IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Allows configuring the watchdog signal (with a default of SIGABRT).
This allows an alternative to SIGABRT when coredumps are not desirable.
Appropriate references to SIGABRT or aborting were renamed to reflect
more liberal watchdog signals.
Closes#8658
We have "installed tests", but don't provide an easy way to run them.
The protocol is very simple: each test must return 0 for success, 77 means
"skipped", anything else is an error. In addition, we want to print test
output only if the test failed.
I wrote this simple script. It is pretty basic, but implements the functions
listed above. Since it is written in python it should be easy to add option
parsing (like running only specific tests, or running unsafe tests, etc.)
I looked at the following alternatives:
- Ubuntu root-unittests: this works, but just dumps all output to the terminal,
has no coloring.
- @ssahani's test runner [2]
It uses the unittest library and the test suite was implented as a class, and
doesn't implement any of the functions listed above.
- cram [3,4]
cram runs our tests, but does not understand the "ignore the output" part,
has not support for our magic skip code (it uses hardcoded 80 instead),
and seems dead upstream.
- meson test
Here the idea would be to provide an almost-empty meson.build file under
/usr/lib/systemd/tests/ that would just define all the tests. This would
allow us to reuse the test runner we use normally. Unfortunately meson requires
a build directory and configuration to be done before running tests. This
would be possible, but seems a lot of effort to just run a few binaries.
[1] 242c96addb/debian/tests/root-unittests
[2] https://github.com/systemd/systemd-fedora-ci/blob/master/upstream/systemd-upstream-tests.py
[3] https://bitheap.org/cram/
[4] https://pypi.org/project/pytest-cram/Fixes#10069.
When parsing and installing binaries mentioned in Exec*= lines the
5ed0dcf4d5 commit added parsing logic to drop
prefixes, including handling duplicate exclamation marks. But this did not
handle arbitrary combination of multiple prefixes, ie. StartExec=+-/bin/sh was
parsed as -/bin/sh which then would fail to install.
Instead of using egrep and shell replacements, replace both with sed command
that does it all. This sed script extract a group of characters starting with a
/ up to the first space (if any) after the equals sign. This correctly handles
existing non-prefixed, prefixed, multiple-prefixed commands.
About half commands seem to repeat themself, thus sort -u cuts the list of
binaries to install about in half.
To validate change of behaviour both old and new functions were modified to
echo parsed binaries into separate files, and then diffed. The incorrect
-/bin/sh was missing in the new output.
Without this patch tests fail on default Ubuntu installs.
Back in 08318a2c5a, value "false" was enabled for
'-Dtests=', but various tests were not conditionalized properly. So even with
-Dtests=false -Dslow-tests=false we'd run 120 tests. Let's make this consistent.
... when no mount options are passed.
Change the code, to avoid the following failure in the newly added tests:
exec-temporaryfilesystem-rw.service: Executing: /usr/bin/sh -x -c
'[ "$(stat -c %a /var)" == 755 ]'
++ stat -c %a /var
+ '[' 1777 == 755 ']'
Received SIGCHLD from PID 30364 (sh).
Child 30364 (sh) died (code=exited, status=1/FAILURE)
(And I spotted an opportunity to use TAKE_PTR() at the end).
We can't remount the underlying superblocks, if we are inside a user
namespace and running Linux <= 4.17. We can only change the per-mount
flags (MS_REMOUNT | MS_BIND).
This type of mount() call can only change the per-mount flags, so we
don't have to worry about passing the right string options now.
Fixes#9914 ("Since 1beab8b was merged, systemd has been failing to start
systemd-resolved inside unprivileged containers" ... "Failed to re-mount
'/run/systemd/unit-root/dev' read-only: Operation not permitted").
> It's basically my fault :-). I pointed out we could remount read-only
> without MS_BIND when reviewing the PR that added TemporaryFilesystem=,
> and poettering suggested to change PrivateDevices= at the same time.
> I think it's safe to change back, and I don't expect anyone will notice
> a difference in behaviour.
>
> It just surprised me to realize that
> `TemporaryFilesystem=/tmp:size=10M,ro,nosuid` would not apply `ro` to the
> superblock (underlying filesystem), like mount -osize=10M,ro,nosuid does.
> Maybe a comment could note the kernel version (v4.18), that lets you
> remount without MS_BIND inside a user namespace.
This makes the code longer and I guess this function is still ugly, sorry.
One obstacle to cleaning it up is the interaction between
`PrivateDevices=yes` and `ReadOnlyPaths=/dev`. I've added a test for the
existing behaviour, which I think is now the correct behaviour.
A follow-up for commit 9d874aec45.
