IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
upstream meson stopped allowing combining boolean with the plus
operator, and now requires using the logical and operator
reference:
43302d3296Fixes: #20632
Add support for systemd-pkcs11 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (pkcs11 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
Add support for systemd-fido2 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (fido2 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
The output is similar to our hand-crafted status message, but it's nice to use
the built-in functionality. After all, it was amended during development to
support our use case.
This undoes part of 4c890ad3cc: the
implementations of update-dbus-docs and update-man-rules are moved back to
man/meson.build, and alias_target() is used to keep the visible target names
unchanged.
The rules for man pages are reworked so that it's possible to invoke the
targets even if xstlproc is not available. After all, xsltproc is only needed
for the final formatted output, and not other processing.
Ubuntu Bionic 18.04 has 0.45, so it was below the previously required
minimum version already. Focal 20.04 has 0.53.2. Let's require that
and use various features that are available.
Otherwise the build sometimes fails in a racy way:
```
[274/1850] Compiling C object src/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p/cryptsetup-token-systemd-tpm2.c.o
FAILED: src/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p/cryptsetup-token-systemd-tpm2.c.o
cc -Isrc/cryptsetup/cryptsetup-tokens/libcryptsetup-token-systemd-tpm2_static.a.p (...) -c ../build/src/cryptsetup/cryptsetup-tokens/cryptsetup-token-systemd-tpm2.c
../build/src/cryptsetup/cryptsetup-tokens/cryptsetup-token-systemd-tpm2.c:12:10: fatal error: version.h: No such file or directory
12 | #include "version.h"
| ^~~~~~~~~~~
compilation terminated.
```
Follow-up to d1ae38d85a.
Add support for systemd-tpm2 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (tpm2 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
This closes an important gap: so far we would reexecute the system manager and
restart system services that were configured to do so, but we wouldn't do the
same for user managers or user services.
The scheme used for user managers is very similar to the system one, except
that there can be multiple user managers running, so we query the system
manager to get a list of them, and then tell each one to do the equivalent
operations: daemon-reload, disable --now, set-property Markers=+needs-restart,
reload-or-restart --marked.
The total time that can be spend on this is bounded: we execute the commands in
parallel over user managers and units, and additionally set SYSTEMD_BUS_TIMEOUT
to a lower value (15 s by default). User managers should not have too many
units running, and they should be able to do all those operations very
quickly (<< 1s). The final restart operation may take longer, but it's done
asynchronously, so we only wait for the queuing to happen.
The advantage of doing this synchronously is that we can wait for each step to
happen, and for example daemon-reloads can finish before we execute the service
restarts, etc. We can also order various steps wrt. to the phases in the rpm
transaction.
When this was initially proposed, we discussed a more relaxed scheme with bus
property notifications. Such an approach would be more complex because a bunch
of infrastructure would have to be added to system manager to propagate
appropriate notifications to the user managers, and then the user managers
would have to wait for them. Instead, now there is no new code in the managers,
all new functionality is contained in src/rpm/. The ability to call 'systemctl
--user user@' makes this approach very easy. Also, it would be very hard to
order the user manager steps and the rpm transaction steps.
Note: 'systemctl --user disable' is only called for a user managers that are
running. I don't see a nice way around this, and it shouldn't matter too much:
we'll just leave a dangling symlink in the case where the user enabled the
service manually.
A follow-up for https://bugzilla.redhat.com/show_bug.cgi?id=1792468 and
fa97d2fcf6.
Instead of embedding the commands to invoke directly in the macros,
let's use a helper script as indirection. This has a couple of advantages:
- the macro language is awkward, we need to suffix most commands by "|| :"
and "\", which is easy to get wrong. In the new scheme, the macro becomes
a single simple command.
- in the script we can use normal syntax highlighting, shellcheck, etc.
- it's also easier to test the invoked commands by invoking the helper
manually.
- most importantly, the logic is contained in the helper, i.e. we can
update systemd rpm and everything uses the new helper. Before, we would
have to rebuild all packages to update the macro definition.
This raises the question whether it makes sense to use the lua scriptlets when
the real work is done in a bash script. I think it's OK: we still have the
efficient lua scripts that do the short scripts, and we use a single shared
implementation in bash to do the more complex stuff.
