IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Systemctl is special because it is required for many tasks that may need to
be performed when the system is not fully configured and/or partially
broken:
1. Installing/Uninstalling services during OS installs and upgrades
2. Shutting down the system
Therefore reduce the number of dependencies that systemctl pulls in, by
not linking to systemd-shared. This brings a bit of resilience to
systemctl (and its aliases shutdown, reboot, etc), by linking against
less external libraries.
Because this extra resilience comes at a cost of approximately 580 KB
extra space, this is done behind a meson build option.
This is in preparation to reusing the RemoteServer in other concepts.
I tried to keep changes to minimum:
- arg_* global variables are now passed as state in RemoteServer
- exported functions get the "journal_remote_" prefix
- some variables are renamed
In particular, there is an ugly global RemoveServer* variable. It was originally
added because µhttpd did not allow state to be passed to the callbacks. I'm not
sure if this has been remediated in µhttpd, but either way, this is not changed
here, the global variable is only renamed for clarity.
This makes it easier to link the nspawn implementation to the tests.
Right now this just means that nspawn-patch-uid.c is not compiled
twice, which is nice, but results in test-patch-uid being slightly bigger,
which is not nice. But in general, we should use convenience libs to
compile everything just once, as far as possible. Otherwise, once we
start compiling a few files here twice, and a few file there thrice, we
soon end up in a state where we are doing hundreds of extra compilations.
So let's do the "right" thing, even if is might not be more efficient.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
In https://github.com/systemd/systemd/pull/6561, `run_target`
was changed to `custom_target`, which inadvertently caused
relative paths to be passed to ctags due to
https://github.com/mesonbuild/meson/issues/3589.
The switch to `run_target` causes absolute paths to be
passed again and makes it easier to jump from file to
file, hopefully delaying the need to exit Vim :-)
Configuration through environment variable is inconvenient with meson, because
they cannot be convieniently changed and/or are not preserved during
reconfiguration (https://github.com/mesonbuild/meson/issues/1503).
This adds -Dvalgrind=true/false, which has the advantage that it can be set
at any time with meson configure -Dvalgrind=... and ninja will rebuild targets
as necessary. Additional minor advantages are better consistency with the
options for hashmap debugging, and typo avoidance with '#if' instead of '#ifdef'.
This means that when those targets are built, all the sources are built again,
instead of reusing the work done to create libbasic.a and other convenience static
libraries. It would be nice to not do this, but there seems to be no support in
our toolchain for joining multiple static libraries into one. When linking
a static library, any -l arguments are simply ignored by ar/gcc-ar, and .a
libraries given as positional arguments are copied verbatim into the archive
so they objects in them cannot be accessed.
https://stackoverflow.com/questions/2157629/linking-static-libraries-to-other-static-libraries
suggests either unzipping all the archives and putting them back togather,
or using a linker script. Unzipping and zipping back together seems ugly.
The other option is not very nice. The linker script language does not
allow "+" to appear in the filenames, and filenames that meson generates
use that, so files would have to be renamed before a linker script was used.
And we would have to generate the linker script on the fly. Either way, this
doesn't seem attractive. Since those static libraries are a niche use case,
it seems reasonable to just go with the easiest and safest solution and
recompile all the source files. Thanks to ccache, this is probably almost as
cheap as actually reusing the convenience .a libraries.
test-libsystemd-sym.c and test-libudev-sym.c compile fine with the generated
static libs, so it seems that they indeed provide all the symbols they should.
This fixes the following warning with clang and meson-0.46.0,
```
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-typedef-redefinition: YES
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-gnu-variable-sized-type-not-at-end: YES
```
Unfortunately this needs a new binary to do the mount because there's just
too many special steps to outsource this to systemd-mount:
- EPERM needs to be treated specially
- UserRuntimeDir= setting must be obeyed
- SELinux label must be adjusted
This allows user@.service to be started independently of logind.
So 'systemctl start user@nnn' will start the user manager for user nnn.
Logind will start it too when the user logs in, and will stop it (unless
lingering is enabled) when the user logs out.
Fixes#7339.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Use `systemctl --user --force exit` to implement the systemd-exit
user service.
