IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This code was partially broken, since the firmware directory was
undefined. Also, some of the parts were a dead code, since they relied
on code from the original dracut test suite.
`command -v <bin> | grep ...` can under certain conditions cause the
`command` to exit with SIGPIPE, which in combination with `set -o
pipefail` means that the tests sometimes randomly die during setup.
Let's avoid using pipes in such cases.
This breaks some existing loops which previously ignored if the piped
program exited with EC >0. Rewrite them to mitigate this (and also make
them more robust in some cases).
When trying to calculate the next firing of 'Sun *-*-* 01:00:00', we'd fall
into an infinite loop, because mktime() moves us "backwards":
Before this patch:
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
...
We rely on mktime() normalizing the time. The man page does not say that it'll
move the time forward, but our algorithm relies on this. So let's catch this
case explicitly.
With this patch:
$ TZ=Europe/Dublin faketime 2021-03-21 build/systemd-analyze calendar --iterations=5 'Sun *-*-* 01:00:00'
Normalized form: Sun *-*-* 01:00:00
Next elapse: Sun 2021-03-21 01:00:00 GMT
(in UTC): Sun 2021-03-21 01:00:00 UTC
From now: 59min left
Iter. #2: Sun 2021-04-04 01:00:00 IST
(in UTC): Sun 2021-04-04 00:00:00 UTC
From now: 1 weeks 6 days left <---- note the 2 week jump here
Iter. #3: Sun 2021-04-11 01:00:00 IST
(in UTC): Sun 2021-04-11 00:00:00 UTC
From now: 2 weeks 6 days left
Iter. #4: Sun 2021-04-18 01:00:00 IST
(in UTC): Sun 2021-04-18 00:00:00 UTC
From now: 3 weeks 6 days left
Iter. #5: Sun 2021-04-25 01:00:00 IST
(in UTC): Sun 2021-04-25 00:00:00 UTC
From now: 1 months 4 days left
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1941335.
otherwise udev complains about the file being world-writable:
systemd-udevd[228]: Configuration file /etc/udev/rules.d/00-set-LD_PRELOAD.rules is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
Fixes: systemd/systemd-centos-ci#354
This test would normally get stuck when trying to mount the verity image
due to:
systemd-udevd[299]: dm-0: '/usr/sbin/dmsetup udevflags 6293812'(err) '==371==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.'
systemd-udevd[299]: dm-0: Process '/usr/sbin/dmsetup udevflags 6293812' failed with exit code 1
...
systemd-udevd[299]: dm-0: '/usr/sbin/dmsetup udevcomplete 6293812'(err) '==372==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.'
systemd-udevd[299]: dm-0: Process '/usr/sbin/dmsetup udevcomplete 6293812' failed with exit code 1.
systemd-udevd[299]: dm-0: Command "/usr/sbin/dmsetup udevcomplete 6293812" returned 1 (error), ignoring.
so let's add a simple udev rule which sets $LD_PRELOAD for the block
subsystem.
Also, install the ASan library along with necessary dependencies into
the verity minimal image, to get rid of the annoying (yet harmless)
errors about missing library from $LD_LIBRARY.
When running integration tests under sanitizers D-Bus fails to
shutdown cleanly, causing unnecessary noise in the logs:
```
dbus-daemon[272]: ==272==LeakSanitizer has encountered a fatal error.
dbus-daemon[272]: ==272==HINT: For debugging, try setting environment variable LSAN_OPTIONS=verbosity=1:log_threads=1
dbus-daemon[272]: ==272==HINT: LeakSanitizer does not work under ptrace (strace, gdb, etc)
```
Since we're not "sanitizing" D-Bus anyway let's disable LSan's at_exit
check for the dbus.service to get rid of this error.
When a subshell is used ('make' or 'make all') the LOOPDEV environment
variable, which is used to store the opened loop device, is lost.
So the cleanup on trap/exit doesn't do anything, and the loop
device used to mount the test image is left around.
Avoid using a subshell to fix the issue.
The source package in the apt cache might be older than the
packaging from salsa.debian.org/systemd-team/systemd so it might not
list all the current binary packages.
This is currently the case for systemd-timesyncd, so TEST-30 fails.
Simply grep the control file rather than using apt-cache when iterating
over the packages contents.
Binaries on the latest Arch Linux use `call` instructions instead of
`callq`, which breaks the ASan detection and eventually the image
building process (due to insufficient space).
There may be situations where a cgroup should be protected from killing
or deprioritized as a candidate. In FB oomd xattrs are used to bias oomd
away from supervisor cgroups and towards worker cgroups in container
tasks. On desktops this can be used to protect important units with
unpredictable resource consumption.
