remote= must be a non multicast address. ip-link(8) says:
> remote IPADDR - specifies the unicast destination IP address to
> use in outgoing packets when the destination link layer address
> is not known in the VXLAN device forwarding database.
Closes#8088.
Changed <filename>.service</filename> to <literal>.service</literal> to match style in other manual pages: man 5 systemd.socket, device, mount, automount, swap, target path, timer, slice and scope.
Changed "reboot" to "power off" in poweroff.target description. It was most likely copied and pasted from the reboot.target below, compare with e.g. halt.target
This documents how the age of a file is determined, which previously was
only alluded to in other parts of the documentation. Fixes#8091.
The phrasings of “last modification timestamp” etc. are taken from
man:inode(7) (as of man-pages 4.14). The debug messages in tmpfiles.c
use different messages (“modify time”), which according to a code
comment follow man:stat(1); however, my copy of that manpage (from GNU
coreutils 8.29) documents %y as “time of last data modification”
instead.
The VDSO provided by the kernel for x32, uses x86-64 syscalls instead of
x32 ones.
I think we can safely allow this; the set of x86-64 syscalls should be
very similar to the x32 ones. The real point is not to allow *x86*
syscalls, because some of those are inconveniently multiplexed and we're
apparently not able to block the specific actions we want to.
When used in a package installation script, we want to invoke systemd-sysusers
before that package is installed (so it can contain files owned by the newly
created user), so the configuration to use is specified on the command
line. This should be a copy of the configuration that will be installed as
/usr/lib/sysusers.d/package.conf. We still want to obey any overrides in
/etc/sysusers.d or /run/sysusers.d in the usual fashion. Otherwise, we'd get a
different result when systemd-sysusers is run with a copy of the new config on
the command line and when systemd-sysusers is run at boot after package
instalation. In the second case any files in /etc or /run have higher priority,
so the same should happen when the configuration is given on the command line.
More generally, we want the behaviour in this special case to be as close to
the case where the file is finally on disk as possible, so we have to read all
configuration files, since they all might contain overrides and additional
configuration that matters. Even files that have lower priority might specify
additional groups for the user we are creating. Thus, we need to read all
configuration, but insert our new configuration somewhere with the right
priority.
If --target=/path/to/file.conf is given on the command line, we gather the list
of files, and pretend that the command-line config is read from
/path/to/file.conf (doesn't matter if the file on disk actually exists or
not). All package scripts should use this option to obtain consistent and
idempotent behaviour.
The corner case when --target= is specified and there are no positional
arguments is disallowed.
v1:
- version with --config-name=
v2:
- disallow --config-name= and no positional args
v3:
- remove --config-name=
v4:
- add --target= and rework the code completely
v5:
- fix argcounting bug and add example in man page
v6:
- rename --target to --replace
If the configuration is included in a script, this is more convient.
I thought it would be possible to use this for rpm scriptlets with
'%pre -p systemd-sysuser "..."', but apparently there is no way to pass
arguments to the executable ($1 is used for the package installation count).
But this functionality seems generally useful, e.g. for testing and one-off
scripts, so let's keep it.
There's a slight change in behaviour when files are given on the command line:
if we cannot parse them, error out instead of ignoring the failure. When trying
to parse all configuration files, we don't want to fail even if some config
files are broken, but when parsing a list of items specified explicitly, we
should.
v2:
- rename --direct to --inline
> Only system calls of the *specified* architectures will be permitted to
> processes of this unit.
(my emphasis)
> Note that setting this option to a non-empty list implies that
> native is included too.
Attempting to use "implies" in the later sentence, in a way that
contradicts the very clear meaning of the earlier sentence... it's too
much.
Case sensitive or case insensitive matching can be requested using
--case-sensitive[=yes|no].
Unless specified, matching is case sensitive if the pattern contains any
uppercase letters, and case insensitive otherwise. This matches what
forward-search does in emacs, and recently also --ignore-case in less. This
works surprisingly well, because usually when one is wants to do case-sensitive
matching, the pattern is usually camel-cased. In the less frequent case when
case-sensitive matching is required with an all-lowercase pattern,
--case-sensitive can be used to override the automatic logic.
