IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This should PID collisions a tiny bit less likely, and thus improve
security and robustness.
2^22 isn't particularly a lot either, but it's the current kernel
limitation.
Bumping this limit was suggested by Linus himself:
https://lwn.net/ml/linux-kernel/CAHk-=wiZ40LVjnXSi9iHLE_-ZBsWFGCgdmNiYZUXn1-V5YBg2g@mail.gmail.com/
Let's experiment with this in systemd upstream first. Downstreams and
users can after all still comment this easily.
Besides compat concern the most often heard issue with such high PIDs is
usability, since they are potentially hard to type. I am not entirely sure though
whether 4194304 (as largest new PID) is that much worse to type or to
copy than 65563.
This should also simplify management of per system tasks limits as by
this move the sysctl /proc/sys/kernel/threads-max becomes the primary
knob to control how many processes to have in parallel.
Example output:
title: Fedora 30 (Workstation Edition) (5.0.5-300.fc30.x86_64)
id: 08a5690a2eed47cf92ac0a5d2e3cf6b0-5.0.5-bad-300.fc30.x86_64
source: /boot/efi/loader/entries/08a5690a2eed47cf92ac0a5d2e3cf6b0-5.0.5-bad-300.fc30.x86_64.conf
version: 5.0.5-300.fc30.x86_64
machine-id: 08a5690a2eed47cf92ac0a5d2e3cf6b0
linux: /08a5690a2eed47cf92ac0a/5.0.5-300.fc30.x86_64/linux (No such file or directory)
initrd: /08a5690a2eed47cf92ac0a/5.0.5-300.fc30.x86_64/initrd (No such file or directory)
/08a5690a2eed47cf92ac0a/5.0.5-300.fc30.x86_64/initrd2 (No such file or directory)
options: ...
I think this is more useful (because it's easy to stick the path into an editor command
when one wants to change the options or inspect the files), and more self-explanatory.
Example output:
title: Fedora 30 (Workstation Edition) (4.20.16-200.fc29.x86_64)
id: 08a5690a2eed47cf92ac0a5d2e3cf6b0-4.20.16-200.fc29.x86_64
source: /boot/efi/loader/entries/08a5690a2eed47cf92ac0a5d2e3cf6b0-4.20.16-200.fc29.x86_64.conf
version: 4.20.16-200.fc29.x86_64
...
title: Fedora 30 (Workstation Edition)
id: fedora-30
source: /boot/efi/EFI/Linux/linux-5.0.5-300.fc30.x86_64-08a5690a2eed47cf92ac0a5d2e3cf6b0.efi
linux: EFI/Linux/linux-5.0.5-300.fc30.x86_64-08a5690a2eed47cf92ac0a5d2e3cf6b0.efi
...
title: Reboot Into Firmware Interface
id: auto-reboot-to-firmware-setup
source: /sys/firmware/efi/efivars/LoaderEntries-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f
Nitpicky, but we've used a lot of random spacings and names in the past,
but we're trying to be completely consistent on "cgroup vN" now.
Generated by `fd -0 | xargs -0 -n1 sed -ri --follow-symlinks 's/cgroups? ?v?([0-9])/cgroup v\1/gI'`.
I manually ignored places where it's not appropriate to replace (eg.
"cgroup2" fstype and in src/shared/linux).
Let's simplify things and drop the logic that /var/lib/machines is setup
as auto-growing btrfs loopback file /var/lib/machines.raw.
THis was done in order to make quota available for machine management,
but quite frankly never really worked properly, as we couldn't grow the
file system in sync with its use properly. Moreover philosophically it's
problematic overriding the admin's choice of file system like this.
Let's hence drop this, and simplify things. Deleting code is a good
feeling.
Now that regular file systems provide project quota we could probably
add per-machine quota support based on that, hence the btrfs quota
argument is not that interesting anymore (though btrfs quota is a bit
more powerful as it allows recursive quota, i.e. that the machine pool
gets an overall quota in addition to per-machine quota).
The concept is redundant and predates the special chars that do the same
in ExecStar=. Let's settle on advertising just the latter, and hide
PermissionsStartOnly= from the docs (even if we continue supporting it).
