IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Build option "link-portabled-shared" to build a statically linked
systemd-portabled by using
-Dlink-portabled-shared=false
on systems with full systemd stack except systemd-portabled, such
as CentOS/RHEL 9.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
Most of the support for valgrind was under HAVE_VALGRIND_VALGRIND_H, i.e. we
would enable if the valgrind headers were found. The operations then we be
conditionalized on RUNNING_UNDER_VALGRIND.
But in a few places we had code which was conditionalized on VALGRIND, i.e. the
config option. I noticed because I compiled with -Dvalgrind=true on a machine
that didn't have valgrind.h, and the build failed because
RUNNING_UNDER_VALGRIND was not defined. My first idea was to add a check that
the header is present if the option is set, but it seems better to just remove
the option. The code to support valgrind is trivial, and if we're
!RUNNING_UNDER_VALGRIND, it has negligible cost. And the case of running under
valgrind is always some special testing/debugging mode, so we should just do
those extra steps to make valgrind output cleaner. Removing the option makes
things simpler and we don't have to think if something should be covered by the
one or the other configuration bit.
I had a vague recollection that in some places we used -Dvalgrind=true not
for valgrind support, but to enable additional cleanup under other sanitizers.
But that code would fail to build without the valgrind headers anyway, so
I'm not sure if that was still used. If there are uses like that, we can
extend the condition for cleanup_pools().
Allow defining the default keymap to be used by
vconsole-setup through a build option. A template
vconsole.conf also gets populated by tmpfiles if
it doesn't exist.
Config options are -Ddefault-timeout-sec= and -Ddefault-user-timeout-sec=.
Existing -Dupdate-helper-user-timeout= is renamed to -Dupdate-helper-user-timeout-sec=
for consistency. All three options take an integer value in seconds. The
renaming and type-change of the option is a small compat break, but it's just
at compile time and result in a clear error message. I also doubt that anyone was
actually using the option.
This commit separates the user manager timeouts, but keeps them unchanged at 90 s.
The timeout for the user manager is set to 4/3*user-timeout, which means that it
is still 120 s.
Fedora wants to experiment with lower timeouts, but doing this via a patch would
be annoying and more work than necessary. Let's make this easy to configure.
The option is added because we have a similar one for kernel-install. This
program requires python, and some people might want to skip it because of this.
The tool is installed in /usr/lib/systemd for now, since the interface might
change.
A template file is used, but there is no .in suffix.
The problem is that we'll later want to import the file as a module
for tests, but recent Python versions make it annoyingly hard to import
a module from a file without a .py suffix. imp.load_sources() works, but it
is deprecated and throws warnings.
importlib.machinery.SourceFileLoader().load_module() works, but is also
deprecated. And the documented replacements are a maze of twisted little
callbacks that result in an empty module.
So let's take the easy way out, and skip the suffix which makes it easy
to import the template as a module after adding the directory to sys.path.
In the Xen case, it's the hypervisor which manages kexec. We thus
have to ask it whether a kernel is loaded, instead of relying on
/sys/kernel/kexec_loaded.
There might be (embedded) systems that get never updated (things like
e.g. entertainment systems of trains, for example) and where the adjustment of
the system clock (introduced by b10abe4bba) would
do the wrong thing even if the difference between the systemd build time and
the rtc is 15 years or more.
This patch allows disabling the adjustment by setting
'clock-valid-range-usec-max' meson option to 0 or to a negative value.
Integers and booleans are supposed to be actual integers and booleans,
not strings describing their value, but Meson silently accepted either
one. It's still wrong to do it though, and other implementations of
Meson such as muon choke on it.
0 UID and GID are special, and should not be acceptable for the settings.
Hence, we can handle 0 as unset.
Strictly speaking, time epoch with 0 is valid, but I guess no one use
0 as a valid value.
The journalctl tool may be needed on cross compilation hosts in order
to run --update-catalog against a target rootfs.
To avoid reliability issues caused by shared linking allow journalctl
to be linked statically.
DefaultSmackProcessLabel tells systemd what label to assign to its child
process in case SmackProcessLabel is not set in the service file. By
default, when DefaultSmackProcessLabel is not set child processes inherit
label from systemd.
If DefaultSmackProcessLabel is set to "/" (which is an invalid character
for a SMACK label) the DEFAULT_SMACK_PROCESS_LABEL set during compilation
is ignored and systemd act as if the option was unset.
I think developers are particularly unlikely to find the descriptions
useful, and would benefit from being able to copy&paste unit names.
