IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is useful when we want to avoid printf formatting on the message.
It's nicer than using log_struct with "%s" as the format, because printf
is slow and with a large message (like from a backtrace) this would require
extra unnecessary memory.
I'm not exposing all the fields in the wrapper: only level and errno.
Those are the most likely to be useful.
log_struct takes multiple format strings, each one followed by arguments.
The _printf_ annotation is not sufficiently flexible to express this,
but we can still annotate the first format string, though not its
arguments (because their number is unknown).
With the annotation, the places which specified the message id or similar
as the first pattern cause a warning from -Wformat-nonliteral. This can
be trivially fixed by putting the MESSAGE= first.
This change will help find issues where a non-literal is erroneously used
as the pattern.
This is our own header, we should include use the local-include syntax
("" not <>), to make it clear we are including the one from the build tree.
All other includes of files from src/systemd/ use this scheme.
There's some confusion: older man pages specify that linux/random.h
contains getrandom, but newer glibc has it in sys/random.h. Detect if
the newer header is available and include it. We still need the older
header for the flags.
This reverts a75e27eb. a75e27eb fixed the case of libcryptsetup=no, libblkid=yes,
but broke the case of libcryptsetup=no, libblkid=yes. Instead of trying to define
the function only when used, which would result in too much ifdeffery, just silence
the warning.
Specifying the same rule with a slightly different dep list was not useful,
since make cannot distinguish rules with the same input / output. (It possibly
could have two rules with different dependency list, but here all dependencies
that are different between the two rules are always present, so the two rules
are effectively the same.)
This work based on Tom's original patch
teg@1312172
By setting GatewayOnlink=yes, the kernel will assume that the gateway is onlink
even if there is no route to it.
Resolves issue #1283.
systemd-resolved provides
1. local API via NSS and D-Bus
2. kind of a local "DNS proxy" through its stub listener
The 1st item should be started before nss-lookup.target.
The 2nd item should be started before network-online.target,
because if the networking works in general, then DNS (and DNS proxy) should too.
Fixes#5650
e8e42b31c5 added support for having the
kernel load the IMA policy directly, but didn't check that the policy
file exists. If not, this produced a kernel message:
IMA: policy update failed
At each time pressing the WiFi Fn key on Dell Latitude E7270 laptop, the system
reports the following error/warning messages:
atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e008 ' to make it known.
This is due to commit 0e33634 which was added to fix
https://bugs.launchpad.net/ubuntu/+source/udev/+bug/1441849.
However on Dell Latitude E7* models, we need to restore the old generic
behavior which consists in ignoring the key event since it's already done by
the HW.
Indeed the hardware has a specific driver (dell_wmi) to handle rfkill in the
hardware level. So, as long as the hardware handles, the best is to leave as
is.
This patch was originally written by Takashi Iwai.
Fixes#5047
Fixup for 4b58153dd2.
I saw this because of a clang warning. With gcc the -Wformat-nonliteral warning
doesn't seem to work as expected.
In two places, a string constructed with strjoina is used as the pattern. This
is safe, because we're taking a pattern which was already marked with _printf_
and prepending a known value to it. Those places are marked with #pragma to
silence the warning.
This makes dbus-org.freedesktop.network1.service like dbus-org.freedesktop.resolve1.service.
When systemd-networkd.service is disabled, the alias is also removed.
I think it's nice to mark the test as skipped instead of omitting
it entirely, hence #ifdefs in the code instead of excluding the test
in Makefile.am/meson.build.
This is a partial revert of 2375607039. We still have code
guarded by HAVE_GLIB in tests.
v2:
- do not define the automake conditional, it wasn't used anywhere
- rename --disable-gudev to --disable-glib
v3:
- do not cause an error if the libs are not found, this is supposed
to be an "auto" dep by default.
Sets ID_INPUT_TOUCHPAD_INTEGRATION=internal for Microsoft Surface Pro Type Covers (IDs should cover at least the type covers for the Surface Pro 3 and 4). This is needed so that libinput can disable the touchpad while typing.
The power key keycode e076 is emitted on several different Acer laptop
models, and it is expected that it will also be used on upcoming models.
Verified on the following models:
Aspire ES1-421
Aspire ES1-432
Aspire A515-51
Aspire A515-51G
Aspire A517-51
Aspire A517-51G
Nitro AN515-31
According to the key code v2.02 from Acer, scancode E0 86 will be
generated for airplane mode hotkey. Verified on Aspire, TravelMate,
Easynote and Predator.
Allow setting bridge port priority in the Bridge section of the network file,
similar to e.g. port path cost setting.