This removes our dependence on an external `kill` binary and the
concerns about whether they recognize SIGRTMIN+n by name or what their
interpretation of SIGRTMIN is.
Tested: `systemctl --user start systemd-exit.service` kills the
`systemd --user` instance for my user.
This is analogous to 8d3ae2bd4c, except that now
src/core/umount.c not src/core/mount.c is converted.
Might help with https://bugzilla.redhat.com/show_bug.cgi?id=1554943, or not.
In the patch, mnt_free_tablep and mnt_free_iterp are declared twice. It'd
be nicer to define them just once in mount-setup.h, but then libmount.h would
have to be included there. libmount.h seems to be buggy, and declares some
defines which break other headers, and working around this is more pain than
the two duplicate lines. So let's live with the duplication for now.
This fixes memleak of MountPoint in mount_points_list_get() on error, not that
it matters any.
We currently have just one sanitizer for tests, asan, but we may add more in
the future. So let's keep the loop over the sanitizers in meson.build, but
just enable all regression cases under all sanitizers. If it fails under one
of them, it might fail under a different one.
In subsequent commits I'll add test cases which might not fail under asan,
but it's good to commit them for future use.
The test names are made more verbose:
256/257 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
257/257 fuzz-dns-packet:issue-7888:address OK 0.03 s
meson.build:2907: WARNING: Trying to compare values of different types (bool, str) using ==.
The result of this is undefined and will become a hard error in a future Meson release.
This turns resolve-tool into a multi-call binary. When invoked as
"resolvconf" it provides minimal compatibility with the resolvconf(8)
tool of various distributions (and FreeBSD as it appears).
This new interface understands to varying degrees features of the two
major implementations of resolvconf(8): Debian's original one and
"openresolv". Specifically:
Fully supported:
-a -d (supported by all implementations)
-f (introduced by openresolv)
Somewhat supported:
-x (introduced by openresolv, mapped to a '~.' domain entry)
Unsupported and ignored:
-m -p (introduced by openresolv, not really necessary for us)
Unsupported and resulting in failure:
-u (supported by all other implementations)
-I -i -l -R -r -v -V
(all introduced by openresolv)
--enable-updates --disable-updates --updates-are-enabled
(specific to Debian's implementation)
Of course, resolvconf(8) is a tool with multiple backends, in our
implementation systemd-resolved is the only backend.
Fixes: #7202
Follow-up for ba7f4ae617.
By default, we detect if the real root has a separate /usr/sbin directory, but
this can be overrides with -Dsplit-bin=true|false. The check assumes that
/usr/sbin is split if it is not a symlink, so it'll return a false negative
with some more complicated setups. But that's OK, in those cases this should be
configured explicitly.
This will copy the structure of the directories in the root file system to
$DESTDIR. If a directory is a directory in $DESTDIR but a symlink in the root
file system, this script will fail. This means that it's not possible to reuse
a $DESTDIR from between ba7f4ae61 and this patch.
I figure sooneror later we'll have more of these docs, hence let's give
them a clean place to be.
This leaves NEWS and README/README.md as well as the LICENSE texts in
the root directory of the project since that appears to be customary for
Free Software projects.
There isn't much difference, but in general we prefer to use the standard
functions. glibc provides reallocarray since version 2.26.
I moved explicit_bzero is configure test to the bottom, so that the two stdlib
functions are at the bottom.
The Linux kernel exposes the birth time now for files through statx()
hence make use of it where available. We keep the xattr logic in place
for this however, since only a subset of file systems on Linux currently
expose the birth time. NFS and tmpfs for example do not support it. OTOH
there are other file systems that do support the birth time but might
not support xattrs (smb…), hence make the best of the two, in particular
in order to deal with journal files copied between file system types and
to maintain compatibility with older file systems that are updated to
newer version of the file system.
Apply defaults for system_{uid,gid}_max even if the /etc/login.defs file
doesn't exist (e.g. in Clear Linux with no changes).
awk returns an empty string in case the file doesn't exist, causing meson to
fail in to_int(). So set the default if output is empty. This makes the BEGIN{}
blocks unnecessary, so remove them.