The patch allows systemd-oomd to understand 2 xattrs:
"user.oomd_avoid" and "user.oomd_omit". If systemd-oomd sees these
xattrs set to 1 on a candidate cgroup (i.e. while attempting to kill something)
AND the cgroup is owned by root, it will either deprioritize the cgroup as
a candidate (avoid) or remove it completely as a candidate (omit).
Usage is restricted to root owned cgroups to prevent situations where an
unprivileged user can set their own cgroups lower in the kill priority than
another user's (and prevent them from omitting their units from
systemd-oomd killing).
Add NO_BUILD var to allow testing with no local build, by installing
local systemd files into the image.
This only works for debian-like distros currently, that use the
tools 'apt' and 'dpkg' for package management.
The $BUILD_DIR is only used in test-functions, and doesn't need to
be specified in any other scripts. Additionally, to be able to allow
the integration test suite to be run against locally installed binaries,
instead of built binaries, moving BUILD_DIR logic completely into
test-functions allows later patches to be simpler.
Building custom images for each test takes a lot of time.
Build the default one, and if the test needs incompatible changes
just copy it and extend it instead.
This reverts commit 73484ecff9.
3976f372ae moved libudev.so to be built in the
main directory, so this addition to $LD_LIBRARY_PATH is now obsolete.
After that commit, we build the following shared libraries:
build/libnss_myhostname.so.2
build/libnss_mymachines.so.2
build/libnss_resolve.so.2
build/libnss_systemd.so.2
build/libsystemd.so.0.30.0
build/libudev.so.1.7.0
build/pam_systemd.so
build/pam_systemd_home.so
build/src/boot/efi/stub.so
build/src/boot/efi/systemd_boot.so
build/src/shared/libsystemd-shared-247.so
EFI stubs don't matter, and libsystemd-shared-nnn.so is loaded through rpath,
and is doesn't need to and shouldn't be in $LD_LIBRARY_PATH. In effect, we only
ever need to add the main build directory to the search path.
Not all optional libraries might be available on developers machines,
so log and skip.
Also some pkg-config files are broken (eg: tss2 on Debian Stable) so
skip if the required variables are missing, and improve logs.
By default the test suite prefers qemu, and uses nspawn only if
a test specifically says it doesn't support qemu.
Add a variable to allow flipping the default, and run as many
tests under nspawn as possible.
Allows to split the test run in two parts. Most tests can run under
nspawn which is much faster, and they can be ran in one chunk with
TEST_NO_QEMU=1. The qemu-only tests, which are just a handful, can
be ran in another chunk with TEST_QEMU_ONLY=1.
Allows autopkgtest to be split in two parts.
The image build function greps for ExecStart lines in unit files, but some
of them (eg: systemd-firstboot) do not use a full path.
It then falls back to 'type -P' but that only works if you have the binary
installed. For optional binaries like systemd-firstboot, the installation
can then fail.
Manually check if the binary already exists in /[usr/][s]bin.
Usually on Debian ROOTLIBDIR is /lib/<arch triplet>, which is not the right place.
Use pkg-config since we define it, and then fallback to /usr/lib/systemd/user which is
the canonical location.
On both Debian&friends and Fedora dbus/dbus-broker install the user socket/service
under /usr/lib/systemd/user, not /lib/systemd/systemd/user.
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
Follow-up for 43b49470d1.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes#17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The systemd-user file has been moved from /etc/pam.d into /usr/lib/pam.d,
so test-functions needs to copy it from /usr/lib/pam.d instead.
This will copy it from either location.
When invoking "ldd" to find dependency libraries we already set
$LD_LIBRARY_PATH to point to our own build tree, so that our libraries
are checked, not the host libraries. This is not sufficient howeever, as
libudev is built in a subdir. Add that, too.
We have four legal cases:
1. /usr/lib/os-release exists and /etc/os-release is a symlink to it
2. both exist but /etc/os-release is not a symlink to /usr/lib/os-release
3. only /usr/lib/os-release exists
4. only /etc/os-release exists
The generic setup code in test-functions and create-busybox-image didn't handle
case 3.
The test-specific code in TEST-50 didn't handle 2 (because the general setup
code would only install /etc/os-release in the image and
grep -f /usr/lib/os-release would not work) and 4 (same reason) and would fail
in case 3 in generic setup.
Since the hwdb update from a79be2f807
the systemd-hwdb-update service started timing out under ASan when
compiled with gcc, as we started tripping over the 3 minutes timeout.
