IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
ImportCredential= takes a credential name and searches for a matching
credential in all the credential stores we know about it. It supports
globs which are expanded so that all matching credentials are loaded.
This adds support for KSM (kernel samepage merging). It adds a new
boolean parameter called MemoryKSM to enable the feature. The feature
can only be enabled with newer kernels.
Dump*() methods can take quite some time due to the amount of data to
serialize, so they can potentially stall the manager. Make them
privileged, as they are debugging tools anyway. Use a new 'dump'
capability for polkit, and the 'reload' capability for SELinux, as
that's also non-destructive but slow.
If the caller is not privileged, allow it but rate limited to 10 calls
every 10 minutes.
This implements a minimal subset of #24961, but in a lot more
restrictive way: we only allow one level of subcgroup (as that's enough
to address the no-processes in inner cgroups rule), and does not change
anything about threaded cgroup logic or similar, or make any of this new
behaviour mandatory.
All this does is this: all non-control processes we invoke for a unit
we'll invoke in a subgroup by the specified name.
We'll later port all our current services that use cgroup delegation
over to this, i.e. user@.service, systemd-nspawn@.service and
systemd-udevd.service.
Oftentimes it is useful to allow the per-service fd store to survive
longer than for a restart. This is useful in various scenarios:
1. An fd to some security relevant object needs to be stashed somewhere,
that should not be cleaned automatically, because the security
enforcement would be dropped then.
2. A user namespace fd should be allocated on first invocation and be
kept around until the user logs out (i.e. systemd --user ends), á la
#16328 (This does not implement what #16318 asks for, but should
solve the use-case discussed there.)
3. There's interest in allow a concept of "userspace reboots" where the
kernel stays running, and userspace is swapped out (i.e. all services
exit, and the rootfs transitioned into a new version of it) while
keeping some select resources pinned, very similar to how we
implement a switch root. Thus it is useful to allow services to exit,
while leaving their fds around till the very end.
This is exposed through a new FileDescriptorStorePreserve= setting that
is closely modelled after RuntimeDirectoryPreserve= (in fact it reused
the same internal type), since we want similar behaviour in the end, and
quite often they probably want to be used together.
This is a followup to
413e8650b7
> tree-wide: Use "unmet" for condition checks, not "failed"
Since I noticed when running `systemctl status` on a recent
systemd still seeing
`Condition: start condition failed`
To recap the original rationale here for "unmet" is that it's
normal for some units to be conditional, so the term "failure"
here is too strong.
Follow-up for #26902 and #26971
Let's always calculate the next restart interval
since that's more useful.
For that, we add 1 to s->n_restarts unconditionally,
and change RestartUSecCurrent property to RestartUSecNext.
interval between restarts
RestartSteps= accepts a positive integer as the number of steps
to take to increase the interval between auto-restarts from
RestartSec= to RestartSecMax=, or 0 to disable it.
Closes#6129
This augments the existing KillUnit() + Kill() methods with
QueueSignalUnit() + QueueSignal(), which are what sigqueue() is to
kill().
This is useful for sending our new SIGRTMIN+18 control signals to system
services.
A pid can be recycled, but a pidfd is pinned. Add a new method that is safer
as it takes a pidfd as input.
Return not only the D-Bus object path, but also the unit id and the last
recorded invocation id, as they are both useful (especially the id, as
converting from a path object to a unit id from a script requires another
round-trip via D-Bus).
Note that the manager still tracks processes by pid, so theorethically this
is not fully error-proof, but on the other hand the method response is
synchronous and the manager is single-threaded, so once a call is being
processed the unit database will not change anyway. Once the manager
switches to use pidfds everywhere, this can be further hardened.
Define new unit parameter (LogFilterPatterns) to filter logs processed by
journald.
This option is used to store a regular expression which is carried from
PID1 to systemd-journald through a cgroup xattrs:
`user.journald_log_filter_patterns`.