Set the default to an invalid value of 128, and only set the port priority when
it's not 128. Unlike e.g. path cost, zero is a valid priority value.
Add a networkd-test.py to check that bridge port priority is correctly set.
Incidently, fix bridge port cost type and document valid ranges.
On Ubuntu 17.04 (zesty zapus) netcat-openbsd was upgraded from 1.105-7ubuntu1
to 1.130-3, at the same time the defaults got changed from -q0 to -q-1
(infinity) the net result is that `echo A | nc -U' call now hangs, preventing
the testcase to complete. One could use the old default of -q0, but that option
is not available in some netcat implementations. Thus settle to specify -w1
instead to mitigate the testcase hang.
Stored information will help us to resume execution after the
daemon-reload.
This commit implements following scheme,
* On serialization:
- we count rank of the currently executing command
- we store command type, its rank and command line arguments
* On deserialization:
- configuration is parsed and loaded
- we deserialize stored data, command type, rank and arguments
- we look at the given rank in the list and if command there has same
arguments then we restore execution at that point
- otherwise we search respective command list and we look for command
that has the same arguments
- if both methods fail we do not do not resume execution at all
To better illustrate how does above scheme works, please consider
following cases (<<< denotes position where we resume execution after reload)
; Original unit file
[Service]
ExecStart=/bin/true <<<
ExecStart=/bin/false
; Swapped commands
; Second command is not going to be executed
[Service]
ExecStart=/bin/false
ExecStart=/bin/true <<<
; Commands added before
; Same commands are problematic and execution could be restarted at wrong place
[Service]
ExecStart=/bin/foo
ExecStart=/bin/bar
ExecStart=/bin/true <<<
ExecStart=/bin/false
; Commands added after
; Same commands are not an issue in this case
[Service]
ExecStart=/bin/true <<<
ExecStart=/bin/false
ExecStart=/bin/foo
ExecStart=/bin/bar
; New commands interleaved with old commands
; Some new commands will be executed while others won't
ExecStart=/bin/foo
ExecStart=/bin/true <<<
ExecStart=/bin/bar
ExecStart=/bin/false
As you can see, above scheme has some drawbacks. However, in most
cases (we assume that in most common case unit file command list is not
changed while some other command is running for the same unit) it
should cause that systemd does the right thing, which is restoring
execution exactly at the point we were before daemon-reload.
Fixes#518
manager_sync_bus_names() function retrieves the dbus names
and compares it with unit bus names. It could be right
after the list is retrieved, the dbus peer is disconnected.
In this case it is really not an ERROR print if
sd_bus_get_name_creds() or sd_bus_creds_get_unique_name()
fail.
At present, devices implementing the BTN_DPAD_UP/DOWN/LEFT/RIGHT
codes will be incorrectly classified as key devices. This causes
devices respecting the Linux gamepad spec (such as the DS3 as of
kernel 4.12) to be classified as keyboards by X11.
This is caused by the test_key function checking all codes on
[KEY_OK, BTN_TRIGGER_HAPPY). Unfortunately the BTN_DPAD_* codes
are placed between KEY_LIGHTS_TOGGLE and KEY_ALS_TOGGLE. This
patch splits the upper key block check into the block before and
after the BTN_DPAD_* codes. An array is used to avoid dedicated,
per block loops in the event that more event codes are added in
the future.
When using pkg-config to determine the include flags for blkid the
flags are returned as:
$ pkg-config blkid --cflags
-I/usr/include/blkid -I/usr/include/uuid
We use the <blkid/blkid.h> include which would be correct when using
the default compiler /usr/include header search path. However, when
cross-compiling the blkid.h will not be installed at /usr/include and
highly likely in a temporary system root. It is futher compounded if
the cross-compile packages are split up and the blkid package is not
available in the same sysroot as the compiler.
Regardless of the compilation setup, the correct include path should be
<blkid.h> if using the pkg-config returned CFLAGS.
Due to ARM not having an EFI capable objcopy we need to use the binary
output argument. This is correctly set up for AArch64 but is missed
when building for ARM32. This patch adds the ARCH_ARM automake define
which can then be used in the makefile to determine if to use the
correct linker flags.
The addition of the ARM32 flags is a copy and paste from the AArch64 to
create a logical OR for the ARCH_AARCH64 and ARCH_ARM variables. I
couldn't figure out a better way to create the conditional with basic
Make language constructs.
When the user provides the --with-efi-includedir we incorrectly search
for the header at /usr/include not the provided location. This patch
changes the check to use the provided value so that non-standard header
locations are supported.
This situation occurs commonly when cross-compiling systemd because the
GNU EFI headers and library will not be installed into the root
locations but highly likely a temporary system root.