The single quote working with multiple lines is likely to be unintended. With
current versions of meson, it also causes error messages after it to report the
wrong line number. Use the documented syntax instead.
I used 'tags' before because this way we avoided a unnecessary
line about 'env' detection. But we cannot use 'env' in test(), so
previous commit added 'env' detection. We might just as well use
it in custom_target().
This is a bit painful because a separate build of systemd is necessary. The
tests are guarded by tests!=false and slow-tests==true. Running them is not
slow, but compilation certainly is. If this proves unwieldy, we can add a
separate option controlling those builds later.
The build for each sanitizer has its own directory, and we build all fuzzer
tests there, and then pull them out one-by-one by linking into the target
position as necessary. It would be nicer to just build the desired fuzzer, but
we need to build the whole nested build as one unit.
[I also tried making systemd and nested meson subproject. This would work
nicely, but meson does not allow that because the nested target names are the
same as the outer project names. If that is ever fixed, that would be the way
to go.]
v2:
- make sure things still work if memory sanitizer is not available
v3:
- switch to syntax which works with meson 0.42.1 found in Ubuntu
Add a new -Dllvm-fuzz=true option that can be used to build against
libFuzzer and update the oss-fuzz script to work outside of the
oss-fuzz build environment.
The fuzz targets are intended to be fast and only target systemd
code, so they don't need to call out to any dependencies. They also
shouldn't depend on shared libraries outside of libc, so we disable
every dependency when compiling against oss-fuzz. This also
simplifies the upstream build environment significantly.
The fuzzers will be used by oss-fuzz to automatically and
continuously fuzz systemd.
This commit includes the build tooling necessary to build fuzz
targets, and a fuzzer for the DNS packet parser.
Currently there is no way to prevent tests from building using meson.
This introduces two problems:
1) It adds a extra 381 files to compile.
2) One of these tests explicitly requires libgcrypt to be built even if systemd
is not using it.
3) It adds C++ to the requirements to build systemd.
When cross-compiling, this is uneccessary.
On a typical system running systemd, the telinit in PATH is very likely to be a symlink
to systemctl. Setting TELINIT to this may result in an infinite recursion if telinit is called
and sd_booted() == 0. This may commonly occur in a chroot environment.
Bug: https://bugs.gentoo.org/642724
[zj:
The path was originally hardcoded as "/lib/upstart/telinit", but was made configurable without
changing the default in 4ad61fd180. Then the default was
changed to `/lib/sysvinit/telinit` in abaaabf40a. Then it
started being autodetected when meson support was added in
5c23128dab. This patch restores the behaviour that was
implemented in configure.ac at the time of its removal.]
This reduces the man=false meson target count from 1281 to 1253.
--
A fully scientific test:
git grep _sources, :/*.build|cut -d: -f2|tr -d ' '|sort|uniq -c
reveals that libudev_sources is the only source list now reused twice. There's
some ugly circular dependency between libudev and libshared, and anyway I'm not
sure if we don't want to use different compilation options (LOG_REALM_…) in
those two cases, so I'm leaving that alone for now.
This reduces the meson man=false target count to 1281.
v2:
- link test-engine with libshared instead of libsystemd_static
Previous version built fine on F27, but fails on F26 with the following error:
/usr/bin/ld: /tmp/ccr8HRGw.ltrans6.ltrans.o: undefined reference to symbol '__start_BUS_ERROR_MAP@@SD_SHARED'
/home/zbyszek/fedora/systemd/systemd-9d5aae75c64f5583a110f03b94816aacc03bbf4d/x86_64-redhat-linux-gnu/src/shared/libsystemd-shared-236.so: error adding symbols: DSO missing from command line
v3:
- add libudev_basic
Instead of compiling those files twice, once for libsystemd and once for
libshared, compile once as a static archive and then link into both.
This reduce the meson target for man=no compile to 1291.
We were including gcrypt-util.[ch] by hand in the few places where it
was used. Create a convenience library to avoid compiling the same
files multiple times.
v2:
- use a separate static library instead of mergin into libbasic
gcrypt_util_sources had to be moved because otherwise they appeared twice
in libshared.so halfproducts, causing an error.