Let's make this choice automatically.
https://github.com/systemd/systemd/pull/23192 caused breakage in
Arch Linux's build tooling. Let's give users an opt-out aside from
reverting the patch. It's hardly any maintenance work on our side
and gives users an easy way to revert the locale change if needed.
Of course, by default we still pick C.UTF-8 if the option is not
specified.
We're already using C.UTF-8 as the default locale for nspawn. Let's
make the same change for the default-locale option instead of deciding
what to use based on the locale used by the host system. Users can
still override the locale using the default-locale option if needed.
With an intentional mistake:
../src/login/logind-dbus.c: In function ‘bus_manager_log_shutdown’:
../src/login/logind-dbus.c:1542:39: error: format ‘%s’ expects a matching ‘char *’ argument [-Werror=format=]
1542 | LOG_MESSAGE("%s %s", message),
| ^~~~~~~
A compile time option is added to select behaviour: by default
UNIT_FILE_PRESET_ENABLE_ONLY is still used, but the intent is to change to
UNIT_FILE_PRESET_FULL at some point in the future. Distros that want to
opt-in can use the config option to change the behaviour.
(The option is just a boolean: it would be possible to make it multi-valued,
and allow full, enable-only, disable-only, none. But so far nobody has asked
for this, and it's better not to complicate things needlessly.)
With the configuration option flipped, instead of only doing enablements,
perform a full preset on first boot. The reason is that although
`/etc/machine-id` might be missing, there may be other files provisioned in
`/etc` (in fact, this use case is mentioned in `log_execution_mode`). Some of
those possible files include enablement symlinks even if presets dictate it
should be disabled.
Such a seemingly contradictory situation occurs in {RHEL,Fedora} CoreOS,
where we ship `/etc` as if `preset-all` were called. However, we want to
allow users to disable default-enabled services via Ignition, which does
this by creating preset dropins before switchroot. (For why we do
`preset-all` at compose time, see:
https://github.com/coreos/fedora-coreos-config/pull/77).
For example, the composed FCOS image has a `enable zincati.service`
preset and an enablement for that in `/etc`, while at boot time when we
switch root, there may be a `disable zincati.service` preset with higher
precedence. In that case, we want systemd to disable the service.
This is essentially a revert of 304b3079a2. It seems like systemd
*used* to do this, but it was changed to try to make the container
workflow a bit faster.
Resolves: https://github.com/coreos/fedora-coreos-tracker/issues/392
Co-authored-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Compression and decompression are controlled by the same build flag,
so if one wants to use, say, LZ4 to compress, ZSTD has to be disabled,
which means one loses the ability to read zstd-compressed journals.
Add a default-compression meson option, that allows to select any of
the available compression algorithms as the default.
Defaults to /bin/bash, no changes in the default configuration
The fallback shell for non-root users is as-specified,
and the interactive shell for nspawn sessions is started as
exec(default-user-shell, "-" + basename(default-user-shell), ...)
before falling through to bash and sh
Apparently Grub is measuring all kinds of garbage into PCR 8. Since people
apparently chainload sd-boot from grub, let's thus stay away from PCR 8,
and use PCR 12 instead for the kernel command line.
As discussed here: #22635Fixes: #22635
mostly to make sure that systemd is buildable without some dependencies
but other than that it should make it easier to build it with MSan without
having to compile all the dependencies with MSan.
Changing the efi compiler this way doesn't really work. The gnu-efi
header checks as well as supported compiler flag checks use the
regular cc that meson detects. Changing the compiler this way will
end up with bad compiler flags. For the very same reason, this does
not work with a cross-compiler without going through proper meson
cross-compilation steps either.
The proper way to build systemd-boot with a different compiler is to
use a different build folder and then just use the proper ninja build
target to only build the bootloader/stub.
We have /usr/lib/systemd/libsystemd-{shared,core}-nnn.so. With this
path the 'nnn' part can be changed to something different. The idea
is that during a package build this will be set to the package version.
This way during in-place upgrades with the same major version both
the new and old libraries can cooexit. This should fix the issue
when systemd programs are called during package upgrades and fail
to exec because the expect different symbols in the library they
are linked to.
This should fix https://bugzilla.redhat.com/show_bug.cgi?id=1906010.
Build option "link-boot-shared" to build a statically linked bootctl and
systemd-bless-boot by using
-Dlink-boot-shared=false
on systems with full systemd stack except bootctl and systemd-bless-boot,
such as CentOS/RHEL 9.
For LTO to work, the linker has to be called with some magic sauce arguments.
And the easiest way to get those is to just let the compiler to the job for us.
