IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This commit adds support for loading, measuring and handling a ".ucode"
UKI section. This section is functionally an initrd, intended for
microcode updates. As such it will always be passed to the kernel first.
This does what we do for system extension also for configuration
extension.
This is complicated by the fact that we previously looked for
<uki-binary>.d/*.raw for system extensions. We want to measure sysexts
and confexts to different PCRs (13 vs. 12) hence we must distinguish
them, but *.raw would match both kinds.
This commit solves this via the following mechanism: we'll load confexts
from *.confext.raw and sysexts from *.raw but will then enclude
*.confext.raw from the latter. This preserves compatibility but allows
us to somewhat reasonable distinguish both types of images.
The documentation is updated not going into this detail though, and
instead now claims that sysexts shall be *.sysext.raw and confexts
*.confext.raw even though we actually are more lenient than this. This
is simply to push people towards using the longer, more descriptive
suffixes.
I added an XML comment (<!-- … -->) about this to the docs, so that
whenever somebody notices the difference between code and docs
understands why and leaves it that way.
With <para><filename>…</filename></para>, we get a separate "paragraph" for
each line, i.e. entries separated by empty lines. This uses up a lot of space
and was only done because docbook makes it hard to insert a newline. In some
other places, <literallayout> was used, but then we cannot indent the source
text (because the whitespace would end up in the final page). We can get the
desired result with <simplelist>.
With <simplelist> the items are indented in roff output, but not in html
output. In some places this looks better then no indentation, and in others it
would probably be better to have no indent. But this is a minor issue and we
cannot control that.
(I didn't convert all spots. There's a bunch of other man pages which have two
lines, e.g. an executable and service file, and it doesn't matter there so
much.)
Let's put the section name at the beginning of each sentence. This way we
can avoid awkward constructs like "kernel is looked for in the .linux section".
Also, since the paragraph above says that this is a list of "PE sections", we
can just say "section". In other places, it is often useful to say "PE section"
to avoid ambiguity.
Also fix the off-by-one in the count of sections.
If `foo+3-0.efi` is booted when there are some files in `foo.efi.extra.d`,
those files are ignored. But after the boot is blessed and the system rebooted,
those file are taken into account, and the boot is different from first
boot. This behavior is a bit puzzling.
Instead we now ignore the counter and always look for the extra files in
`foo.efi.extra.d` and always boot the same way.
This fixes the PE section documentation in the systemd-stub man page:
for some reason .uname was listed twice, and .sbat was still missing.
Address that.
Also, let's reorder things to to match the "canonical" ordering we also
use for measurement in sd-stub. The order makes sense and there's really
no reason to depart from that here.
Minor other tweaks.
Reverts b6f2e68602, among other things
This tries to add information about when each option was added. It goes
back to version 183.
The version info is included from a separate file to allow generating it,
which would allow more control on the formatting of the final output.
Files placed in /EFI/Linux/UKI.efi.extra.d/ and /loader/addons/ are
opened and verified using the LoadImage protocol, and will thus get
verified via shim/firmware.
If they are valid signed PE files, the .cmdline section will be
extracted and appended. If there are multiple addons in each directory,
they will be parsed in alphanumerical order.
Optionally the .uname sections are also matched if present, so
that they can be used to filter out addons as well if needed, and only
addons that correspond exactly to the UKI being loaded are used.
It is recommended to also always add a .sbat section to addons, so
that they can be mass-revoked with just a policy update.
The files must have a .addon.efi suffix.
Files in the per-UKI directory are parsed, sorted, measured and
appended first. Then, files in the generic directory are processed.
PCR1, where SMBIOS strings are measured, is filled with data that is not
under the control of the machine owner. Measure cmdline extensions in
PCR12 too, where we measure other optional addons that are loaded by
sd-stub.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
Let's read more kernel command line arguments from SMBIOS OEM string
io.systemd.stub.kernel-cmdline-extra. This allows adding debug kernel
command line arguments when booting in qemy without having to modify
the UKI.
