1
0
mirror of https://github.com/systemd/systemd.git synced 2024-12-22 17:35:35 +03:00
Commit Graph

2639 Commits

Author SHA1 Message Date
Yu Watanabe
6dcc087cb6 test-network: add testcases for address property change
This adds a testcase for issue #22515.
2022-02-24 07:37:50 +09:00
Frantisek Sumsal
80ff956704
Merge pull request #22591 from evverx/no-deps
ci: build systemd without optional dependencies
2022-02-23 09:27:41 +00:00
Evgeny Vereshchagin
fb53316fde meson: pass skip-deps on to the fuzzers as well
they should be tested without optional dependecines as well. CIFuzz
kind of covers that but let's just make sure local builds are fine as
well.
2022-02-22 17:50:14 +00:00
Luca Boccassi
aff3a9e1fa watchdog: add setting to configure pretimeout governor 2022-02-22 17:19:54 +00:00
Curtis Klein
5717062e93 watchdog: Add watchdog pretimeout support
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.

The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
2022-02-22 17:19:54 +00:00
Yu Watanabe
07b7337aff network: dhcp-pd: allow to assign the same subnet prefix to multiple interfaces
There is no reason networkd refuses that. Especially, when multiple
downstream interfaces are connected to the same network, it is natural to
assign the same subnet prefix to them.

Prompted by #22571.
2022-02-22 20:39:32 +09:00
Yu Watanabe
38488babe7 network: dhcp-pd: fix prefix length of address assigned to upstream interface
This effectively revert ab0c82d9f7.

I have no idea why I did that...

Fixes #22559.
2022-02-22 20:39:28 +09:00
Yu Watanabe
63b5e05ff9
Merge pull request #22545 from yuwata/network-match-kind
network, udev: introduce Kind= setting in [Match] section
2022-02-18 01:20:18 +09:00
Frantisek Sumsal
93c3b6989b test: set ReadWritePaths= only for units from TEST-20
as setting it system-wide has some undesirable side-effects.

Follow-up to b6fc524.
2022-02-17 14:45:21 +00:00
Yu Watanabe
65022cd7ab network,udev/net: add Kind= settings in [Match] section
This may be useful for writing .network or .link files matching with
virtual interfaces.

Closes #22541.
2022-02-17 23:10:26 +09:00
Yu Watanabe
cc46d3be68
Merge pull request #22502 from yuwata/udev-net-virtual-wlan-interface
network: add virtual wlan interface support
2022-02-16 23:03:52 +09:00
Yu Watanabe
e43a418f86
Merge pull request #22271 from keszybz/manager-reexec-freeze
Freeze manager if reexec fails
2022-02-16 23:02:21 +09:00
Zbigniew Jędrzejewski-Szmek
6b1fa53997 manager: add few ", ignoring" and adjust level in one message 2022-02-16 08:07:20 +01:00
Yu Watanabe
1147ce3a46
Merge pull request #22523 from DaanDeMeyer/systemd-networkd-tests-fixes
mkosi: Support running systemd-networkd-tests.py in QEMU
2022-02-16 16:04:14 +09:00
Evgeny Vereshchagin
bf6ef6b6a9 tests: allow running all the services with SYSTEMD_LOG_LEVEL
It should make it easier to figure out what exactly services do there.
For example, with SYSTEMD_LOG_LEVEL=debug userdbd (v249) prints
```
varlink-5: New incoming message: {"method":"io.systemd.UserDatabase.GetUserRecord","parameters":{}}
```
before it crashes and systemd-resolved prints
```
varlink-21: New incoming message: {"method":"io.systemd.Resolve.ResolveAddress","parameters":{"address":[127,0,0,1],"flags":0,"ifindex":1000000,"family":0}}
```
and those messages are helpful (especially when scripts causing them
aren't clever enough to keep track of random stuff they send to systemd
:-))
2022-02-16 07:50:51 +03:00
Daan De Meyer
1e86c83308 test: Prefix all network/netdev config files used by systemd-networkd-tests.py
Let's make sure these take preference over any generic network config files shipped
by the OS (in this case specifically, mkosi).
2022-02-15 22:53:43 +00:00
Daan De Meyer
e2bf0a72ea test: Skip test_macsec() until kernel panic is fixed 2022-02-15 22:53:40 +00:00
Daan De Meyer
0f1853e230 mkosi: Support running systemd-networkd-tests.py in QEMU
This commit adds the necessary packages for Fedora and Arch.
2022-02-15 22:11:39 +00:00
Daan De Meyer
0765763e51 test: Stop using TextTestRunner in systemd-networkd-tests.py
If we assign our own test runner, passing arguments stops working
as unittest won't instantiate its own test runner after it parses
the arguments from sys.argv.