This patch makes "path" parameter mandatory in fd_set_*() helpers removing the
need to use fd_get_path() when NULL was passed. The caller is supposed to pass
the fd anyway so assuming that it also knows the path should be safe.
Actually, the only case where this was useful (or used) was when we were
walking through directory trees (in item_do()). But even in those cases the
paths could be constructed trivially, which is still better than relying on
fd_get_path() (which is an ugly API).
A very succinct test case is also added for 'z/Z' operators so the code dealing
with recursive operators is tested minimally.
The usage of an initrd made TEST-09-ISSUE-2691 more likely to fail with
a timeout, so increase the timeout by 90s and adjust TimeoutStopSec=
accordingly.
Not all distros support booting without an initrd. E.g. the Debian
kernel builds ext4 as a module and so relies on an initrd to
successfully start the QEMU-based images.
Mount tmpfses over the networkd and resolved config and state
directories, and stop the services beforehand. This ensures that the
test does not mess with an existing networkd/resolved setup. At least
for ethernet setups, this does not sever existing links, so is good
enough for the CI cases we are interested in (QEMU and LXC).
Relax the skip check to only skip the test when trying to run this on
real iron, but start running it in virtual machines now.
This allows us to run the test on Ubuntu 18.04 LTS in CI, which uses
both services by default.
Like s-networkd.service itself, it can happen that s-resolved.service
runs into restart limits. Don't enforce a successful call, as on
machines without resolved the unit might not be loaded.
- Reset systemd-networkd.service before each test run, to avoid running
into restart limits.
- Our networkd-test-router.service unit needs to run as root and thus
can't use `User=`; but networkd still insists on the
`systemd-network` system user to exist, so create it.
oss-fuzz flags this as:
==1==WARNING: MemorySanitizer: use-of-uninitialized-value
0. 0x7fce77519ca5 in ascii_is_valid systemd/src/basic/utf8.c:252:9
1. 0x7fce774d203c in ellipsize_mem systemd/src/basic/string-util.c:544:13
2. 0x7fce7730a299 in print_multiline systemd/src/shared/logs-show.c:244:37
3. 0x7fce772ffdf3 in output_short systemd/src/shared/logs-show.c:495:25
4. 0x7fce772f5a27 in show_journal_entry systemd/src/shared/logs-show.c:1077:15
5. 0x7fce772f66ad in show_journal systemd/src/shared/logs-show.c:1164:29
6. 0x4a2fa0 in LLVMFuzzerTestOneInput systemd/src/fuzz/fuzz-journal-remote.c:64:21
...
I didn't reproduce the issue, but this looks like an obvious error: the length
is specified, so we shouldn't use the string with any functions for normal
C-strings.
The test is heavily dependent on timeouts, and if we are run in
potentially very slow QEMU instances there's a good chance we'll miss
some which we normally wouldn't miss. Hence, let's test this one in
nspawn only. Given that the test is purely in service management it
shouldn't matter whether it runs in nspawn or qemu, hence keep running
it in nspawn, but don't bother with qemu.
Similar, do this for TEST-03-JOBS, too, which operates with relatively
short sleep times internally.
Fixes: #9123
As it turns out /usr/share/selinux/devel/ is now included in more RPMs
than just selinux-policy-devel (specifically container-selinux, which is
pulled in by various container related RPMs). Let's hence tighten the
dependency check a bit and look for systemd's .if file, which is what we
actually care about.
First, ellipsize() and ellipsize_mem() should not read past the input
buffer. Those functions take an explicit length for the input data, so they
should not assume that the buffer is terminated by a nul.
Second, ellipsization was off in various cases where wide on multi-byte
characters were used.
We had some basic test for ellipsize(), but apparently it wasn't enough to
catch more serious cases.
Should fix https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8686.
journalctl -o short would display those entries, but journalctl -o short-full
would refuse. If the entry is bad, just fall back to the receive-side realtime
timestamp like we would if it was completely missing.
We'd look for a '=' separator using memchr, i.e. ignoring any nul bytes in the
string, but then do a strndup, which would terminate on any nul byte, and then
again do a memcmp, which would access memory past the chunk allocated by strndup.
Of course, we probably shouldn't allow keys with nul bytes in them. But we
currently do, so there might be journal files like that out there. So let's fix
the journal-reading code first.
Something is wrong with the entry (probably a missing timestamp), so no point
in rotating. But suppress the error in process_source(), so that the processing
of the data stream continues.
Also, just return 0 from writer_write() on success, the only caller doesn't
care.
This corresponds nicely with the specifiers we already pass for
/var/lib, /var/cache, /run and so on.
This is particular useful to update the test-path service files to
operate without guessable files, thus allowing multiple parallel
test-path invocations to pass without issues (the idea is to set $TMPDIR
early on in the test to some private directory, and then only use the
new %T or %V specifier to refer to it).