-fvisibility=default is added to libbasic, libshared_static so that the symbols
appear properly in the exported symbol list in libshared.
The advantage is that files are not compiled twice. When configured with -Dman=false,
the ninja target list is reduced from 1588 to 1347 targets. The difference in compilation
time is small (<10%). I think this is because of -O0 and ccache and multiple cores, and
in different settings the compilation time could be reduced. The main advantage is that
errors and warnings are not reported twice.
We of course don't know in which header glibc will export pivot_root()
and if it ever will. But there's a good chance they'll place it where
chroot() is located, given the similarity in the operations, hence let's
try our luck and look for it at the same place.
If we are lucky this means we don't have to patch our code if glibc
decides to expose the call one day.
This reworks how we set _GNU_SOURCE when checking for the availability
of functions:
1. We set it for most of the functions we look for. After all we set it
for our entire built anyway, and it's usually how Linux-specific
definitions in glibc are protected these days. Given that we usually
have checks for such modern stuff only anyway, let's just blanket enable
it.
2. Use "args" instead of "prefix" to set the macro. This is what is
suggested in the meson docs, hence let's do it.
Follow-up for bad7a0c81f501fbbcc79af9eaa4b8254441c4a1f of git
repository for glibc.
Recently glibc added `copy_file_range()`, but to use it,
`_GNU_SOURCE` needs to be defined. This adds the flag in
meson.build to detect the function by meson correctly.
This gets rid of recompilation, making things faster and avoids duplicated warnings.
The result seems to be the same:
$ ls -l build/libsystemd.so.0.20.0 build2/libsystemd.so.0.20.0
-rwxrwxr-x. 1 zbyszek zbyszek 3071312 Dec 19 11:45 build2/libsystemd.so.0.20.0
-rwxrwxr-x. 1 zbyszek zbyszek 3071760 Dec 19 11:11 build/libsystemd.so.0.20.0
$ diff -U1 <(objdump -T build/libsystemd.so.0.20.0|sed -r 's/[0-9a-f]{16}/________________/g') <(objdump -T build2/libsystemd.so.0.20.0|sed -r 's/[0-9a-f]{16}/________________/g')
-build/libsystemd.so.0.20.0: file format elf64-x86-64
+build2/libsystemd.so.0.20.0: file format elf64-x86-64
We already use the "_static" suffix for libshared_static ("shared" is the name
of the library, "static" is the format) and other libs, so let's rename for
consistency.
Also change libsystemd_static_sources to libsystemd_sources, since the same
list is used for both and shorter is better.
Otherwise, setting udev_log=debug in /etc/udev/udev.conf has no effects since
systemd-udevd is built with LOG_REALM=LOG_REALM_UDEV.
However using LOG_REALM_UDEV (for libudev_core) reveals another similar bug for
udevadm which should also define LOG_REALM_UDEV.
We might end up allocating mempools, and when we are unloaded we might
orphan them, thus leaking them. Hence, let's just stick around for good,
so the mempools remain referenced continously and for good, and thus no
memory is leaked (though the memory isn't cleaned up either).
Fixes: #7596
I want to add presets/user/ later. This mirrors the layout for units:
we have units/ and units/user. The advantage is that we avoid having yet
another directory at the top level.
To allow better integration with distributions requiring an explicitly
set gid for the `users` group, provide the new `-Dusers-gid` option to
set to a new numeric value.
In the absence of a specified gid, we'll fallback to the default existing
behaviour of `-` as the gid value, to automatically assign the next available
gid on the system.
In this way, individual errors in files can be treated differently than a
failure of the whole service.
A test is added to check that the expected value is returned.
Some parts are commented out, because it is not. This will be fixed in
a subsequent commit.
I opted to completely generate a unit for both mount points and swaps. For
swaps, it would be possible to use fixed template unit like systemd-mkswap@.service,
because there's no information passed except the device name. For mount points,
that's not possible because both the device name and file system type need to
be passed. Nevertheless, I expect that options will need to passed to both mkfs
and mkswap, in which case it'll be necessary to create units of both types
anyway.
Similar to the virtual ethernet driver veth, vxcan implements a
local CAN traffic tunnel between two virtual CAN network devices.