Trying to disable a unit with no install info is mostly useless, so
adding a warning like we do for enable (with the new dbus method
'DisableUnitFilesWithFlagsAndInstallInfo()'). Note that it would
still find and remove symlinks to the unit in /etc, regardless of
whether it has install info or not, just like before. And if there are
actually files to remove, we suppress the warning.
Fixes#17689
The new function DumpPatterns() can be used to limit (drastically) the size of
the data returned by PID1. Hence the optimization of serializing data into a
file descriptor should be less relevant than having the possibility to limit
the data when communicating with the service manager remotely.
NB: when passing patterns, the dump command omits the version of the manager as
well as the features and the timestamps.
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
Follow-up for 10f3f4ed01.
We already have RuntimeWatchdogUSec or friends. Let's not introduce
redundant properties.
Also, drop the const qualifier for WatchdogLastPingTimestamp, as they
are actually not constant.
Not wired in by any unit type yet, just the basic to allocate,
ref, deref and plug in to other unit types.
Includes recording the trigger unit name and passing it to the
triggered unit as TRIGGER_UNIT= env var.
Do not go back to disk on each selinux access, but instead cache the
label off the inode we are actually reading. That way unit file contents
and unit file label we use for access checks are always in sync.
Based on discussions here:
https://github.com/systemd/systemd/pull/10023#issuecomment-1179835586
Replaces:
https://github.com/systemd/systemd/pull/23910
This changes behaviour a bit, because we'll reach and cache the label at
the moment of loading the unit (i.e. usually on boot and reload), but
not after relabelling. Thus, users must refresh the cache explicitly via
a "systemctl daemon-reload" if they relabelled things.
This makes the SELinux story a bit more debuggable, as it adds an
AccessSELinuxContext bus property to units that will report the label we are
using for a unit (or the empty string if not known).
This also drops using the "source" path of a unit as label source. if
there's value in it, then generators should manually copy the selinux
label from the source files onto the generated unit files, so that the
rule that "access labels are read when we read the definition files" is
upheld. But I am not convinced this is really a necessary, good idea.
In the welcome line, use NAME= as the fallback for PRETTY_NAME=.
PRETTY_NAME= doesn't have to be set, but NAME= should.
Example output:
---
Welcome to Fedora Linux 37 (Rawhide Prerelease)!
[ !! ] This OS version (Fedora Linux 37 (Rawhide Prerelease)) is past its end-of-support date (1999-01-01)
Queued start job for default target graphical.target.
[ OK ] Created slice system-getty.slice.
---
We had a description in README, and an outdated list in the man page.
I think we should keep a reference-style list in the man page. The description
in README is more free-form.
This reverts PR #22587 and its follow-up commit. More specifically,
2299b1cae3 (partially),
e176f85527,
ceb46a31a0, and
51bb9076ab.
The PR was merged without final approval, and has several issues:
- OSS fuzz reported issues in the conf parser,
- It calls synchrnous netlink call, it should not be especially in PID1,
- The importance of NFTSet for CGroup and DynamicUser may be
questionable, at least, there was no justification PID1 should support
it.
- For networkd, it should be implemented with Request object,
- There is no test for the feature.
Fixes#23711.
Fixes#23717.
Fixes#23719.
Fixes#23720.
Fixes#23721.
Fixes#23759.
New directive `DynamicUserNFTSet=` provides a method for integrating
configuration of dynamic users into firewall rules with NFT sets.
Example:
```
table inet filter {
set u {
typeof meta skuid
}
chain service_output {
meta skuid != @u drop
accept
}
}
```
```
/etc/systemd/system/dunft.service
[Service]
DynamicUser=yes
DynamicUserNFTSet=inet:filter:u
ExecStart=/bin/sleep 1000
[Install]
WantedBy=multi-user.target
```
```
$ sudo nft list set inet filter u
table inet filter {
set u {
typeof meta skuid
elements = { 64864 }
}
}
$ ps -n --format user,group,pid,command -p `pgrep sleep`
USER GROUP PID COMMAND
64864 64864 55158 /bin/sleep 1000
```