Test the "[Bridge]" section keys
```
[Bridge]
UnicastFlood=true
HairPin=true
UseBPDU=true
FastLeave=true
AllowPortToBeRoot=true
Cost=555
Priority=23
```
```
test_bridge_init (__main__.BridgeTest) ... ok
test_bridge_port_priority (__main__.BridgeTest) ... ok
test_bridge_port_priority_set_zero (__main__.BridgeTest)
It should be possible to set the bridge port priority to 0 ... ok
test_bridge_port_property (__main__.BridgeTest)
Test the "[Bridge]" section keys ... ok
```
Yes, the output is sometimes annyoing, but /dev/null is not the right
place...
I figure this redirection was left in from some debugging session, let's
fix it, and make the setup_basic_environment invocation like in all
other test scripts.
Nested KVM is very flaky as we learnt from our CI. Hence, let's avoid
KVM whenever we detect we are already running inside of KVM.
Maybe one day nested KVM is fixed, at which point we can turn this on
again, but for now let's simply avoid nested KVM, since reliable CI is
more important than quick CI, I guess.
And yes, avoiding KVM for our qemu runs does make things substantially
slower, but I think it's not a complete loss.
Inspired by @evverx' findings in:
https://github.com/systemd/systemd/pull/8701#issuecomment-380213302
To indicate that the there're no more entries, these wrappers return false but
did leave the passed pointed unmodified.
However EOF is not an error and is a very common case so initialize the output
argument to NULL even in this case so callers don't need to do that.
Fixes: #8721
We go through the whole file system, so this test can take arbitrary time. But
this test is still quite useful, so let's at least try to make it more efficent
by not descending at all into the directories we would filter out later on
anyway.
Also increase the timeout, in case the previous step doesn't help enough.
Absolute paths make everything simple and quick, but sometimes this requirement
can be annoying. A good example is calling 'test', which will be located in
/usr/bin/ or /bin depending on the distro. The need the provide the full path
makes it harder a portable unit file in such cases.
This patch uses a fixed search path (DEFAULT_PATH which was already used as the
default value of $PATH), and if a non-absolute file name is found, it is
immediately resolved to a full path using this search path when the unit is
loaded. After that, everything behaves as if an absolute path was specified. In
particular, the executable must exist when the unit is loaded.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This makes the script wait for the newly created partition to
show up before trying to put a filesystem on it, which should
prevent the tests from failing with the following error:
```
New situation:
Disklabel type: dos
Disk identifier: 0x3541a0ec
Device Boot Start End Sectors Size Id Type
/dev/loop6p1 2048 800767 798720 390M 83 Linux
/dev/loop6p2 800768 819199 18432 9M 83 Linux
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
The file /dev/loop6p1 does not exist and no size was specified.
make: *** [setup] Error 1
F: Failed to mkfs -t ext4
Makefile:4: recipe for target 'setup' failed
```
ubsan times out because we do too many allocations:
$ valgrind build/fuzz-unit-file test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full
...
test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full... ok
==1757==
==1757== HEAP SUMMARY:
==1757== in use at exit: 0 bytes in 0 blocks
==1757== total heap usage: 199,997 allocs, 199,997 frees, 90,045,318,585 bytes allocated
...
==3256== total heap usage: 100,120 allocs, 100,120 frees, 13,097,140 bytes allocated
https://oss-fuzz.com/v2/issue/4651449704251392/6977 should now be really fixed.
e3c3d6761b was the first attempt, but even with this change, e3c3d6761b
still makes sense.
With this "sudo ./run-integration-tests.sh" should work fully without
exception, even on systems lacking SELinux (in which case that test will
just be skipped)
It's always visible:
$ sudo modprobe sit
$ sudo unshare -n ip l
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
grep already indicates if it matched anything by return value.
Additional advantage is then that if the test fails, the unexpected
matching lines are visible in the log output.
No need to go through the specifier_printf() if the path is already too long in
the unexpanded form (since specifiers increase the length of the string in all
practical cases).
In the oss-fuzz test case, valgrind reports:
total heap usage: 179,044 allocs, 179,044 frees, 72,687,755,703 bytes allocated
and the original config file is ~500kb. This isn't really a security issue,
since the config file has to be trusted any way, but just a matter of
preventing accidental resource exhaustion.
https://oss-fuzz.com/v2/issue/4651449704251392/6977
While at it, fix order of arguments in the neighbouring log_syntax() call.
msan doesn't understand sscanf with %ms, so it falsely reports unitialized
memory. Using sscanf with %ms is quite convenient in
socket_address_parse_netlink(), so let's just not run the fuzzer for
ListenNetlink= at all for now. If msan is fixed, we can remove this.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6884