Consequence is that the tests will write to stderr now instead of
stdout since it doesn't seem possible to configure the stream that
unittest.main() will instantiate its test runner with so it'll
default to sys.stderr.
2022-02-15 23:32:06 +09:00
Yu Watanabe
dedf2d0054 network: add support to create wlan virtual interface
Closes #18977.
2022-02-15 23:24:55 +09:00
Lennart Poettering
ec00453b1c
Merge pull request #22412 from yuwata/sd-dhcp6-client-cleanups
sd-dhcp6-client: several fixes and cleanups
2022-02-15 14:18:55 +01:00
Frantisek Sumsal
b6fc52408a test: set ReadWritePaths=$BUILD_DIR when running w/ coverage
otherwise units using `DynamicUser=yes` won't be able to write the
coverage stats (currently affecting TEST-20-MAINPIDGAMES).

`DynamicUser=yes` implies `ProtectSystem=strict` and
`ProtectHome=read-only` and can't be overridden hence we need to
utilize `ReadWritePaths=` to work around that.
2022-02-14 21:59:33 +00:00
Frantisek Sumsal
d282e57e2a test: check for (possibly) missing test coverage
If the test logs contain lines like:

```
...systemd-resolved[735885]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-250.a.p/base-filesystem.c.gcda:Cannot open
```

it means we're possibly missing some coverage since gcov can't write the stats,
usually due to the sandbox being too restrictive (e.g. ProtectSystem=yes,
ProtectHome=yes) or the $BUILD_DIR being inaccessible to non-root users.
2022-02-14 12:20:02 +01:00
Frantisek Sumsal
e4c822e9ac test: set ACLs for the build dir when built with coverage
Otherwise unprivileged processes (like systemd-resolved) can't write
coverage data.
2022-02-14 11:58:54 +01:00
Yu Watanabe
7b53d3ead3 fuzz-dhcp6-client: merge with fuzz-dhcp6-client-send 2022-02-14 15:02:33 +09:00
Frantisek Sumsal
4ba5594390 test: document how to manually run Ubuntu CI stuff
Every time I need it I have to first relearn autopkgtest and find where
all the necessary stuff lives, so let's document it somewhere close to
systemd for (at least) future me.
2022-02-10 13:53:10 +00:00
Frantisek Sumsal
b034f02c62 test: accept GC'ed units in newer LVM
Since lvm 2.03.15 the transient units are started without `-r`, thus
disappearing once they finish and breaking the test (which expects them
to remain loaded after finishing). Let's accept `LoadState=not-found` as
a valid result as well to fix this.

Follow-up to: d10d562bd4
See: https://sourceware.org/git/?p=lvm2.git;a=commit;h=fbd8b0cf43dc67f51f86f060dce748f446985855
2022-02-10 13:26:11 +00:00
Yu Watanabe
2d88df457a
Merge pull request #22471 from yuwata/network-bridge-vlan-protocol
network: bridge: fix vlan protocol
2022-02-10 20:40:04 +09:00
Yu Watanabe
ac7e18be76
Merge pull request #22452 from yuwata/network-ipv6ll
network: use sysctl to set IPv6LL address generation mode when the interface is already up
2022-02-10 20:38:56 +09:00
Yu Watanabe
b6d5dab7bb test-network: add missing tests for bridge properties 2022-02-10 18:04:34 +09:00
Yu Watanabe
2becdbccd1 test-network: add testcase for re-generating IPv6LL address 2022-02-10 17:35:48 +09:00
Alvin Šipraga
19ff06b3a4
udev/net: support Match.Firmware= in .link files (#22462)
In cbcdcaaa0e ("Add support for conditions on the machines firmware")
a new Firmware= directive was added for .netdev and .network files.
While it was also documented to work on .link files, in actual fact the
support was missing. Add that one extra line to make it work, and also
update the fuzzer directives.
2022-02-10 16:19:28 +09:00
Frantisek Sumsal
d10d562bd4 test: lvm 2.03.15 dropped the static autoactivation
so install the respective generator only if we're running with older
lvm versions.