This affects only gcc runs, since the current gcc on Arch still suffers
from the detect_stack_use_after_return performance penalty[0]. Until
the fixed gcc is present in the respective repositories, let's bump
the timeout to 4 minutes, as we might not be able to upgrade right
away, due to systemd/systemd#16199.
Before the hwdb update:
[ 7958.292540] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 7958.304005] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 7958.314434] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 8008.520082] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8068.520151] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8125.682843] time[63]: 84.47user 82.92system 2:47.50elapsed 99%CPU (0avgtext+0avgdata 811512maxresident)k
[ 8125.682843] time[63]: 0inputs+19680outputs (0major+25000853minor)pagefaults 0swaps
After the hwdb update:
[ 6215.491958] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 6215.503380] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 6215.514172] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 6329.392918] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 6394.920205] time[63]: 89.48user 89.98system 2:59.55elapsed 99%CPU (0avgtext+0avgdata 812764maxresident)k
[ 6394.920205] time[63]: 0inputs+20568outputs (0major+27318354minor)pagefaults 0swaps
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94910
Prompted by systemd/systemd#16111.
* check if /var is a mountpoint - if not, something went wrong. In case
of systemd/systemd#16111 the /failed file was created, because
systemd-cryptsetup failed, but it ended up being empty, making the result
check incorrectly pass
* forward journal messages to console - if we fail to mount /var,
journald won't flush logs to the persistent storage and we end up
empty handed and with no clue what went wrong
For example, without systemd/systemd#16111 and with this patch:
...
[FAILED] Failed to start systemd-cryptsetup@varcrypt.service.
See 'systemctl status systemd-cryptsetup@varcrypt.service' for details.
[DEPEND] Dependency failed for cryptsetup.target.
...
[ 3.882451] systemd-cryptsetup[581]: Key file /etc/varkey is world-readable. This is not a good idea!
[ 3.883946] systemd-cryptsetup[581]: WARNING: Locking directory /run/cryptsetup is missing!
[ 3.884846] systemd-cryptsetup[581]: Failed to load Bitlocker superblock on device /dev/disk/by-uuid/180ba5ef-873b-4018-9968-47c23431f71a: Invalid argument
...
[ 4.099451] sh[606]: + mountpoint /var
[ 4.100025] sh[603]: + systemctl poweroff --no-block
[ 4.101636] systemd[1]: Finished systemd-user-sessions.service.
[ 4.102598] sh[608]: /var is not a mountpoint
[FAILED] Failed to start testsuite-02.service.
Let's create new images public by default and then symlink/copy them
into the respective private directories afterwards, not the other way
around. This should fix a nasty race condition in parallel runs where
one tests attempts to copy the backing public image at the same moment
another test is already modifying it.
Support running tests in parallel by switching to copying of the
base image instead of symlinking it..
This still requires some setup steps, like running `make setup` on tests
which have unique $IMAGE_NAME beforehand (and sequentially), otherwise
they'll all try to create the same base image when started in parallel,
leading to nasty issues. However, as running the integration tests in
parallel is such an unusual use case it should be good enough, for now.
As Debian/Ubuntu use /lib/systemd instead of /usr/lib/systemd,
add systemd-journal-remote to the list of programs that test-functions
detects the correct path to, and replace its direct usage with
$SYSTEMD_JOURNAL_REMOTE
Also use $JOURNALCTL instead of journalctl.
Also minor correction in install_plymouth() to look in /lib/... as
well as /usr/lib/... and /etc/...
Remove the artifact files indicating test result (testok, failed, and
skipped) just before running the test so we always get the latest and
most relevant result instead of incorrectly consuming previous results.
Discovered in https://github.com/systemd/systemd/pull/15378#issuecomment-616801873
This doesn't really matter, since in non-/usr-merged systems plymouth
needs to be in /bin and on merged ones it doesn't matter, but it is
still prettier to insert the right path, and avoid /bin on merged
systems, since it's just a compat symlink.
Replaces: #15351
Using s-j-remote fixes the following issue: when coalescing files from multiple
inputs, simply copying all files with into the the same directory might
potentially mess things up, because a newer system.journal might overwrite an
older journal. This happens because we run multiple tests from the same image,
and need to clean out the directory after each run.
By using systemd-journal-remote, we nicely coalesce all files. This has the
advantage that if there aren't too many logs, we end up with just one journal
file.
ARTIFACT_DIRECTORY is for ubuntuautopackagetests, where the journal files are
copied to a separate directory to preserve after tests have been run. This
functionality can now be recreated by setting
ARTIFACT_DIRECTORY=$AUTOPKGTEST_ARTIFACTS.
