IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When there are a lot of split out journal files, we might run out of fds
quicker then we want. Hence: bump RLIMIT_NOFILE to 16K if possible.
Do these even for journalctl. On Fedora the soft RLIMIT_NOFILE is at 1K,
the hard at 4K by default for normal user processes, this code hence
bumps this up for users to 4K.
https://bugzilla.redhat.com/show_bug.cgi?id=1179980
Making use of the fd storage capability of the previous commit, allow
restarting journald by serilizing stream state to /run, and pushing open
fds to PID 1.
- Unescape instance name so that we can take almost anything as instance
name.
- Introduce "machines.target" which consists of all enabled nspawns and
can be used to start/stop them altogether
- Look for container directory using -M instead of harcoding the path in
/var/lib/container
This adds a new bus call to machined that enumerates /var/lib/container
and returns all trees stored in it, distuingishing three types:
- GPT disk images, which are files suffixed with ".gpt"
- directory trees
- btrfs subvolumes
This pulls out the hwdb managment from udevadm into an independent tool.
The old code is left in place for backwards compatibility, and easy of
testing, but all documentation is dropped to encourage use of the new
tool instead.
Otherwise this actually remains in the generated unit in /usr/lib.
If you want to keep it commented out, a m4-compatible way would be:
m4_ifdef(`HAVE_SMACK',
dnl Capabilities=cap_mac_admin=i
dnl SecureBits=keep-caps
)
When dbus client connects to systemd-bus-proxyd through
Unix domain socket proxy takes client's smack label and sets for itself.
It is done before and independent of dropping privileges.
The reason of such soluton is fact that tests of access rights
performed by lsm may take place inside kernel, not only
in userspace of recipient of message.
The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label.
In case of systemd running in system mode, CAP_MAC_ADMIN
should be added to CapabilityBoundingSet in service file of bus-proxyd.
In case of systemd running in user mode ('systemd --user')
it can be achieved by addition
Capabilities=cap_mac_admin=i and SecureBits=keep-caps
to user@.service file
and setting cap_mac_admin+ei on bus-proxyd binary.
The unit file only active the machine-id-commit helper if /etc is mounted
writable and /etc/machine-id is an independant mount point (should be a tmpfs).
--link-journal={host,guest} fail if the host does not have persistent
journalling enabled and /var/log/journal/ does not exist. Even worse, as there
is no stdout/err any more, there is no error message to point that out.
Introduce two new modes "try-host" and "try-guest" which don't fail in this
case, and instead just silently skip the guest journal setup.
Change -j to mean "try-guest" instead of "guest", and fix the wrong --help
output for it (it said "host" before).
Change systemd-nspawn@.service.in to use "try-guest" so that this unit works
with both persistent and non-persistent journals on the host without failing.
https://bugs.debian.org/770275
This reverts commit a4962513c5.
logind.service is a D-Bus service, hence we should use the dbus name as
indication that we are up. Type=dbus is implied if BusName= is
specified, as it is in this case.
This removes a warning that is printed because a BusName= is specified
for a Type=notify unit.
The code already calls sd_notify("READY=1"), so we may as well take
advantage of the startup behavior in the unit. The same was done for
the journal in a87a38c20.
kdbus has seen a larger update than expected lately, most notably with
kdbusfs, a file system to expose the kdbus control files:
* Each time a file system of this type is mounted, a new kdbus
domain is created.
* The layout inside each mount point is the same as before, except
that domains are not hierarchically nested anymore.
* Domains are therefore also unnamed now.
* Unmounting a kdbusfs will automatically also detroy the
associated domain.
* Hence, the action of creating a kdbus domain is now as
privileged as mounting a filesystem.
* This way, we can get around creating dev nodes for everything,
which is last but not least something that is not limited by
20-bit minor numbers.
The kdbus specific bits in nspawn have all been dropped now, as nspawn
can rely on the container OS to set up its own kdbus domain, simply by
mounting a new instance.
A new set of mounts has been added to mount things *after* the kernel
modules have been loaded. For now, only kdbus is in this set, which is
invoked with mount_setup_late().
It seems that there actually aren't any long running tasks which are
performed at shutdown. If it turns out that there actually are, this
should be revisited.
This reverts most of commit 038193efa6.
For boot, we might kill fsck in the middle, with likely catastrophic
consequences.
On shutdown there might be other jobs, like downloading of updates for
installation, and other custom jobs. It seems better to schedule an
individual timeout on each one separately, when it is known what
timeout is useful.
Disable the timeouts for now, until we have a clearer picture of how
we can deal with long-running jobs.
For priviliged units this resource control property ensures that the
processes have all controllers systemd manages enabled.
For unpriviliged services (those with User= set) this ensures that
access rights to the service cgroup is granted to the user in question,
to create further subgroups. Note that this only applies to the
name=systemd hierarchy though, as access to other controllers is not
safe for unpriviliged processes.