See: https://sourceware.org/git/?p=lvm2.git;a=commit;h=ee8fb0310c53ed003a43b324c99cdfd891dd1a7c
2022-02-09 22:36:25 +01:00
Santa Wiryaman
97f27f8a16 Add support for isolated parameter
Add the "Isolated" parameter in the *.network file, e.g.,

[Bridge]
Isolated=true|false

When the Isolated parameter is true, traffic coming out of this port
will only be forward to other ports whose Isolated parameter is false.

When Isolated is not specified, the port uses the kernel default
setting (false).

The "Isolated" parameter was introduced in Linux 4.19.
See man bridge(8) for more details.
But even though the kernel and bridge/iproute2 recognize the "Isolated"
parameter, systemd-networkd did not have a way to set it.
2022-02-09 17:37:37 +09:00
Yu Watanabe
18f84f8aba udev/net: support to set MDI-X mode
Closes #22386.
2022-02-08 15:47:46 +00:00
Lennart Poettering
2cd341afb9 tests: add repart tests for block devices with 1024, 2048, 4096 byte sector sizes
let's make sure repart works with 4K drives and exotic sector sizes.
2022-02-08 10:52:05 +01:00
Luca Boccassi
75844b44ee
Merge pull request #22408 from mrc0mmand/test-network-cleanup
test-network: code cleanup
2022-02-03 22:50:38 +00:00
Anita Zhang
d83923bdb7
Merge pull request #22355 from yuwata/network-tunnel-external
network: tunnel: support external mode
2022-02-03 14:20:43 -08:00
Frantisek Sumsal
87bf983c55 test-network: disable irrelevant or one-time pylint checks 2022-02-03 19:31:15 +01:00
Frantisek Sumsal
54e2f32f50 test-network: use specific exceptions instead of the Exception class 2022-02-03 19:30:11 +01:00
Frantisek Sumsal
a561bceeaa test-network: avoid name clashing/redefinition 2022-02-03 19:20:42 +01:00
Frantisek Sumsal
524cc9d1d8 test-network: disable 'no-member' warning for the Utilities class
The warning is correct, since we don't inherit the necessary
unittest.TestCase class, but that's on purpose, since the Utilities
class is not supposed to be instantiated on its own, but should
complement other classes' definitions which do inherit from the
unittest.TestCase class.
2022-02-03 19:13:06 +01:00
Frantisek Sumsal
283863a116 test-network: use raw strings for regexes with backslashes
It currently works because `\(` and `\)` are not valid escape sequences,
so they're not treated differently. Using raw strings (or double
backslashes) is a more correct solution.
2022-02-03 18:55:12 +01:00
Frantisek Sumsal
535e8107ee test-network: explicitly set check=False for subprocess.run()
since we're checking the returned error code explicitly via the
`returncode` member.
2022-02-03 18:49:35 +01:00
Frantisek Sumsal
f7805a6c79 test-network: convert certain multiline strings to comments
Multiline comments are converted to docstrings only when they're the
first statement in a function/method. Even though they're still a no-op
otherwise, let's use "true" comments to make pylint happy.
2022-02-03 18:42:41 +01:00
Frantisek Sumsal
45dbd0b945 test-network: drop unused variables 2022-02-03 18:18:29 +01:00
Frantisek Sumsal
19aa7f99c7 test-network: drop unnecessary else statements 2022-02-03 18:18:29 +01:00
Frantisek Sumsal
6983bb0e5e test-network: drop unnecessary semicolons 2022-02-03 18:18:27 +01:00
Frantisek Sumsal
83bceef027 test-network: drop superfluous parens 2022-02-03 18:10:06 +01:00
Evgeny Vereshchagin
be496d6a9b tests: pass FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION to fuzzers
to let them use reproducible identifiers, which should make it possible
to really use files copied from OSS-Fuzz to reproduce issues on
GHActions and locally. Prompted by https://github.com/systemd/systemd/pull/22365
2022-02-03 08:56:00 +00:00