It is more trouble than it is worth. The setup is of a loopback device
is very quick, so it's better to always create it when needed and
immediately drop afterwards.
This causes the unprivileged-nspawn-root directory to be removed
after running one test. The advantage is that we reduce the maximum
disk-space use quite a bit (47*400 MB → about 18GB).
has-overflow was a temporary hack that was removed in
844da987ef (Oct. 2016). All the makefiles
can be the same, and all the targets can be handled identically.
Before, we'd copy the test tree into nspawn-root, and run the tests from there.
This is OK, and doesn't actually take much extra time. But it uses quite a lot
of extra disk space. So let's make things a bit more efficient by running
directly from the image file.
We still run the unprivileged nspawn tests from a copy. Once the kernel
implements fs shift, we can do away with that too.
Before, we'd create a separate image for each test, in
/var/tmp/systemd-test.XXXXX/rootdisk.img. Most of the images
where very similar, except that each one had some unit files installed
specifically for the test. The installation of those custom unit files
was removed in previous commits (all the unit files are always installed).
The new approach is to only create as few distinct images as possible.
We have:
default.img: the "normal" image suitable for almost all the tests
basic.img: the same as default image but doesn't mask any services
cryptsetup.img: p2 is used for encrypted /var
badid.img: /etc/machine-id is overwritten with stuff
selinux.img: with selinux added for fun and fun
and a few others:
ls -l build/test/*img
lrwxrwxrwx 1 root root 38 Mar 21 21:23 build/test/badid.img -> /var/tmp/systemd-test.PJFFeo/badid.img
lrwxrwxrwx 1 root root 38 Mar 21 21:17 build/test/basic.img -> /var/tmp/systemd-test.na0xOI/basic.img
lrwxrwxrwx 1 root root 43 Mar 21 21:18 build/test/cryptsetup.img -> /var/tmp/systemd-test.Tzjv06/cryptsetup.img
lrwxrwxrwx 1 root root 40 Mar 21 21:19 build/test/default.img -> /var/tmp/systemd-test.EscAsS/default.img
lrwxrwxrwx 1 root root 39 Mar 21 21:22 build/test/nspawn.img -> /var/tmp/systemd-test.HSebKo/nspawn.img
lrwxrwxrwx 1 root root 40 Mar 21 21:20 build/test/selinux.img -> /var/tmp/systemd-test.daBjbx/selinux.img
lrwxrwxrwx 1 root root 39 Mar 21 21:21 build/test/test08.img -> /var/tmp/systemd-test.OgnN8Z/test08.img
I considered trying to use the same image everywhere. It would probably be
possible, but it would be very brittle. By using separate images where it is
necessary we keep various orthogonal modifications independent.
The way that images are cached is complicated by the fact that we still
want to keep them in /var/tmp. Thus, an image is created on first use and
linked to from build/test/ so it can be found by other tests.
Tests cannot be run in parallel. I think that is an acceptable limitation.
Creation of the images was probably taking more resources then the actual
tests, so we should be better off anyway.
We had an fstab for the sole purpose of remounting "/" rw. Mounting root ro
is a pointless excercise in obsolete approaches. More importantly, the nspawn
image is now the same as the qemu one.
The two timezone files are now installed in the global setup. I am not too
happy about this, but it still seems better than to create a completely
separate image just for this.
I picked the list of zone files to install by grepping through the code. This
is is a bit brittle, but installing all of them takes a while, and more
importantly, writes a lot of lines to the log.
As in 2a5fcfae02
and in 3e67e5c992
using /usr/bin/env allows bash to be looked up in PATH
rather than being hard-coded.
As with the previous changes the same arguments apply
- distributions have scripts to rewrite shebangs on installation and
they know what locations to rely on.
- For tests/compilation we should rather rely on the user to have setup
there PATH correctly.
In particular this makes testing from git easier on NixOS where do not provide
/bin/bash to improve compose-ability.
Having /etc/securetty in test containers prevents root from logging into
them:
```
Jan 31 10:15:11 systemd-testsuite login[69]: pam_securetty(login:auth): access denied: tty 'pts/0' is not secure !
Jan 31 10:15:11 systemd-testsuite login[69]: FAILED LOGIN 1 FROM pts/0 FOR root, Authentication failure
```
The test exercises that PrivateTmp=yes and ProtectHome={read-only,tmpfs}
directives work as expected when PrivateUsers=yes in a user manager.
Some code is also added to test-functions to help set up test cases that
exercise the user manager.