When creating a vxcan, two vxcan devices are created as pair
When one end receives the packet it appears on its pair and vice
versa. The vxcan can be used for cross namespace communication.
At some point before gcc-7 was released, -Wimplicit-fallthrough=3 was included
in -Wextra. The documentation for gcc-7.2.1-2.fc27.x86_64 still says that, but
empirical testing shows that it's not. The documentation also misstates that
-Wimplicit-fallthrough is equivalent to -Wimplicit-fallthrough=3.
Let's add -Wimplicit-fallthrough=3 explicitly to get the warnings if we regress.
Prompted by #7389.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
- Remove the uaccess tag from /dev/dri/renderD*.
- Change the owning group from video to render.
- Change default mode to 0666.
- Add an option to allow users to set the access mode for these devices at
compile time.
kmod upstream uses /lib/modprobe.d which means we need to use rootprefix
instead of prefix for installing the modprobe configuration file as
otherwise split-usr systems are broken.
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879191
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
This is a legacy of autotools, where one detection routine used a different
prefix then the others.
$ git grep -e HAVE_DECL_ -l|xargs sed -i s/HAVE_DECL_/HAVE_/g
Fixes#4871.
The new libmount has two changes relevant for us:
- x-* options are propagated to /run/mount/utab and are visible through
libmount (fixes#4817).
- umount -c now really works (partially solves #6115).
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
Seems to be some kind of confusion in gcc. Insteading of playing whack-a-mole and
adding work-arounds in code, let's adjust the compilation options instead.
Fixes#6119, replaces #6657.
some run_target() calls were using params from custom_target()
example message:
WARNING: Passed invalid keyword argument "input". This will become a hard error in the future.
New way to call targets:
ninja man/man
ninja man/html
ninja man/update-man-rules
This changes the symbolic name for the default gateway from "gateway" to
"_gateway". A new configuration option -Dcompat-gateway-hostname=true|false
is added. If it is set, the old name is also supported, but the new name
is used as the canonical name in either case. This is intended as a temporary
measure to make the transition easier, and the option should be removed
after a few releases, at which point only the new name will be used.
The old "gateway" name mostly works OK, but hasn't gained widespread acceptance
because of the following (potential) conflicts:
- it is completely legal to have a host called "gateway"
- there is no guarantee that "gateway" will not be registered as a TLD, even
though this currently seems unlikely. (Even then, there would be no
conflict except for the case when the top-level domain itself was being resolved.
The "gateway" or "_gateway" labels have only special meaning when the
whole name consists of a single label, so resolution of any subdomain
of the hypothetical gateway. TLD would still work OK. )
Moving to "_gateway" avoids those issues because underscores are not allowed
in host names (RFC 1123, §2.1) and avoids potential conflicts with local or
global names.
v2:
- simplify the logic to hardcode "_gateway" and allow
-Dcompat-gateway-hostname=true as a temporary measure.
This was done autogen.sh previously and was dropped in
72cdb3e783. Let's add it back.
The meson configuration step is the only reasonable place.
Note that this only works for the most standard git dirs, e.g.
the hook will not be installed if git worktree is used or if
$GIT_DIR is specified, etc. I think that's OK because most of
the time meson will be run at least once in the original cloned
dir.
This makes it more like other configure defines.
Also, it fixes meson status output which was looking for HAVE_ and ENABLE_
prefixes only (the define under meson was OK, just the summary message was
wrong.)
This is just the meson part, no functional change.
Use meson -D slow-tests=yes to set the default,
or SYSTEMD_SLOW_TESTS=yes build/test-foobar for just one test.
Setting the default is more useful for installed tests.
This is a squash of casync commits
02fbbdb2b9
(by Silvio Fricke)
and b687a94b1e.
Instead of checking during every meson config whether etags are
available, just try to call them and error out if not. This has
the advantage that the target is always available (if git is installed),
and the error message gives a hint what needs to be installed.
The naming is confusing, but etags(1) is pretty clear:
- emacs expects TAGS file in etags format
- vi expects tags file in ctags format
and automake docs are pretty clear too:
- tags target generates TAGS file
- ctags target generates tags file
If wanted, the linker can be set with LDFLAGS (LDFLAGS=-Wl,-fuse-ld=gold meson ...),
and setting it internally was interfering with that. It seems that both gold and
bfd work very well and quick, and the reasons we had to prefer gold are not relevant
anymore.