We would accept e.g. FailureAction=reboot-force in user units and then do an
exit in the user manager. Let's be stricter, and define "exit"/"exit-force" as
the only supported actions in user units.
v2:
- rename 'exit' to 'exit-force' and add new 'exit'
- add test for the parsing function
/etc/systemd/sleep.conf gains four new switches:
AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=, AllowHybridSleep=.
Disabling specific modes was already possible by masking suspend.target,
hibernate.target, suspend-then-hibernate.target, or hybrid-sleep.target.
But this is not convenient for distributions, which want to set some defaults
based on what they want to support. Having those available as configuration
makes it easy to put a config file in /usr/lib/systemd/sleep.conf.d/ that
overrides the defaults and gives instructions how to undo that override.
canonicalize_file_name() invocations were replaced by chase_symlinks() in
Decemeber 2016 with PR #4694, so we don't need this mention in the TODO anymore
When a user logs in, systemd-pam will wait for the user manager instance to
report readiness. We don't need to wait for all the jobs to finish, it
is enough if the basic startup is done and the user manager is responsive.
systemd --user will now send out a READY=1 notification when either of two
conditions becomes true:
- basic.target/start job is gone,
- the initial transaction is done.
Also fixes#2863.
In this mode, we'll directly connect stdin/stdout/stderr of the invoked
service with whatever systemd-run itself is invoked on. This allows
inclusion of "systemd-run" commands in shell pipelines, as unlike
"--pty" this means EOF of stdin/stdout/stderr are propagated
independently.
If --pty and --pipe are combined systemd-run will automatically pick the
right choice for the context it is invoked in, i.e. --pty when invoked
on a TTY, and --pipe otherwise.
Some kdbus_flag and memfd related parts are left behind, because they
are entangled with the "legacy" dbus support.
test-bus-benchmark is switched to "manual". It was already broken before
(in the non-kdbus mode) but apparently nobody noticed. Hopefully it can
be fixed later.
"*-*~1" => The last day of every month
"*-02~3..5" => The third, fourth, and fifth last days in February
"Mon 05~07/1" => The last Monday in May
Resolves#3861
core: add new RestrictNamespaces= unit file setting
Merging, not rebasing, because this touches many files and there were tree-wide cleanups in the mean time.
This new setting permits restricting whether namespaces may be created and
managed by processes started by a unit. It installs a seccomp filter blocking
certain invocations of unshare(), clone() and setns().
RestrictNamespaces=no is the default, and does not restrict namespaces in any
way. RestrictNamespaces=yes takes away the ability to create or manage any kind
of namspace. "RestrictNamespaces=mnt ipc" restricts the creation of namespaces
so that only mount and IPC namespaces may be created/managed, but no other
kind of namespaces.
This setting should be improve security quite a bit as in particular user
namespacing was a major source of CVEs in the kernel in the past, and is
accessible to unprivileged processes. With this setting the entire attack
surface may be removed for system services that do not make use of namespaces.
coredump had code to check if copy_bytes() hit the max_bytes limit,
and refuse further processing in that case.
But in 84ee096044, the return convention for copy_bytes() was changed
from -EFBIG to 1 for the case when the limit is hit, so the condition
check in coredump couldn't ever trigger.
But it seems that *do* want to process such truncated cores [1].
So change the code to detect truncation properly, but instead of
returning an error, give a nice log entry.
[1] https://github.com/systemd/systemd/issues/3883#issuecomment-239106337
Should fix (or at least alleviate) #3883.
We were already unconditionally using the unicode character when the
input string was not pure ASCII, leading to different behaviour in
depending on the input string.
systemd[1]: Starting printit.service.
python3[19962]: foooooooooooooooooooooooooooooooooooo…oooo
python3[19964]: fooąęoooooooooooooooooooooooooooooooo…oooo
python3[19966]: fooąęoooooooooooooooooooooooooooooooo…ąęąę
python3[19968]: fooąęoooooooooooooooooąęąęąęąęąęąęąęą…ąęąę
systemd[1]: Started printit.service.
This splits the OS field in two : one for the distribution name
and one for the the version id.
Dashes are written for missing fields.
This also prints ip addresses of known machines. The `--max-addresses`
option specifies how much ip addresses we want to see. The default is 1.
When more than one address is written for a machine, a `,` follows it.
If there are more ips than `--max-addresses`, `...` follows the last
address.