Any recent shim will refuse starting an image that does not have an sbat section
and will do so with a generic "Security Violation" message. And it is very easy
to forget passing -Dsbat-distro=auto to meson when creating a fresh build dir.
Adding sbat info when shim is not used or secure boot is disabled does not hurt
anyone, so default to auto. This still ensures to not add auto-detected info in
case we are cross building.
In upstream, we have a linearly-growing list of net-naming-scheme defines;
we add a new one for every release where we make user-visible changes to the
naming scheme.
But the general idea was that downstream distributions could define their
own combinations (or even just their own names for existing combinations),
so provide stability for their users. So far this required patching of the
netif-naming-scheme.c and .h files to add the new lines.
With this patch, patching is not required:
$ meson configure build \
-Dextra-net-naming-schemes=gargoyle=v238+npar_ari+allow_rerenames,gargoyle2=gargoyle+nspawn_long_hash \
-Ddefault-net-naming-scheme=gargoyle2
or even
$ meson configure build \
-Dextra-net-naming-schemes=gargoyle=v238+npar_ari+allow_rerenames,gargoyle2=gargoyle+nspawn_long_hash,latest=v249 \
-Ddefault-net-naming-scheme=gargoyle2
The syntax is a comma-separated list of NAME=name+name+…
This syntax is a bit scary, but any typos result in compilation errors,
so I think it should be OK in practice.
With this approach, we don't allow users to define arbitrary combinations:
what is allowed is still defined at compilation time, so it's up to the
distribution maintainers to provide reasonable combinations. In this regard,
the only difference from status quo is that it's much easier to do (and harder
to do incorrectly, for example by forgetting to add a name to one of the
maps).
We used 'combo' type for the scheme list. For a while we forgot to add
new names, and recently aa0a23ec86 added v241, v243, v245, and v247.
I want to allow defining new values during configuration, which means
that we can't use meson to verify the list of options. So any value is
allowed, but then two tests are added: one that will fail compilation if some
invalid name is given (other than "latest"), and one that converts
DEFAULT_NET_NAMING_SCHEME to a NamingScheme pointer.
Firmware likes to draw the EFI provided cursor in a weird way that
makes it invisible sometimes. This is even more likely to happen
if unusual colors are picked. It also fails to draw attention to the
user by being very small and not blinking.
Additionally, to make it more clear that we are in edit mode, we
now default to inverting the general default color and use that for
our line edit.
Fixes: #19301
Add support for systemd-tpm2 based LUKS2 device activation
via libcryptsetup plugin. This make the feature (tpm2 sealed
LUKS2 keyslot passphrase) usable from both systemd utilities
and cryptsetup cli.
The feature is configured via -Dlibcryptsetup-plugins combo
with default value set to 'auto'. It get's enabled automatically
when cryptsetup 2.4.0 or later is installed in build system.
This closes an important gap: so far we would reexecute the system manager and
restart system services that were configured to do so, but we wouldn't do the
same for user managers or user services.
The scheme used for user managers is very similar to the system one, except
that there can be multiple user managers running, so we query the system
manager to get a list of them, and then tell each one to do the equivalent
operations: daemon-reload, disable --now, set-property Markers=+needs-restart,
reload-or-restart --marked.
The total time that can be spend on this is bounded: we execute the commands in
parallel over user managers and units, and additionally set SYSTEMD_BUS_TIMEOUT
to a lower value (15 s by default). User managers should not have too many
units running, and they should be able to do all those operations very
quickly (<< 1s). The final restart operation may take longer, but it's done
asynchronously, so we only wait for the queuing to happen.
The advantage of doing this synchronously is that we can wait for each step to
happen, and for example daemon-reloads can finish before we execute the service
restarts, etc. We can also order various steps wrt. to the phases in the rpm
transaction.
When this was initially proposed, we discussed a more relaxed scheme with bus
property notifications. Such an approach would be more complex because a bunch
of infrastructure would have to be added to system manager to propagate
appropriate notifications to the user managers, and then the user managers
would have to wait for them. Instead, now there is no new code in the managers,
all new functionality is contained in src/rpm/. The ability to call 'systemctl
--user user@' makes this approach very easy. Also, it would be very hard to
order the user manager steps and the rpm transaction steps.
Note: 'systemctl --user disable' is only called for a user managers that are
running. I don't see a nice way around this, and it shouldn't matter too much:
we'll just leave a dangling symlink in the case where the user enabled the
service manually.
A follow-up for https://bugzilla.redhat.com/show_bug.cgi?id=1792468 and
fa97d2fcf6.