Fixes#6169.
Always install all tests if install-tests is set to true, as they might
be useful for CI. This includes manual and unsafe tests. Install those
in subdirectories of /usr/lib/systemd/tests.
Fixes#6163.
Three binaries would fail to link when ld.bfd was used and link-udev-shared was
false. Add -pthreads (again) to the failing binaries and synchronize the
dependency list between libsystemd-shared .a and .so versions.
Apart from allowing the build to succeed, this shouldn't have much effect becuase
systemd-networkd was already using pthreads.
Fixes#5828.
The TAGS file was generated in build/ following what autotools did.
Nevertheless, it's more convenient to put in the source dir.
(It doesn't get deleted by mistake, and it's easier to find for the
editor.)
This test is mostly a compilation test that checks that various defines in
sd-bus-vtable.h are valid C++. The code is executed, but the results are not
checked (apart from sd-bus functions not returning an error). test-bus-objects
contains pretty extensive tests for this functionality.
The C++ version is only added to meson, since it's simpler there.
Because of the .cc extension, meson will compile the executable with c++.
This test is necessary to properly check the macros in sd-bus-vtable.h. Just
running the headers through g++ is not enough, because the macros are not
exercised.
Follow-up for #5941.
If we could not communicate with systemd-resolved, we would call into
libnss_dns. libnss_dns would return NOTFOUND for stuff like "localhost" and
other names resolved by nss-myhostname, which we would fall under the !UNAVAIL=
condition and cause resolution to fail. So the following recommended
configuration in nsswitch.conf would not work:
hosts: resolve [!UNAVAIL=return] dns myhostname
Remove the internal fallback code completely so that the fallback logic
can be configured in nsswitch.conf.
Tested with
hosts: resolve [!UNAVAIL=return] myhostname
and
hosts: resolve [!UNAVAIL=return] dns myhostname
Fixes#5742.
libidn2 2.0.0 supports IDNA2008, in contrast to libidn which supports IDNA2003.
https://bugzilla.redhat.com/show_bug.cgi?id=1449145
From that bug report:
Internationalized domain names exist for quite some time (IDNA2003), although
the protocols describing them have evolved in an incompatible way (IDNA2008).
These incompatibilities will prevent applications written for IDNA2003 to
access certain problematic domain names defined with IDNA2008, e.g., faß.de is
translated to domain xn--fa-hia.de with IDNA2008, while in IDNA2003 it is
translated to fass.de domain. That not only causes incompatibility problems,
but may be used as an attack vector to redirect users to different web sites.
v2:
- keep libidn support
- require libidn2 >= 2.0.0
v3:
- keep dns_name_apply_idna caller dumb, and keep the #ifdefs inside of the
function.
- use both ±IDN and ±IDN2 in the version string
Some distros (openSUSE) don't have group shadow support enabled. This can lead
to the following error:
# systemd-sysusers
Creating group foofoo with gid 478.
# systemd-sysusers
# groupdel foofoo
# systemd-sysusers
Creating group foofoo with gid 478.
Failed to write files: File exists
This patch adds --disable-gshadow option to configure. If used,
systemd-sysvusers won't consider /etc/gshadow.
Any call to set/query/use the log level in the code with LOG_REALM=LOG_REALM_UDEV
refers to log_max_level[1]. In particular this means that systemd code using
the libudev library uses does not set the log level for log calls done in libudev.
Fixes#4525.
v2:
- also update meson's meson.build
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
This is similar to what ./configure prints. Instead of a long list of yes/no lines,
I added two lines at the end with "enabled features" and "disabled features".
This is what the mplayer/mencoder ./configure script did back in the day.
The advantage is that it's easy to look at the list of disabled features
and check for any unexpected entries.
