IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The semantics were significantly changed in c779a44222
("hostnamed: Fix the way that static and transient host names interact", Feb. 2014),
but when the dbus api documentation was imported much later, it wasn't properly
adjusted to describe those new semantics.
34293dfafd which added systemd.hostname= also
added new behaviour.
Let's ove various bits and pieces around so that they are in more appropriate
places. Drop recommendations to set the hostname for DHCP or mDNS purposes.
Nowadays we expect tools that want to expose some different hostname to the
outside to manage that internally without affecting visible state. Also drop
mentions of DHCP or mDNS directly setting the hostname, since nowadays network
management software is expected to (and does) go through hostnamed.
Also, add a high-level description of semantics. It glosses over the details of
handling of localhost-style names. Later commits will remove this special handling
anyway.
This commit extends $SYSTEMD_COLORS to an enum variable (compared to
a simple boolean) which specifies the "colors mode". This means that, in
addition to disabling colors altogether, it's now possible to restrict
the console output to 16 or 256 colors only.
```
❯ ssh sus@xx.xx.xx.xx
Last login: Sat Nov 14 17:32:08 2020 from 10.104.45.138
17:36:19 up 0 min, 0 users, load average: 0.00, 0.00, 0.00
> systemd-analyze blame
Bootup is not yet finished (org.freedesktop.systemd1.Manager.FinishTimestampMonotonic=0).
Please try again later.
Hint: Use 'systemctl list-jobs' to see active jobs
> systemd-analyze blame
43.954s systemd-time-wait-sync.service
1.969s systemd-networkd-wait-online.service
1.559s cloud-init-local.service
1.039s cloud-init.service
414ms cloud-final.service
387ms dracut-initqueue.service
382ms initrd-switch-root.service
380ms cloud-config.service
198ms systemd-journal-flush.service
136ms systemd-udev-trigger.service
115ms initrd-parse-etc.service
97ms systemd-timesyncd.service
84ms systemd-journald.service
```
After made it configurable and set to 5s
```
❯ ssh sus@xx.xx.xx.xx
Last login: Sat Nov 14 18:41:42 2020 from 10.104.45.138
18:42:36 up 0 min, 0 users, load average: 0.16, 0.03, 0.01
> systemd-analyze blame
10.450s systemd-time-wait-sync.service
8.303s systemd-networkd-wait-online.service
1.621s cloud-init-local.service
1.068s cloud-init.service
```
The old code was only able to pass the value 0 for the inheritable
and ambient capability set when a non-root user was specified.
However, sometimes it is useful to run a program in its own container
with a user specification and some capabilities set. This is needed
when the capabilities cannot be provided by file capabilities (because
the file system is mounted with MS_NOSUID for additional security).
This commit introduces the option --ambient-capability and the config
file option AmbientCapability=. Both are used in a similar way to the
existing Capability= setting. It changes the inheritable and ambient
set (which is 0 by default). The code also checks that the settings
for the bounding set (as defined by Capability= and DropCapability=)
and the setting for the ambient set (as defined by AmbientCapability=)
are compatible. Otherwise, the operation would fail in any way.
Due to the current use of -1 to indicate no support for ambient
capability set the special value "all" cannot be supported.
Also, the setting of ambient capability is restricted to running a
single program in the container payload.
The comment is pointless, ECC systematically doesn't allow
encryption/decryption directly, only RSA does that. If you want to use
ECC for asymmetric encryption/decryption you have to combine it with key
exchange scheme and symmetric scheme. This all is not a limitation of
the Yubikey, hence don't claim so. It's just how ECC is.
They are not really boolean, because we have both ipv4 and ipv6, but
for each protocol we have either unset, no, and yes.
From https://github.com/systemd/systemd/issues/13316#issuecomment-582906817:
LinkLocalAddressing must be a boolean option, at least for ipv4:
- LinkLocalAddressing=no => no LL at all.
- LinkLocalAddressing=yes + Static Address => invalid configuration, warn and
interpret as LinkLocalAddressing=no, no LL at all.