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
We support PCR measurements for both classic TPM1.2 and TPM2, hence just
say "TPM" generically in that context. But the signed policies are
exclusive to TPM2, hence always say TPM2 there.
We mostly got that right, except at one place. Fix that.
Let's grab another so far unused PCR, and measure all sysext images into
it that we load from the ESP. Note that this is possibly partly redundant,
since sysext images should have dm-verity enabled, and that is hooked up
to IMA. However, measuring this explicitly has the benefit that we can
measure filenames too, easily, and that all without need for IMA or
anything like that.
This means: when booting a unified sd-stub kernel through sd-boot we'll
now have:
1. PCR 11: unified kernel image payload (i.e. kernel, initrd, boot
splash, dtb, osrelease)
2. PCR 12: kernel command line (i.e. the one embedded in the image, plus
optionally an overriden one) + any credential files picked up by
sd-stub
3. PCR 13: sysext images picked up by sd-stub
And each of these three PCRs should carry just the above, and start from
zero, thus be pre-calculatable.
Thus, all components and parameters of the OS boot process (i.e.
everything after the boot loader) is now nicely pre-calculable.
NOTE: this actually replaces previous measuring of the syext images into
PCR 4. I added this back in 845707aae2,
following the train of thought, that sysext images for the initrd should
be measured like the initrd itself they are for, and according to my
thinking that would be a unified kernel which is measured by firmware
into PCR 4 like any other UEFI executables.
However, I think we should depart from that idea. First and foremost
that makes it harder to pre-calculate PCR 4 (since we actually measured
quite incompatible records to the TPM event log), but also I think
there's great value in being able to write policies that bind to the
used sysexts independently of the earlier boot chain (i.e. shim, boot
loader, unified kernel), hence a separate PCR makes more sense.
Strictly speaking, this is a compatibility break, but I think one we can
get away with, simply because the initrd sysext images are currently not
picked up by systemd-sysext yet in the initrd, and because of that we
can be reasonably sure noone uses this yet, and hence relies on the PCR
register used. Hence, let's clean this up before people actually do
start relying on this.
Here we grab a new – on Linux so far unused (by my Googling skills, that
is) – and measure all static components of the PE kernel image into.
This is useful since for the first time we'll have a PCR that contains
only a PCR of the booted kernel, nothing else. That allows putting
together TPM policies that bind to a specific kernel (+ builtin initrd),
without having to have booted that kernel first. PCRs can be
pre-calculated. Yay!
You might wonder, why we measure just the discovered PE sections we are
about to use, instead of the whole PE image. That's because of the next
step I have in mind: PE images should also be able to carry an
additional section that contains a signature for its own expected,
pre-calculated PCR values. This signature data should then be passed
into the booted kernel and can be used there in TPM policies. Benefit:
TPM policies can now be bound to *signatures* of PCRs, instead of the
raw hash values themselves. This makes update management a *lot* easier,
as policies don't need to be updated whenever a kernel is updated, as
long as the signature is available. Now, if the PCR signature is
embedded in the kernel PE image it cannot be of a PCR hash of the kernel
PE image itself, because that would be a chicken-and-egg problem. Hence,
by only measuring the relavent payload sections (and that means
excluding the future section that will contain the PCR hash signature)
we avoid this problem, naturally.
So, typically systemd-boot is referenced as sd-boot, due to te usual
shorter naming in ESP resources. systemd-stub didnt do that so far,
since it never appears as separate files in the ESP. However it's super
annoying that you can find "man sd-boot", but not the very closely
related "man sd-stub". Let's fix that, and also add an "sd-stub" alias
to the "systemd-stub" man page.
Some types of credentials that a user would want to pass
into the initrd do not depend on the specific kernel/initrd
version. For instance, this can include SSH keys, rootfs
encryption keys, dm-integrity keys, and so on. This
introduces a directory where such credentials can be placed
so that any kernel image will load them