Delegate=yes should be set for container scopes where a systemd instance
inside the container shall manage the hierarchies below its own cgroup
and have access to all controllers.
Delegate=yes should also be set for user@.service, so that systemd
--user can run, controlling its own cgroup tree.
This commit changes machined, systemd-nspawn@.service and user@.service
to set this boolean, in order to ensure that container management will
just work, and the user systemd instance can run fine.
Otherwise we could attempt to flush the journal while /var/log/ was
still ro, and silently skip journal flushing.
The way that errors in flushing are handled should still be changed to
be more transparent and robust.
Since commit 19f8d03783 'timer: order OnCalendar units after
timer-sync.target if DefaultDependencies=no' timers might get a
dependency on time-sync.target, which does not really belong in early
boot. If ntp is enabled, time-sync.target might be delayed until a
network connection is established.
It turns out that majority of timer units found in the wild do not
need to be started in early boot. Out of the timer units available in
Fedora 21, only systemd-readahead-done.timer and mdadm-last-resort@.timer
should be started early, but they both have DefaultDependencies=no,
so are not part of timers.target anyway. All the rest look like they
will be fine with being started a bit later (and the majority even
much later, since they run daily or weekly).
Let timers.target be pulled in by basic.target, but without the
temporal dependency. This means timer units are started on a "best
effort" schedule.
https://bugzilla.redhat.com/show_bug.cgi?id=1158206
In some cases it is preferable to ship system images with a pre-generated
binary hwdb database, to avoid having to build it at runtime, avoid shipping
the source hwdb files, or avoid storing large binary files in /etc.
So if hwdb.bin does not exist in /etc/udev/, fall back to looking for it in
UDEVLIBEXECDIR. This keeps the possibility to add files to /etc/udev/hwdb.d/
and re-generating the database which trumps the one in /usr/lib.
Add a new --usr flag to "udevadm hwdb --update" which puts the database
into UDEVLIBEXECDIR.
Adjust systemd-udev-hwdb-update.service to not generate the file in /etc if we
already have it in /usr.
Using the new JobTimeoutAction= setting make sure we power off the
machine after basic.target is queued for longer than 15min but not
executed. Similar, if poweroff.target is queued for longer than 30min
but does not complete, forcibly turn off the system. Similar, if
reboot.target is queued for longer than 30min but does not complete,
forcibly reboot the system.
This new command will ask the journal daemon to flush all log data
stored in /run to /var, and wait for it to complete. This is useful, so
that in case of Storage=persistent we can order systemd-tmpfiles-setup
afterwards, to ensure any possibly newly created directory in /var/log
gets proper access mode and owners.
systemd-journald check the cgroup id to support rate limit option for
every messages. so journald should be available to access cgroup node in
each process send messages to journald.
In system using SMACK, cgroup node in proc is assigned execute label
as each process's execute label.
so if journald don't want to denied for every process, journald
should have all of access rule for all process's label.
It's too heavy. so we could give special smack label for journald te get
all accesses's permission.
'^' label.
When assign '^' execute smack label to systemd-journald,
systemd-journald need to add CAP_MAC_OVERRIDE capability to get that smack privilege.
so I want to notice this information and set default capability to
journald whether system use SMACK or not.
because that capability affect to only smack enabled kernel
They were left from an early review iteration, when hibernate-resume
functionality was intended to work also outside of initramfs.
Now this is not the case, and these dependencies became redundant
as systemd-fsck-root.service can never be part of initramfs, and
systemd-remount-fs.service makes little sense in it.
This way we are sure that /dev/net/tun has been given the right permissions before we try to connect to it.
Ideally, we should create tun/tap devices over netlink, and then this whole issue would go away.
It seems the return code of systemctl daemon-reload can be !=0 in some
circumstances, which causes a failure of the unit and breaks booting in
the initrd.
This can be used to initiate a resume from hibernation by path to a swap
device containing the hibernation image.
The respective templated unit is also added. It is instantiated using
path to the desired resume device.
With this change, it becomes possible to order a unit to activate before any
modifications to the file systems. This is especially useful for supporting
resume from hibernation.
For pluggable ttys such as USB serial devices, the getty is restarted
and exits in a loop until the remove event reaches systemd. Under
certain circumstances the restart loop can overload the system in a
way that prevents the remove event from reaching systemd for a long
time (e.g. at least several minutes on a small embedded system).
Use the default RestartSec to prevent the restart loop from
overloading the system. Serial gettys are interactive units, so
waiting an extra 100ms really doesn't make a difference anyways
compared to the time it takes the user to log in.
Currently after exiting rescue shell we isolate default target. User
might want to isolate to some other target than default one. However
issuing systemctl isolate command to desired target would bring system
to default target as a consequence of running ExecStopPost action.
Having common ancestor for rescue shell and possible followup systemctl
default command should fix this. If user exits rescue shell we will
proceed with isolating default target, otherwise, on manual isolate,
parent shell process is terminated and we don't isolate default target,
but target chosen by user.