(we check that during parsing and reject)
- LinkLocalAddressing=yes + DHCP => LL process should be subordinated to the
DHCP one, an LL address must be acquired at start or after a short N
unsuccessful DHCP attemps, and must not stop DHCP to keeping trying. When a
DHCP address is acquired, drop the LL address. If the DHCP address is lost,
re-adquire a new LL address.
(next patch will move in this direction)
- LinkLocalAddressing=fallback has no reason to exist, because LL address must
always be allocated as a fallback option when using DHCP. Having both DHCP
and LL address at the same time is an RFC violation, so
LinkLocalAdressing=yes correctly implemented is already the "fallback"
behavior. The fallback option must be deprecated and if present in older
configs must be interpreted as LinkLocalAddressing=yes.
(removed)
- And for IPv6, the LinkLocalAddress option has any sense at all? IPv6-LL
address aren't required to be always set for every IPv6 enabled interface (in
this case, coexisting with static or dynamic address if any)? Shouldn't be
always =yes?
(good question)
This effectively reverts 29e81083bd. There is no
special "fallback" mode now, so the check doesn't make sense anymore.
In NEWS, the new option was described twice, most likely because the first
description was tucked away in a paragraph about some other subject.
While at it, improve the descriptions in the man page to make it easier to grok
what that option really does.
Follow-up for ac24e418d9.
The original motivation of the commit and RFE #15339 is to start dhcpv6
client in managed mode when neither M nor O flag is set in the RA.
But, previously, if the setting is set to "always", then the DHCPv6
client is always started in managed mode even if O flag is set in the
RA. Such the behavior breaks RFC 7084.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
This beefs up the READ_FULL_FILE_CONNECT_SOCKET logic of
read_full_file_full() a bit: when used a sender socket name may be
specified. If specified as NULL behaviour is as before: the client
socket name is picked by the kernel. But if specified as non-NULL the
client can pick a socket name to use when connecting. This is useful to
communicate a minimal amount of metainformation from client to server,
outside of the transport payload.
Specifically, these beefs up the service credential logic to pass an
abstract AF_UNIX socket name as client socket name when connecting via
READ_FULL_FILE_CONNECT_SOCKET, that includes the requesting unit name
and the eventual credential name. This allows servers implementing the
trivial credential socket logic to distinguish clients: via a simple
getpeername() it can be determined which unit is requesting a
credential, and which credential specifically.
Example: with this patch in place, in a unit file "waldo.service" a
configuration line like the following:
LoadCredential=foo:/run/quux/creds.sock
will result in a connection to the AF_UNIX socket /run/quux/creds.sock,
originating from an abstract namespace AF_UNIX socket:
@$RANDOM/unit/waldo.service/foo
(The $RANDOM is replaced by some randomized string. This is included in
the socket name order to avoid namespace squatting issues: the abstract
socket namespace is open to unprivileged users after all, and care needs
to be taken not to use guessable names)
The services listening on the /run/quux/creds.sock socket may thus
easily retrieve the name of the unit the credential is requested for
plus the credential name, via a simpler getpeername(), discarding the
random preifx and the /unit/ string.
This logic uses "/" as separator between the fields, since both unit
names and credential names appear in the file system, and thus are
designed to use "/" as outer separators. Given that it's a good safe
choice to use as separators here, too avoid any conflicts.
This is a minimal patch only: the new logic is used only for the unit
file credential logic. For other places where we use
READ_FULL_FILE_CONNECT_SOCKET it is probably a good idea to use this
scheme too, but this should be done carefully in later patches, since
the socket names become API that way, and we should determine the right
amount of info to pass over.
This reverts commit 6c5496c492.
sysinit.target is shared between the initrd and the host system. Pulling in
initrd-cryptsetup.target into sysinit.target causes the following warning at
boot:
Oct 27 10:42:30 workstation-uefi systemd[1]: initrd-cryptsetup.target: Starting requested but asserts failed.
Oct 27 10:42:30 workstation-uefi systemd[1]: Assertion failed for initrd-cryptsetup.target.
v246 is long released. Hence the new scheme should be named v247.
(Interesting, how we pretty systematically for the last releases changed
the scheme only every second release)