This PR allows to write sysuser.conf lines like:
```
u games 5:60 -
```
This will create an a "games" user with uid 5 and games group with
gid 60. This is arguable ugly, however it is required to represent
certain configurations like the default passwd file on Debian and
Ubuntu.
When the ":" syntax is used and there is a group with the given
gid already then no new group is created. This allows writing the
following:
```
g unrelated 60
u games 5:60 -
```
which will create a "games" user with the uid 5 and the primary
gid 60. No group games is created here (might be useful for [1]).
[1] https://pagure.io/packaging-committee/issue/442
CHANGE OF BEHAVIOUR — with this commit "f" line's behaviour is altered
to match what the documentation says: if an "argument" string is
specified it is written to the file only when the file didn't exist
before. Previously, it would be appended to the file each time
systemd-tmpfiles was invoked — which is not a particularly useful
behaviour as the tool is not idempotent then and the indicated files
grow without bounds each time the tool is invoked.
I did some spelunking whether this change in behaviour would break
things, but afaics nothing relies on the previous O_APPEND behaviour of
this line type, hence I think it's relatively safe to make "f" lines
work the way the docs say, rather than adding a new modifier for it or
so.
Triggered by:
https://lists.freedesktop.org/archives/systemd-devel/2018-January/040171.html
Currently, we create leading directories implicitly for all lines that
create directory or directory-like nodes.
With this, we also do the same for a number of other lines: f/F, C, p,
L, c/b (that is regular files, pipes, symlinks, device nodes as well as
file trees we copy).
The leading directories are created with te default access mode of 0755.
If something else is desired, users should simply declare appropriate
"d" lines.
Fixes: #7853
New debug verb that enables or disables the service runtime watchdogs
and emergency actions during runtime. This is the systemd-analyze
version of the systemd.service_watchdogs command line option.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
sd_journal_stream_fd() does not return the same file descriptor across
different calls. It can't possibly do so, because the file descriptor
is created using certain parameters passed by the caller.
Also the implementation clearly isn't doing this, it's just connecting
to a unix socket.
It opens exactly one file descriptor, and does not close it unless there
is a write failure. Nothing like "temporarily multiple file descriptors
may be open".
These restrictions are implied by systemd options used for
systemd-udevd.service, i.e. MountFlags=slave and
IPAddressDeny=any. However, there are users out there getting tripped by
this, so let's make things clear in the man page so the actual
restrictions we implement by default have better visibility.
Follow-up for e79eabdb1b. There was an
apparent contradiction:
man/systemd.unit says for Requires=:
Besides, with or without specifying After=, this unit will be deactivated
if one of the other units get deactivated.
Also, some unit types may deactivate on their own (for example, a service
process may decide to exit cleanly, or a device may be unplugged by the
user), which is not propagated to units having a Requires= dependency.
Fixes#7870.
Let's be more restrictive when validating PID files and MAINPID=
messages: don't accept PIDs that make no sense, and if the configuration
source is not trusted, don't accept out-of-cgroup PIDs. A configuratin
source is considered trusted when the PID file is owned by root, or the
message was received from root.
This should lock things down a bit, in case service authors write out
PID files from unprivileged code or use NotifyAccess=all with
unprivileged code. Note that doing so was always problematic, just now
it's a bit less problematic.
When we open the PID file we'll now use the CHASE_SAFE chase_symlinks()
logic, to ensure that we won't follow an unpriviled-owned symlink to a
privileged-owned file thinking this was a valid privileged PID file,
even though it really isn't.
Fixes: #6632
The new --uid= switch allows selecting the UID from which the
notificaiton messages shall originate.
This is primarily useful for testing purposes, but might have other
uses.
Nowadays people use systemd on many different architectures, so we
shouldn't presuppose that they are using amd64. debootstrap defaults
to the native architecture and this should be good enough.