```
[107/1793] Compiling c object 'src/basic/basic@sta/log.c.o'
In file included from ../src/basic/log.c:44:0:
../src/basic/missing.h:762:6: warning: "HAVE_DECL_IFLA_GENEVE_LABEL" is not defined, evaluates to 0 [-Wundef]
^~~~~~~~~~~~~~~~~~~~~~~~~~~
[108/1793] Compiling c object 'src/basic/basic@sta/path-util.c.o'
In file included from ../src/basic/path-util.c:40:0:
../src/basic/missing.h:762:6: warning: "HAVE_DECL_IFLA_GENEVE_LABEL" is not defined, evaluates to 0 [-Wundef]
^~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Previous checks did nothing, because cc.has_argument only does compilation,
without any linking. Unfortunately cc.links() cannot be used, because it does
not accept any options. Providing the test file as a static source is easiest,
even if not every elegant.
https://github.com/mesonbuild/meson/issues/1676
Various distros split udev and its helpers into a separate binary
package. In case of Debian this also includes systemd-hwdb.
In Debian, the udev package is not supposed to depend on systemd, so a
dependency on libsystemd-shared.so is not desired. Allow the
systemd-hwdb binary to be linked statically if link-udev-shared is set
to false.
Follow-up for 3a30f21ff8.
Also detect libgpg-error. Require both to be present for HAVE_CRYPT,
even though libgpg-error is only used in src/resolve. If one is available,
the other should be too, so it doesn't seem worth the trouble to make two
separate conditions.
This fixes ldsdir detection under Debian.
v2:
- define gnu_efi_arch for the arch efi include directory name
In the autotools naming convention, efi_arch and this directory always had
the same name. But meson.cpu_family() uses a slightly different convention,
so those two don't always match.
I used strings.h because that's what explicit_bzero(3) says. But glibc defines
it in string.h. There are no other available implementations atm (musl does not
define it, bionic aliases it to memset in openbsd-compat.h, yikes). We also
include just string.h from the code. So just look for the function in string.h,
and if it ever appears in other places, we can change the detection and includes.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This makes the helper binaries significantly bigger (in some cases, the final
size depends on link options and optimization level), and is only useful for
distributions which want to provide the option to install udev without systemd.
As the linking is improved, the difference between the columns might shrink,
but it's unlikely that linking libshared statically could ever be more
efficient.
E.g. with -O0, no -flto:
(static) (shared)
src/udev/ata_id 999176 85696
src/udev/cdrom_id 1024344 111656
src/udev/collect 990344 81280
src/udev/scsi_id 1023592 115656
src/udev/v4l_id 811736 17744
When linked dynamically, install_rpath must be specified, so add that.
This allow test-efi-disk.img to be created under meson.
The invocation of qemu is not converted yet, in particular because the
command-line used in Makefile.am is outdated.
This is more-or-less the same as dist-check-includes. meson doesn't exactly
make it easy to call a compiler with a custom set of options. The tests
are included in the test listing.
test-dlopen is a very simple binary that is only linked with libc and
libdl. From it we do dlopen() on the nss and pam modules to check that they are
linked to all necessary libs.
(meson-compiled nss modules are linked to less libraries, for whatever reason.
I suspected that some deps are missing, but it turns out that my suspicions
weren't justified, and the modules load just fine. Let's keep the test though,
it is very quick, and might detect missing linkage in the future.)
This simplifies things and leads to a smaller installation footprint.
libsystemd_internal and libsystemd_journal_internal are linked into
libystemd-shared and available to all programs linked to libsystemd-shared.
libsystemd_journal_internal is not needed anymore, and libsystemd-shared
is used everwhere. The few exceptions are: libsystemd.so, test-engine,
test-bus-error, and various loadable modules.
This doesn't feel as natural, but is more consistent with the boolean options
which require true/false, and allows setting of options without knowing of
which type the option is.
This is a very straightforward conversion of the rules in Makefile.am.
Generated objects (on arm64) are identical.
The only difference in executed commands is that automake uses ld -m
elf_x86_64, without us specifying the -m option anywhere. I suspect that
using the default for the given linker should be OK, so it's fine to just
skip it.
The tests are included under the conditional too, instead of specifying
'ENABLE_NETWORKD' in the test definition array, because libnetworkd_core
dependency is undefined if networkd is disabled.
