IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
networkd ignores errors in reading driver through ethtool. The kind of
network interface is retrieved through netlink, and networkd checks
checks many failures. So, using Kind= should be safer.
No functional change, just for safety.
Also this renames 80-ethernet.network.example -> 89-ethernet.network.example,
to make it have lower precedence over other default .network files for
Ethernet interfaces.
Closes#29765.
This is name ".network.example" for now, to match the existing
80-ethernet.network file.
I think it would make sense to actually install this by default if told
so via a meson file (and then hopefully this would happen even on
Fedora, though in a split off RPM or so). However, we aren't there yet,
hence for now, just ship the .network files as example, like the others.
Arguably, CC0 is just fine for examples since they are not code. But it's
easier to be consistent and just use MIT-0 for all "documentation". Thus,
the license is changed similarly code examples under man/.
Based on 'git shortlog -ns network/*' and 'git log -p', the following folks
should ack this:
Zbigniew Jędrzejewski-Szmek
Lennart Poettering
Tom Gundersen
Yu Watanabe
Daan De Meyer
Marc-André Lureau
The file has instructions how to "enable" it by symlinking into the
appropriate place. If we create a different mechanism to do enablement
later on, we can always adjust the instructions.
Closes#3998.
Same justification as the previous commit.
$ for i in network/*-*; do git blame $i;done | less
shows that those files were written by Tom Gundersen, Lennart Poettering, Yu
Watanabe, me, and Marc-André Lureau.
This matches what we have for example programs under man/, and is nice
because it allows people to copy the files as they wish without worrying
about copyright. The files are too trivial to copyright anyway.
RAs trigger neighbor discovery which allows users to query the
LL address of the container/VM via `ip neighbor get dev`. This is
useful as it gives users an easy way to connect to the container
without needing LLMNR or mDNS to resolve the hostname of the container
to an IP address. In practice, this allows connecting with only
networkd enabled and without resolved running in the host/container.
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
I think 80-wifi-adhoc.network is safe enough, since it just enables
the link-local addressing. But the other two enable DHCP in client
or server modes, and we should not do this by default.
If "keep" policy is specified, and the interface has a name that is
NET_NAME_USER or NET_NAME_RENAMED, we stop processing rules. "keep" should
probably be specified either first or last depending on the preference.
This partially reimplements 55b6530baa, in the
sense that if the "keep" policy is not specified, and if the interface has
a NamingPolicy, it will be renamed, even if it had a name previously.
So this breaks backwards compatibility in this case, but that's more in line
with what users expect.
Closes#9006.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook.
I did not bother to create the directories into which we install files,
since they will be created anyway.
v2:
- remove bashism
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
This changes the default .network files we ship for nspawn containers to set
EmitLLDP=customer-bridge in order to allow propagation of the LLDP packets
across bridges. This is useful so that "networkctl status" shows all peers
connected to a virtual container network, collecting this data via LLDP. This
is safe since the default configuration for these interfaces does not bridge
these links to external interfaces, but relies on IP routing for this.
'LinkLocal' was renamed to 'LinkLocalAddressing' in:
commit 56fd6bf795
Author: Tom Gundersen <teg@jklm.no>
Date: Sat Feb 14 00:32:26 2015 +0100
networkd: .network - rename LinkLocal to LinkLocalAddressing
..but apparently the network files were not updated. Fix this.