IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds a new "PollLimit" pair of settings to .socket units, very
similar to existing "TriggerLimit" logic. The differences are:
* PollLimit focusses on the polling on the sockets, and pauses that
temporarily if a ratelimit on that is reached. TriggerLimit otoh
focusses on the triggering effect of socket units, and stops
triggering once the ratelimit is hit.
* While the trigger limit being hit is an action that causes the socket
unit to fail the polling limit being reached will just temporarily
disable polling on the socket fd, and it is resumed once the ratelimit
interval is over.
* When a socket unit operates on multiple socket fds (e,g, ListenStream=
on both some ipv6 and an ipv4 address or so). Then the PollLimit will
be specific to each fd, while the trigger limit is specific to the
whole unit.
Implementation-wise this is mostly a wrapper around sd-event's
sd_event_source_set_ratelimit(), which exposes the desired behaviour
directly.
Usecase for all of this: socket services which when overloaded with
connections should just slow down reception of it, but not fail
persistently.
This tries to add information about when each option was added. It goes
back to version 183.
The version info is included from a separate file to allow generating it,
which would allow more control on the formatting of the final output.
As it says on the tin, configures the unit to survive a soft reboot.
Currently all the following options have to be set by hand:
Conflicts=reboot.target kexec.target poweroff.target halt.target
Before=reboot.target kexec.target poweroff.target halt.target
After=sysinit.target basic.target
DefaultDependencies=no
IgnoreOnIsolate=yes
This is not very user friendly. If new default dependencies are added,
or new shutdown/reboot types, they also have to be added manually.
The new option is much simpler, easy to find, and does the right thing
by default.
When this option is set to direct, the service restarts without entering a failed
state. Dependent units are not notified of transitory failure.
This is useful for the following use case:
We have a target with Requires=my-service, After=my-service.
my-service.service is a oneshot service and has Restart=on-failure in
its definition.
my-service.service can get stuck for various reasons and time out, in
which case it is restarted. Currently, when it fails the first time, the
target fails, even though my-service is restarted.
The behavior we're looking for is that until my-service is not restarted
anymore, the target stays pending waiting for my-service.service to
start successfully or fail without being restarted anymore.
This property reports whether the system is running inside a confidential
virtual machine.
Related: https://github.com/systemd/systemd/issues/27604
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This setting allows services to run in an ephemeral copy of the root
directory or root image. To make sure the ephemeral copies are always
cleaned up, we add a tmpfiles snippet to unconditionally clean up
/var/lib/systemd/ephemeral. To prevent in use ephemeral copies from
being cleaned up by tmpfiles, we use the newly added COPY_LOCK_BSD
and BTRFS_SNAPSHOT_LOCK_BSD flags to take a BSD lock on the ephemeral
copies which instruct tmpfiles to not touch those ephemeral copies as
long as the BSD lock is held.
Doesn't really matter since the two unicode symbols are supposedly
equivalent, but let's better follow the unicode recommendations to
prefer greek small letter mu, as per:
https://www.unicode.org/reports/tr25
ImportCredential= takes a credential name and searches for a matching
credential in all the credential stores we know about it. It supports
globs which are expanded so that all matching credentials are loaded.
This adds support for KSM (kernel samepage merging). It adds a new
boolean parameter called MemoryKSM to enable the feature. The feature
can only be enabled with newer kernels.
Dump*() methods can take quite some time due to the amount of data to
serialize, so they can potentially stall the manager. Make them
privileged, as they are debugging tools anyway. Use a new 'dump'
capability for polkit, and the 'reload' capability for SELinux, as
that's also non-destructive but slow.
If the caller is not privileged, allow it but rate limited to 10 calls
every 10 minutes.
This implements a minimal subset of #24961, but in a lot more
restrictive way: we only allow one level of subcgroup (as that's enough
to address the no-processes in inner cgroups rule), and does not change
anything about threaded cgroup logic or similar, or make any of this new
behaviour mandatory.
All this does is this: all non-control processes we invoke for a unit
we'll invoke in a subgroup by the specified name.
We'll later port all our current services that use cgroup delegation
over to this, i.e. user@.service, systemd-nspawn@.service and
systemd-udevd.service.
Oftentimes it is useful to allow the per-service fd store to survive
longer than for a restart. This is useful in various scenarios:
1. An fd to some security relevant object needs to be stashed somewhere,
that should not be cleaned automatically, because the security
enforcement would be dropped then.
2. A user namespace fd should be allocated on first invocation and be
kept around until the user logs out (i.e. systemd --user ends), á la
#16328 (This does not implement what #16318 asks for, but should
solve the use-case discussed there.)
3. There's interest in allow a concept of "userspace reboots" where the
kernel stays running, and userspace is swapped out (i.e. all services
exit, and the rootfs transitioned into a new version of it) while
keeping some select resources pinned, very similar to how we
implement a switch root. Thus it is useful to allow services to exit,
while leaving their fds around till the very end.
This is exposed through a new FileDescriptorStorePreserve= setting that
is closely modelled after RuntimeDirectoryPreserve= (in fact it reused
the same internal type), since we want similar behaviour in the end, and
quite often they probably want to be used together.
This is a followup to
413e8650b7
> tree-wide: Use "unmet" for condition checks, not "failed"
Since I noticed when running `systemctl status` on a recent
systemd still seeing
`Condition: start condition failed`
To recap the original rationale here for "unmet" is that it's
normal for some units to be conditional, so the term "failure"
here is too strong.
Follow-up for #26902 and #26971
Let's always calculate the next restart interval
since that's more useful.
For that, we add 1 to s->n_restarts unconditionally,
and change RestartUSecCurrent property to RestartUSecNext.
interval between restarts
RestartSteps= accepts a positive integer as the number of steps
to take to increase the interval between auto-restarts from
RestartSec= to RestartSecMax=, or 0 to disable it.
Closes#6129
This augments the existing KillUnit() + Kill() methods with
QueueSignalUnit() + QueueSignal(), which are what sigqueue() is to
kill().
This is useful for sending our new SIGRTMIN+18 control signals to system
services.
A pid can be recycled, but a pidfd is pinned. Add a new method that is safer
as it takes a pidfd as input.
Return not only the D-Bus object path, but also the unit id and the last
recorded invocation id, as they are both useful (especially the id, as
converting from a path object to a unit id from a script requires another
round-trip via D-Bus).
Note that the manager still tracks processes by pid, so theorethically this
is not fully error-proof, but on the other hand the method response is
synchronous and the manager is single-threaded, so once a call is being
processed the unit database will not change anyway. Once the manager
switches to use pidfds everywhere, this can be further hardened.
Define new unit parameter (LogFilterPatterns) to filter logs processed by
journald.
This option is used to store a regular expression which is carried from
PID1 to systemd-journald through a cgroup xattrs:
`user.journald_log_filter_patterns`.
Trying to disable a unit with no install info is mostly useless, so
adding a warning like we do for enable (with the new dbus method
'DisableUnitFilesWithFlagsAndInstallInfo()'). Note that it would
still find and remove symlinks to the unit in /etc, regardless of
whether it has install info or not, just like before. And if there are
actually files to remove, we suppress the warning.
Fixes#17689
The new function DumpPatterns() can be used to limit (drastically) the size of
the data returned by PID1. Hence the optimization of serializing data into a
file descriptor should be less relevant than having the possibility to limit
the data when communicating with the service manager remotely.
NB: when passing patterns, the dump command omits the version of the manager as
well as the features and the timestamps.
