IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add quotes around use of $env{MODALIAS} in rules.d/80-drivers.rules. The
modalias can contain whitespace, for example when it is dynamically generated
using device or vendor IDs.
There are nothing we can configure in udevd for loopback interfaces;
no ethertool configs can be applied, MAC address, interface name should
not be touched.
m4 is required to build the test SELinux module:
```
[ 31.321789] sh[483]: /bin/sh: line 1: m4: command not found
[ 31.882668] sh[488]: Compiling targeted systemd_test module
[ 32.120862] sh[492]: /bin/sh: line 1: m4: command not found
[ 32.159897] sh[458]: make: *** [/usr/share/selinux/devel/include/Makefile:156: tmp/systemd_test.mod] Error 127
```
I wanted to use jinja2 templating here too, but it's hard to get right:
custom_target() strips the executable bit by default (unlike configure_file
apparently). custom_target() has install_mode setting, but it was only added
in meson-0.47, so it can't be used while we support 0.46. And without the
executable bit the test is not invoked properly. For example, "root-unittests"
in the debian package calls test-* after installation, so the executable bit
there is necessary. It would be possible to adjust the file mode after the
fact, but it would make things more complicated.
So let's use the native meson substitutions here. We don't need anything more
fancy.
m4 was hugely popular in the past, because autotools, automake, flex, bison and
many other things used it. But nowadays it much less popular, and might not even
be installed in the buildroot. (m4 is small, so it doesn't make a big difference.)
(FWIW, Fedora dropped make from the buildroot now,
https://fedoraproject.org/wiki/Changes/Remove_make_from_BuildRoot. I think it's
reasonable to assume that m4 will be dropped at some point too.)
The main reason to drop m4 is that the syntax is not very nice, and we should
minimize the number of different syntaxes that we use. We still have two
(configure_file() with @FOO@ and jinja2 templates with {{foo}} and the
pythonesque conditional expressions), but at least we don't need m4 (with
m4_dnl and `quotes').
Printing stdout and stderr from a failed test makes it harder to
interpret what the specific problem was; instead let's print out
the lines in order as we got them when the test was run
Also save failed test output to file if ARTIFACT_DIRECTORY is defined
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
This fixes an issue introduced by the commit 954c77c251.
For some reasons, setting default ACL on $TESTDIR makes TEST-29-PORTABLE
fail. Let's drop the default ACL, and set ACL on saved results instead.
Fixes#19519.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=33881.
Not only we would duplicate unknown input on the stack, we would do it
over and over. So let's first check that the input has reasonable length,
but also allocate just one fixed size buffer.
"systemd-testsuite" gets in the way when grepping for "testsuite-*.sh".
Also, the name doesn't matter for anything, so let's just use something
very short to save space.
When editing this function in 7bf20e48bd, I couldn't
decide whether to initialize ret at the top and only reset it on success, or
whether to assign a value in each branch. In the end I did neither ;( So if the
test finished without creating any of the result files, we would echo a
message, but return "success".
But there was bigger confusion with /failed: some tests create it empty, some
don't. I think we may want to do away pre-creation of /failed completely, and
assume the test failed unless /testok is found. But I'm leaving that for later
rework. For now let's just make sure we report return success only if /testok
or /skipped is found.
This commit applies the filtering imposed by LogLevelMax on a unit's
processes to messages logged by PID1 about the unit as well.
The target use case for this feature is a service that runs on a timer
many times an hour, where the system administrator decides that writing
a generic success message to the journal every few minutes or seconds
adds no diagnostic value and isn't worth the clutter or disk I/O.
Basically the same scenario as in
a33e2692e1, where `awk` exits as soon
as it finds a match, thus sending SIGPIPE to `ldd` if it's not fast
enough. That, in combination with `set -o pipefail` causes random &
unexpected fails, like:
```
No journal files were found.
-rw-r----- 1 root root 16777216 Apr 30 10:31
/var/tmp/TEST-01-BASIC_sanitizers-nspawn/system.journal
TEST-01-BASIC RUN: Basic systemd setup [OK]
systemd is not linked against the ASan DSO
gcc does this by default, for clang compile with -shared-libasan
make: *** [Makefile:2: clean-again] Error 1
make: Leaving directory '/build/test/TEST-01-BASIC'
```
Now, RoutesToDNS= and RoutesToNTP= are enabled by default on DHCPv4
client. So, if DHCP server picks up DNS or NTP servers from uplink,
then the routes may break CI environment.
Hopefully fixes#19463.
https://github.com/systemd/systemd/pull/19316 failed with:
[1065/1670] Linking target systemd-hwdb
--- command ---
14:28:29 /root/src/test/hwdb-test.sh
--- stdout ---
./systemd-hwdb does not exist, please build first
I'm not sure what is going on here… In principle meson says that tests may be
called from any directory, but in practice is was always the build directory.
So far we were relying on systemd-hwdb being present in '.', and this worked.
Either way, it's nicer to pass the exact path, so let's do that.
This allows to limit units to machines that run on a certain firmware
type. For device tree defined machines checking against the machine's
compatible is also possible.
