IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We don't care about the ordering, so we may just as well drop the numerical
prefixes that we normally use for sorting. Also rename some other samples
to keep width of output down to reasonable width.
The lists of directives for fuzzer tests are maintained manually in the
repo. There is a tools/check-directives.sh script that runs during test
phase and reports stale directive lists.
Let's rework the script into a generator so that these directive files
are created on-the-flight and needn't be updated whenever a unit file
directives change. The scripts is rewritten in Python to get rid of gawk
dependency and each generated file is a separate meson target so that
incremental builds refresh what is just necessary (and parallelize
(negligible)).
Note: test/fuzz/fuzz-unit-file/directives-all.slice is kept since there
is not automated way to generate it (it is not covered by the check
script neither).
New directive `NetLabel=` provides a method for integrating static and dynamic
network configuration into Linux NetLabel subsystem rules, used by Linux
Security Modules (LSMs) for network access control. The label, with suitable
LSM rules, can be used to control connectivity of (for example) a service with
peers in the local network. At least with SELinux, only the ingress can be
controlled but not egress. The benefit of using this setting is that it may be
possible to apply interface independent part of NetLabel configuration at very
early stage of system boot sequence, at the time when the network interfaces
are not available yet, with netlabelctl(8), and the per-interface configuration
with systemd-networkd once the interfaces appear later. Currently this feature
is only implemented for SELinux.
The option expects a single NetLabel label. The label must conform to lexical
restrictions of LSM labels. When an interface is configured with IP addresses,
the addresses and subnetwork masks will be appended to the NetLabel Fallback
Peer Labeling rules. They will be removed when the interface is
deconfigured. Failures to manage the labels will be ignored.
Example:
```
[DHCPv4]
NetLabel=system_u:object_r:localnet_peer_t:s0
```
With the above rules for interface `eth0`, when the interface is configured with
an IPv4 address of 10.0.0.123/8, `systemd-networkd` performs the equivalent of
`netlabelctl` operation
```
$ sudo netlabelctl unlbl add interface eth0 address:10.0.0.0/8 label:system_u:object_r:localnet_peer_t:s0
```
Result:
```
$ sudo netlabelctl -p unlbl list
...
interface: eth0
address: 10.0.0.0/8
label: "system_u:object_r:localnet_peer_t:s0"
...
```
This reverts PR #23269 and its follow-up commit. Especially,
2299b1cae3 (partially), and
3cf63830ac.
The PR was merged without final approval, and has several issues:
- The NetLabel for static addresses are not assigned, as labels are
stored in the Address objects managed by Network, instead of Link.
- If NetLabel is specified for a static address, then the address
section will be invalid and the address will not be configured,
- It should be implemented with Request object,
- There is no test about the feature.
This reverts PR #22587 and its follow-up commit. More specifically,
2299b1cae3 (partially),
e176f85527,
ceb46a31a0, and
51bb9076ab.
The PR was merged without final approval, and has several issues:
- OSS fuzz reported issues in the conf parser,
- It calls synchrnous netlink call, it should not be especially in PID1,
- The importance of NFTSet for CGroup and DynamicUser may be
questionable, at least, there was no justification PID1 should support
it.
- For networkd, it should be implemented with Request object,
- There is no test for the feature.
Fixes#23711.
Fixes#23717.
Fixes#23719.
Fixes#23720.
Fixes#23721.
Fixes#23759.
New directives `NFTSet=`, `IPv4NFTSet=` and `IPv6NFTSet=` provide a method for
integrating configuration of dynamic networks into firewall rules with NFT
sets.
/etc/systemd/network/eth.network
```
[DHCPv4]
...
NFTSet=netdev:filter:eth_ipv4_address
```
```
table netdev filter {
set eth_ipv4_address {
type ipv4_addr
flags interval
}
chain eth_ingress {
type filter hook ingress device "eth0" priority filter; policy drop;
ip saddr != @eth_ipv4_address drop
accept
}
}
```
```
sudo nft list set netdev filter eth_ipv4_address
table netdev filter {
set eth_ipv4_address {
type ipv4_addr
flags interval
elements = { 10.0.0.0/24 }
}
}
```
New directive `NetLabel=` provides a method for integrating dynamic network
configuration into Linux NetLabel subsystem rules, used by Linux security
modules (LSMs) for network access control. The option expects a whitespace
separated list of NetLabel labels. The labels must conform to lexical
restrictions of LSM labels. When an interface is configured with IP addresses,
the addresses and subnetwork masks will be appended to the NetLabel Fallback
Peer Labeling rules. They will be removed when the interface is
deconfigured. Failures to manage the labels will be ignored.
Example:
```
[DHCP]
NetLabel=system_u:object_r:localnet_peer_t:s0
```
With the above rules for interface `eth0`, when the interface is configured with
an IPv4 address of 10.0.0.0/8, `systemd-networkd` performs the equivalent of
`netlabelctl` operation
```
$ sudo netlabelctl unlbl add interface eth0 address:10.0.0.0/8 label:system_u:object_r:localnet_peer_t:s0
```
Result:
```
$ sudo netlabelctl -p unlbl list
...
interface: eth0
address: 10.0.0.0/8
label: "system_u:object_r:localnet_peer_t:s0"
...
```
Add the "Isolated" parameter in the *.network file, e.g.,
[Bridge]
Isolated=true|false
When the Isolated parameter is true, traffic coming out of this port
will only be forward to other ports whose Isolated parameter is false.
When Isolated is not specified, the port uses the kernel default
setting (false).
The "Isolated" parameter was introduced in Linux 4.19.
See man bridge(8) for more details.
But even though the kernel and bridge/iproute2 recognize the "Isolated"
parameter, systemd-networkd did not have a way to set it.
Previously, the prefix delegation is enabled when at least one
downstream interfaces request it. But, when the DHCPv6 client on the
upstream interface is configured, some downstream interfaces may not
exist yet, nor have .network file assigned.
Also, if a system has thousands of interfaces, then the previous logic
introduce O(n^2) search.
This makes the prefix delegation is always enabled, except when it is
explicitly disabled. Hopefully, that should not break anything, as the
DHCPv6 server should ignore the prefix delegation request if the server
do not have any prefix to delegate.
