IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
We have a common parser, but for the user it might be
completely unobvious that the same general rules apply
to all those files. Let's add a page about the basic syntax
so that the more specific pages don't have to repeat those
details.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This adds a new setting LineMax= to journald.conf, and sets it by
default to 48K. When we convert stream-based stdout/stderr logging into
record-based log entries, read up to the specified amount of bytes
before forcing a line-break.
This also makes three related changes:
- When a NUL byte is read we'll not recognize this as alternative line
break, instead of silently dropping everything after it. (see #4863)
- The reason for a line-break is now encoded in the log record, if it
wasn't a plain newline. Specifically, we distuingish "nul",
"line-max" and "eof", for line breaks due to NUL byte, due to the
maximum line length as configured with LineMax= or due to end of
stream. This data is stored in the new implicit _LINE_BREAK= field.
It's not synthesized for plain \n line breaks.
- A randomized 128bit ID is assigned to each log stream.
With these three changes in place it's (mostly) possible to reconstruct
the original byte streams from log data, as (most) of the context of
the conversion from the byte stream to log records is saved now. (So,
the only bits we still drop are empty lines. Which might be something to
look into in a future change, and which is outside of the scope of this
work)
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=86465
See: #4863
Replaces: #4875
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
This makes journald use the common option parsing functionality.
One behavioural change is implemented:
"systemd.journald.forward_to_syslog" is now equivalent to
"systemd.journald.forward_to_syslog=1".
I think it's nicer to use this way.
In this mode, messages from processes which are not part of the session
land in the main journal file, and only output of processes which are
properly part of the session land in the user's journal. This is
confusing, in particular because systemd-coredump runs outside of the
login session.
"Deprecate" SplitMode=login by removing it from documentation, to
discourage people from using it.
We generally follow the rule that for time settings we suffix the setting name
with "Sec" to indicate the default unit if none is specified. The only
exception was the rate limiting interval settings. Fix this, and keep the old
names for compatibility.
Do the same for journald's RateLimitInterval= setting
Implement a maximum limit on number of journal files to keep around.
Enforcing a limit is useful on this since our performance when viewing
pays a heavy penalty for each journal file to interleve. This setting is
turned on now by default, and set to 100.
Also, actully implement what 348ced9097
promised: use whatever we find on disk at startup as lower bound on how
much disk space we can use. That commit introduced some provisions to
implement this, but actually never did.
This also adds "journalctl --vacuum-files=" to vacuum files on disk by
their number explicitly.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
In man journald.conf, removes reference to XZ as sole form of
compression. See commit d89c8fdf48.
In man coredump.conf, clarifies that "Compression=" controls existence,
not type, of compression.
Now that we actually can distuingish system and normal users there's no
point in taking session information into account anymore when splitting
up logs.
This has the beenfit with that coredump information will actually end up
in each user's own journal.
This will let journald forward logs as messages sent to all logged in
users (like wall).
Two options are added:
* ForwardToWall (default yes)
* MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.
This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
Before, journald would remove journal files until both MaxUse= and
KeepFree= settings would be satisfied. The first one depends (if set
automatically) on the size of the file system and is constant. But
the second one depends on current use of the file system, and a spike
in disk usage would cause journald to delete journal files, trying to
reach usage which would leave 15% of the disk free. This behaviour is
surprising for the user who doesn't expect his logs to be purged when
disk usage goes above 85%, which on a large disk could be some
gigabytes from being full. In addition attempting to keep 15% free
provides an attack vector where filling the disk sufficiently disposes
of almost all logs.
Instead, obey KeepFree= only as a limit on adding additional files.
When replacing old files with new, ignore KeepFree=. This means that
if journal disk usage reached some high point that at some later point
start to violate the KeepFree= constraint, journald will not add files
to go above this point, but it will stay (slightly) below it. When
journald is restarted, it forgets the previous maximum usage value,
and sets the limit based on the current usage, so if disk remains to
be filled, journald might use one journal-file-size less on each
restart, if restarts happen just after rotation. This seems like a
reasonable compromise between implementation complexity and robustness.
Reporting of the free space was bogus, since the remaining space
was compared with the maximum allowed, instead of the current
use being compared with the maximum allowed. Simplify and fix
by reporting limits directly at the point where they are calculated.
Also, assign a UUID to the message.
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