The meson version is raised to 0.47 because that's needed for install_mode.
We were planning to raise the required version anyway…
This moves the /var/log/README content out of /var and into the
docs location, replacing the previous file with a symlink
created through a tmpfiles.d entry.
We disabled it in f73fb7b742 in response to an
apparent gcc bug. It seems that depending on the combination of optimization
options, gcc still ignores (void). But this seems to work fine with clang, so
let's re-enable the warning conditionally.
So, as it turns out AF_ALG is turned off in a lot of kernels/container
environments, including our CI. Hence, if we link against OpenSSL
anyway, let's just use that client side. It's also faster.
One of those days we should drop the khash code, and ust use OpenSSL,
once the licensing issues are resolved.
The general idea with users and groups created through sysusers is that an
appropriate number is picked when the allocation is made. The number that is
selected will be different on each system based on the order of creation of
users, installed packages, etc. Since system users and groups are not shared
between installations, this generally is not an issue. But it becomes a problem
for initrd: some file systems are shared between the initrd and the host (/run
and /dev are probably the only ones that matter). If the allocations are
different in the host and the initrd, and files survive switch-root, they will
have wrong ownership.
This makes the gids build-time-configurable for all groups and users where
state may survive the switch from initrd to the host.
In particular, all "hardware access" groups are like this: files in /dev will
be owned by them. Eventually the new udev would change ownership, but there
would be a momemnt where the files were owned by the wrong group. The
allocations are "soft-static" in the language of Fedora packaging guidelines:
the uid/gid will be used if possible, but we'll fall back to a different
one. TTY_GID is the exception, because the number is used directly.
Similarly, the possibility to configure "soft-static" uids is added for daemons
which may usefully run in the initramfs: systemd-network (lease information and
interface state is serialized to /run), systemd-resolve (stub files and
interface state), systemd-timesync (/run/systemd/timesync).
Journal files are owned by the group systemd-journal, and acls are granted
for wheel and adm.
systemd-oom and systemd-coredump are excluded from this patch: I assume that
oomd is not useful in the initrd, and coredump leaves no state (it only creates
a pipe in /run?).
The defaults are not changed: if nothing is configured, dynamic allocation will
be used. I looked at a Debian system, and the numbers are all different than
on Fedora.
For Fedora, see the list of uids and gids at https://pagure.io/setup/blob/master/f/uidgid.
In particular, systemd-network and systemd-resolve got soft-static numbers to
make it easy to transition from a non-host-specific initrd to a host system
already a few years back (https://bugzilla.redhat.com/show_bug.cgi?id=1102002).
I also requested static allocations for sgx, input, render in
https://pagure.io/packaging-committee/issue/1078,
https://pagure.io/setup/pull-request/27.
Debugging udev issues especially during the early boot is fairly
difficult. Currently, you need to enable (at least) debug logging and
start monitoring uevents, try to reproduce the issue and then analyze
and correlate two (usually) huge log files. This is not ideal.
This patch aims to provide much more focused debugging tool,
tracepoints. More often then not we tend to have at least the basic idea
about the issue we are trying to debug further, e.g. we know it is
storage related. Hence all of the debug data generated for network
devices is useless, adds clutter to the log files and generally
slows things down.
Using this set of tracepoints you can start asking very specific
questions related to event processing for given device or subsystem.
Tracepoints can be used with various tracing tools but I will provide
examples using bpftrace.
Another important aspect to consider is that using tracepoints you can
debug production systems. There is no need to install test packages with
added logging, no debuginfo packages, etc...
Example usage (you might be asking such questions during the debug session),
Q: How can I list all tracepoints?
A: bpftrace -l 'usdt:/usr/lib/systemd/systemd-udevd:udev:*'
Q: What are the arguments for each tracepoint?
A: Look at the code and search for use of DEVICE_TRACE_POINT macro.
Q: How many times we have executed external binary?
A: bpftrace -e 'usdt:/usr/lib/systemd/systemd-udevd:udev:spawn_exec { @cnt = count(); }'
Q: What binaries where executed while handling events for "dm-0" device?