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer
way to hook in systemd-firstboot.service on first boots (those with /etc
unpopulated), so let's do this, and get rid of the generator again.
A new tool "systemd-firstboot" can be used either interactively on boot,
where it will query basic locale, timezone, hostname, root password
information and set it. Or it can be used non-interactively from the
command line when prepareing disk images for booting. When used
non-inertactively the tool can either copy settings from the host, or
take settings on the command line.
$ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi
The tool will be automatically invoked (interactively) now on first boot
if /etc is found unpopulated.
This also creates the infrastructure for generators to be notified via
an environment variable whether they are running on the first boot, or
not.
We really don't want these in containers as they provide a too lowlevel
look on the system.
Conditionalize them with CAP_SYS_RAWIO since that's required to access
/proc/kcore, /dev/kmem and similar, which feel similar in style. Also,
npsawn containers lack that capability.
npsawn containers generally have CAP_MKNOD, since this is required
to make PrviateDevices= work. Thus, it's not useful anymore to
conditionalize the kmod static device node units.
Use CAP_SYS_MODULES instead which is not available for nspawn
containers. However, the static device node logic is only done for being
able to autoload modules with it, and if we can't do that there's no
point in doing it.
Reported by Gerardo Exequiel Pozzi:
Looks like [commit a4a878d0] also changes a unrelated file
(units/local-fs.target) [partially]reverting the commit
40f862e3 (filesystem targets: disable default dependencies)
The side effect, at least in my case is that the "nofail" option in both
"crypttab" and "fstab" has partial effect does the default timeout
instead of continue normal boot without timeout.
In a normal running system, non-passive targets and units used during
early bootup are always started. So refusing "manual start" for them
doesn't make any difference, because a "start" command doesn't cause
any action.
In early boot however, the administrator might want to start on
of those targets or services by hand. We shouldn't interfere with that.
Note: in case of systemd-tmpfiles-setup.service, really running the
unit after system is up would break the system. So e.g. restarting
should not be allowed. The unit has "RefuseManualStop=yes", which
prevents restart too.
networkd-wait-online should never exist in the default transaction,
unless explicitly enable or pulled in via things like NFS. However, just
enabling networkd shouldn't enable networkd-wait-online, since it's
common to use the former without the latter.
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
The only update service we really need to guard like this is
systemd-tmpfiles-setup.service since if invoked manually might create
/var/run/nologin and thus blocking the user from login. The other
services are pretty much idempotent and don't suffer by this problem,
hence let's simplify them.
With this in place RPMs can make sure that whatever they drop in is
immeidately applied, and not delayed until next reboot.
This also moves systemd-sysusers back to /usr/bin, since hardcoding the
path to /usr/lib in the macros would mean compatibility breaks in
future, should we turn sysusers into a command that is actually OK for
people to call directly. And given that that is quite likely to happen
(since it is useful to prepare images with its --root= switch), let's
just prepare for it.
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
[Unit]
ConditionNeedsUpdate=/etc
Before=systemd-update-done.service
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
In order to support offline updates to /usr, we need to be able to run
certain tasks on next boot-up to bring /etc and /var in line with the
updated /usr. Hence, let's devise a mechanism how we can detect whether
/etc or /var are not up-to-date with /usr anymore: we keep "touch
files" in /etc/.updated and /var/.updated that are mtime-compared with
/usr. This means:
Whenever the vendor OS tree in /usr is updated, and any services that
shall be executed at next boot shall be triggered, it is sufficient to
update the mtime of /usr itself. At next boot, if /etc/.updated and/or
/var/.updated is older than than /usr (or missing), we know we have to
run the update tools once. After that is completed we need to update the
mtime of these files to the one of /usr, to keep track that we made the
necessary updates, and won't repeat them on next reboot.
A subsequent commit adds a new ConditionNeedsUpdate= condition that
allows checking on boot whether /etc or /var are outdated and need
updating.
This is an early step to allow booting up with an empty /etc, with
automatic rebuilding of the necessary cache files or user databases
therein, as well as supporting later updates of /usr that then propagate
to /etc and /var again.
We install two sysctl snippets ourselves, hence the condition will
always trigger, so no point in tryng to optimize things with this, it
just will make things slower, if anything.
There's no point in conditionalizing systemd-tmpfiles at boot, since we
ship tmpfiles snippets ourselves, hence they will always trigger anyway.
Also, there's no reason to pull in local-fs.target from the service,
hence drop that.
There might be implementations around where the network-online logic
might not talk to any network configuration service (and thus not have
to wait for it), hence let's explicitly order network-online.target
after network.target to avoid any ambiguities.
network-pre.target is a passive target that should be pulled in by
services that want to be executed before any network is configured (for
example: firewall scrips).
network-pre.target should be ordered before all network managemet
services (but not be pulled in by them).
network-pre.target should be order after all services that want to be
executed before any network is configured (and be pulled in by them).