This implementation assumes that the arguments in compiler.cmd_array()
don't contain any spaces. Since we are only interested in compilation
on Linux, I think this is a safe assumption.
Solution suggested by Nirbheek Chauhan.
(i.e. pretty much all of them). libtools does this automatically for us. It
would be great if meson did too. Otherwise, it would be nice to simply attach
the information about necessary rpath to the library object, and have it used
automatically for all users. Dunno, maybe there's already a way to do this.
I used '$ORIGIN' for stuff installed into libexecdir, since that's where
libshared ends up, and a full path for everything else. The advantage of
using $ORIGIN is that those binaries can be started from $DESTDIR, which can
sometimes be useful.
I tried to link to the right library by hand, because without
mesonbuid/meson#1545, libbasic.a is added to the link arguments. We want to
link the test with nothing but the library being tested. Doing the linking by
hand did achieve that, but it caused a bigger issue: meson didn't know about
the dependency on the library. And the dependency cannot be added using
link_depends, because "link_depends arguments must be strings...", and this
does not work with a compilation target. So just link in the usual way and
accept the overlinking (for now).
With mesonbuid/meson#1545, meson does not propagate deps of a library
when linking with that library. That's of course the right thing to do,
but it exposes a bunch of missing deps.
This compiles with both meson-0.39.1 and meson-git + pr/1545.
This is slightly complicated by the fact that files('libudev.h') cannot be used
as an argument in custom_target command (string is required). This restriction
should be lifted in future versions of mesons, so this could be simplified.
This is quite messy. I think libtool might have been using something
like -Wl,--whole-archive, but I don't think meson has support for that.
For now, just recompile all the sources for linking into libsystemd
directly. This should not matter much for efficiency, since it's a
few small files.
This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook.
I did not bother to create the directories into which we install files,
since they will be created anyway.
v2:
- remove bashism
This is what autoconf-based build does, and it makes test-bus-error and
test-engine able to access the bus error mapping table. OTOH, this is a heavy
price to pay: it would be excellent to link libcore.a to libsystemd-shared-NNN.so.
Otherwise we duplicate the same code in 'systemd' and 'libsystemd-shared-NNN.so'.
-rwxrwxr-x. 1 4075544 Apr 6 20:30 systemd* <-- libcore linked against libsystemd-shared.so
-rwxrwxr-x. 1 5596504 Apr 9 14:07 systemd* <-- libcore linked against libsystemd-shared.a
v2:
- update for 6b5cf3ea62
This is pretty ugly, because I don't know how to use a single
definition for two purposes:
- --version-script needs a path relative to the build root
- link_depends needs a path relative to source root
Also, link_depends does not accept files() output
[https://github.com/mesonbuild/meson/issues/1172], and I don't see a way to go
from files() output to a string path that can be used to craft the -Wl arg.
Ideally, a single files() result could be used in both places.
I'm leaving this as a separate commit for now.
Instead of a separate target as with make, it is decided at configure time
whether to install tests as part of the install target. The effect should be
the same.
Tests can be run with 'ninja-build test' or using 'mesontest'.
'-Dtests=unsafe' can be used to include the "unsafe" tests in the
test suite, same as with autotools.
v2:
- use more conf.get guards are optional components
- declare deps on generated headers for test-{af,arphrd,cap}-list
v3:
- define environment for tests
Most test don't need this, but to be consistent with autotools-based build, and
to avoid questions which tests need it and which don't, set the same environment
for all tests.
v4:
- rework test generation
Use a list of lists to define each test. This way we can reduce the
boilerplate somewhat, although the test listings are still pretty verbose. We
can also move the definitions of the tests to the subdirs. Unfortunately some
subdirs are included earlier than some of the libraries that test binaries
are linked to. So just dump all definitions of all tests that cannot be
defined earlier into src/test. The `executable` definitions are still at the
top level, so the binaries are compiled into the build root.
v5:
- tag test-dnssec-complex as manual
v6:
- fix HAVE_LIBZ typo
- add missing libgobject/libgio defs
- mark test-qcow2 as manual
Quite necessary for all the emacs users out there ;)
v2:
- fix error with etags or git are not found
v3:
- move the definition of git and etags up so it's available for man/
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