A bpftrace -e 'usdt:/usr/lib/systemd/systemd-udevd:udev:spawn_exec / str(arg1) == "dm-0"/ { @cmds[str(arg4)] = count(); }'
Thanks to Thomas Weißschuh <thomas@t-8ch.de> for reviewing this patch
and contributions that allowed us to drop the dependency on dtrace tool
and made the resulting code much more concise.
In commit d895e10a a test was introduced to validate that prefix is a
child of rootprefix. However, it only works when rootprefix is "/".
Since the test is ignored when rootprefix is equal to prefix, this is
only noticed if specifying both -Drootprefix= and -Dprefix=, e.g.:
$ meson foo -Drootprefix=/foo -Dprefix=/foo/bar
meson.build:111:8: ERROR: Problem encountered: Prefix is not below
root prefix (now rootprefix=/foo prefix=/foo/bar)
On Debian, bpftool is installed in /usr/sbin, which is not in $PATH for
non-root users by default, so finding it fails.
Add a secondary, hard-coded '/usr/sbin/bpftool' after 'bpftool' so that
meson can find it.
https://packages.debian.org/sid/amd64/bpftool/filelist
This ensures that the fuzz test code is also built by default.
It also increases the test coverage a bit. Compiling the tests
*with* sanitizers is painfully slow, so this is not enabled. But
just compiling them sauté is hardly noticable. Running the tests
increases the test count and runtime:
622 tests, 26 s
to
922 tests, 35 s
I think this is acceptable.
This doesn't matter too much, but makes things a bit more consistent.
A minor advantage is that the file is not a configuration file for meson
anymore, so:
a) It is not built unless pulled in by another target. Since
we don't usually build man pages by default, this saves a tiny
amount of work.
b) When the .in file is updated, meson does not reconfigure everything,
but just rebuilds the dependent targets.
Now that the conversion is finished, time for benchmarking:
a full build with default settings (and -Dstandalonebinaries=true), yields
before this pull request: 1687 targets, 148.13s user 35.17s system 317% cpu 57.697 total
with the full pull request: 1714 targets, 143.07s user 27.87s system 314% cpu 54.369 total
The difference doesn't seem significant. Partial rebuilds might be faster as
mentioned before.
We had two big 'configuration_data' objects in meson config. (There are in fact
more. On is added in this series, and there's one for efi… But those others
have a handful variables only for specific purposes and don't matter). The two
sets are 'conf' and 'substs', and were inherited from the original autotools
system. In the past there was even a third set ('m4_defines'), but @yuwata
removed it in 348b44372f. And those two/three
systems had very similar data, but with different variable names, because of
historical reasons. They also used subtly different quoting (.set()
vs. .set10() vs. .set_quoted()), which was required because the templating
engines were not flexible enough. This meants we had more work when changing
things, and we needed to search for different variable names, etc.
With a more flexible templating engine we can do with just one
configuration_data object.
The naming of variables is very inconsistent. I tried to use more
modern style naming (UNDERSCORED_TITLE_CASE), but I didn't change existing
names too much. Only SYSTEM_DATA_UNIT_PATH is renamed to SYSTEM_DATA_UNIT_DIR
to match SYSTEM_CONFIG_UNIT_DIR.
I want to stop using 'substs'. But in this case, configure_file() is nicer
than custom_target(), because it causes meson to immediately generate the
helpers after configuration, so it's possible to do
'meson build && build/man/man ...', without building anything first.
We only substitute one variable here, so let's use a custom configuration_data()
object.
m4 was hugely popular in the past, because autotools, automake, flex, bison and
many other things used it. But nowadays it much less popular, and might not even
be installed in the buildroot. (m4 is small, so it doesn't make a big difference.)
(FWIW, Fedora dropped make from the buildroot now,
https://fedoraproject.org/wiki/Changes/Remove_make_from_BuildRoot. I think it's
reasonable to assume that m4 will be dropped at some point too.)
The main reason to drop m4 is that the syntax is not very nice, and we should
minimize the number of different syntaxes that we use. We still have two
(configure_file() with @FOO@ and jinja2 templates with {{foo}} and the
pythonesque conditional expressions), but at least we don't need m4 (with
m4_dnl and `quotes').