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.
In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
Follow-up to @poettering’s comments in #7723:
- Slightly expand on the difference between using tmpfiles.d and service
directives
- Mention CacheDirectory=
- Mention LogsDirectory=
- Abbreviate and unify some later descriptions
ConfigDirectory= is not mentioned, since it does not support the
functionality mentioned in the manpage which tmpfiles.d provides:
copying or symlinking default configuration from /usr/share/factory. And
the user package variable file locations don’t mention the directives
because in user units the service can always create the directories
itself (whereas in system units lesser-privileged services lack
permission to create them).
The config example contains wrong specificator for hostname.
It should be %H instead of %h as documented in the man page.
Use correct specificator for hostname.
Old text:
> Note that the User= and
> Group= options are not particularly useful for mount units specifying a
> "Type=" option or using configuration not specified in /etc/fstab;
> mount(8) will refuse options that are not listed in /etc/fstab if it is
> not run as UID 0.
However I recently learnt the following:
> The mount program does not read the /etc/fstab file if both device
> and dir are specified.
Therefore, if both device and dir are specified, the `user` or `users`
options in `fstab` will not have any effect. Run as a normal user,
you will always see
mount: only root can do that
Fix the explanation in the man page.
Also make sure to markup User= and Group= with <varname>.
Up until now, the behaviour in systemd has (mostly) been to silently
ignore failures to action unit directives that refer to an unavailble
controller. The addition of AssertControlGroupController and its
conditional counterpart allow explicit specification of the desired
behaviour when such a situation occurs.
As for how this can happen, it is possible that a particular controller
is not available in the cgroup hierarchy. One possible reason for this
is that, in the running kernel, the controller simply doesn't exist --
for example, the CPU controller in cgroup v2 has only recently been
merged and was out of tree until then. Another possibility is that the
controller exists, but has been forcibly disabled by `cgroup_disable=`
on the kernel command line.
In future this will also support whatever comes out of issue #7624,
`DefaultXAccounting=never`, or similar.
Systemd services are permitted to be scripts, as well as binary
executables.
The same also applies to the underlying /sbin/mount and /sbin/swapon.
It is not necessary for the user to consider what type of program file
these are. Nor is it necessary with systemd-nspawn, to distinguish between
init as a "binary" v.s. a user-specified "program".
Also fix a couple of grammar nits in the modified sentences.
The kernel needs two numbers, but for the user it's most convenient to provide the
user name and have that resolved to uid and gid.
Right now the primary group of the specified user is always used. That's the most
common case anyway. In the future we can extend the --owner option to allow a group
after a colon.
[I added this before realizing that this will not be enough to be used for user
runtime directory. But this seems useful on its own, so I'm keeping this commit.]
They may be old (or rather compatible implementations of old commands), but
they certainly are not going away. Apart from privilege escalation through
polkit, they are mostly equivalent.
This is useful to debug things, but also to hook up external post-up
scripts with resolved.
Eventually this code might be useful to implement a
resolvconf(8)-compatible interface for compatibility purposes. Since the
semantics don't map entirely cleanly as first step we add a native
interface for pushing DNS configuration into resolved, that exposes the
correct semantics, before adding any compatibility interface.
See: #7202
With Type=notify services, EXTEND_TIMEOUT_USEC= messages will delay any startup/
runtime/shutdown timeouts.
A service that hasn't timed out, i.e, start time < TimeStartSec,
runtime < RuntimeMaxSec and stop time < TimeoutStopSec, may by sending
EXTEND_TIMEOUT_USEC=, allow the service to continue beyond the limit for
the execution phase (i.e TimeStartSec, RunTimeMaxSec and TimeoutStopSec).
EXTEND_TIMEOUT_USEC= must continue to be sent (in the same way as
WATCHDOG=1) within the time interval specified to continue to reprevent
the timeout from occuring.
Watchdog timeouts are also extended if a EXTEND_TIMEOUT_USEC is greater
than the remaining time on the watchdog counter.
Fixes#5868.