IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
This is might be useful in some cases, but it's primarily an example for
a boot check service that can be plugged before boot-complete.target.
It's disabled by default.
All it does is check whether the failed unit count is zero
This is the counterpiece to the boot counting implemented in
systemd-boot: if a boot is detected as successful we mark drop the
counter again from the booted snippet or kernel image.
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
Explicit systemctl calls remain in systemd-halt.service and the system
systemd-exit.service. To convert systemd-halt, we'd need to add
SuccessAction=halt-force. Halting doesn't make much sense, so let's just
leave that is. systemd-exit.service will be converted in the next commit.
systemd offline-updates allows dropping multiple system update units
to be added to system-update.target.wants.
As documented in systemd.offline-updates(7) only 1 of these units
should actually be active (based on the /system-update symlink) and
when that unit is done it should reboot the system.
In some cases it is desirable to run a unit whenever booting in
offline-updates mode indepedent of which update unit is going to
handle the update. One example of this is integration with bootloader
code which checks if the previous boot was succesful.
Since the active unit will reboot the system when it is done, there
is no guarantee that adding such a unit to system-update.target.wants
will get it executed always.
This commit adds a system-update-pre.target which can be used for
units which should always run when booting in offline-updates mode.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
Unfortunately this needs a new binary to do the mount because there's just
too many special steps to outsource this to systemd-mount:
- EPERM needs to be treated specially
- UserRuntimeDir= setting must be obeyed
- SELinux label must be adjusted
This allows user@.service to be started independently of logind.
So 'systemctl start user@nnn' will start the user manager for user nnn.
Logind will start it too when the user logs in, and will stop it (unless
lingering is enabled) when the user logs out.
Fixes#7339.
This removes the UserTasksMax= setting in logind.conf. Instead, the generic
TasksMax= setting on the slice should be used. Instead of a transient unit we
use a drop-in to tweak the default definition of a .slice. It's better to use
the normal unit mechanisms instead of creating units on the fly. This will also
make it easier to start user@.service independently of logind, or set
additional settings like MemoryMax= for user slices.
The setting in logind is removed, because otherwise we would have two sources
of "truth": the slice on disk and the logind config. Instead of trying to
coordinate those two sources of configuration (and maintainer overrides to
both), let's just convert to the new one fully.
Right now now automatic transition mechanism is provided. logind will emit a
hint when it encounters the setting, but otherwise it will be ignored.
Fixes#2556.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
`-.mount` is placed in `system.slice`, and hence depends on it.
`-.mount` is always active and can never be stopped. Therefore the same
should be true of `system.slice`.
Synthesize it as perpetual (unless systemd is running as a user manager).
Notice we also drop `Before=slices.target` as unnecessary.
AFAICS the justification for `perpetual` is to provide extra protection
against unintentionally stopping every single service. So adding
system.slice to the perpetual units is perfectly consistent.
I don't expect this will (or can) fix any other problem. And the
`perpetual` protection probably isn't formal enough to spend much time
thinking about. I've just noticed this a couple of times, as something
that looks strange.
Might be a bit surprising that we have user.slice on-disk but not
system.slice, but I think it's ok. `systemctl status system.slice` will
still point you towards `man systemd.special`. The only detail is that the
system slice disables `DefaultDependencies`. If you're worrying about how
system shutdown works when you read `man systemd.slice`, I think it is not
too hard to guess that system.slice might do this:
> Only slice units involved with early boot
> or late system shutdown should disable this option
(Docs are great. I really appreciate the systemd ones).
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
remote-cryptsetup-pre.target was designed as an active unit (that pulls in
network-online.target), the opposite of remote-fs-pre.target (a passive unit,
with individual provider services ordering itself before it and pulling it in,
for example iscsi.service and nfs-client.target).
To make remote-cryptsetup-pre.target really work, those services should be
ordered before it too. But this would require updates to all those services,
not just changes from systemd side.
But the requirements for remote-fs-pre.target and remote-cryptset-pre.target
are fairly similar (e.g. iscsi devices can certainly be used for both), so
let's reuse remote-fs-pre.target also for remote cryptsetup units. This loses
a bit of flexibility, but does away with the requirement for various provider
services to know about remote-cryptsetup-pre.target.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
The pair is similar to remote-fs.target and remote-fs-pre.target. Any
cryptsetup devices which require network shall be ordered after
remote-cryptsetup-pre.target and before remote-cryptsetup.target.
This new target is a passive unit, hence it is supposed to be pulled in
to the transaction by the service that wants to block login on the
console (e.g. text version of initial-setup). Now both getty and
serial-getty are ordered after this target.
https://lists.freedesktop.org/archives/systemd-devel/2015-July/033754.html
/var can be on a remote filesystem, thus hooking it to local-fs.target is not correct.
Also, only install the mount unit when machined is enabled, because
machined is the one managing the underlying device, and thus makes no
sense without machined.
Fixes#1175
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
Ideally, we would chain the m4 processing, .in substitutions, and file
installation so that the commands don't have to be repeated. Unfortunately
this does not seem currently possible, because custom_target() output cannot
be fed into install_data(), so it's necessary to use the 'install',
'install_dir' arguments to control installation. Nevertheless, rework the
rules to repeat less stuff and unify handling of conditions between the
different file types.
This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook.
I did not bother to create the directories into which we install files,
since they will be created anyway.
v2:
- remove bashism
This is the equivalent of $(SYSTEM_UNIT_ALIASES) and $(GENERAL_ALIASES)
in Makefile.am.
ninja-build uninstall does not remove the symlinks, see
https://github.com/mesonbuild/meson/issues/1602.
I don't consider this a blocker: after all either one installs into $DESTDIR,
where uninstallation doesn't make much sense, or into a real system, where a
successfull uninstallation would likely destroy the system.
v2:
- remove bashisms
- add various forgotten symlinks and fix service/timer/target confusions
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
