IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Move gcrypt.h include inside grcrypt-util.h.
- Allow gcrypt-util.[ch] to be compiled even without gcrypt.
This allows the logic in files using gcrypt to be simplified.
- Fix compilation of systemd-resolve without gcrypt.
systemd-resolved already supported that.
Fixes#2711.
lldp.h contains definitions of LLDP types, subtypes and capabilities which
should be exposed in public headers. Get rid of the file and move those
definitions to sd-lldp.h with the SD_ prefix.
journal-upload doesn't really need microhttpd to run.
Without the dependency, we can cross compile systemd
without microhttpd and get the uploader part of the
remote logging.
Change-Id: I28dfa5ad2aae94e50de1d32713e1827623c3fd1d
We have a bunch of syscall wrapper definitions and it's easier to
see that they follow the same pattern if they are not interspersed
with other defines.
Change the wrappers to be uniform:
- if __NR_XXX is not defined, do not bother to call the syscall,
and return -1/ENOSYS immediately.
- do not check __NR_XXX defines if we detect the symbol as defined,
since we don't need them anyway
- reindent stuff for readability
New file basic/missing_syscall.h is included at the end of missing.h
because it might make use of some of the definitions in missing.h.
The source file name and the binary name were mismatched.
Rename binary to match.
Make the test exit with TEST_SKIP if the data is missing or we
have no permissions. Otherwise, the data will be printed, which
should be safe to enable by default.
The manpage of seccomp specify that using seccomp with
SECCOMP_SET_MODE_FILTER will return EACCES if the caller do not have
CAP_SYS_ADMIN set, or if the no_new_privileges bit is not set. Hence,
without NoNewPrivilege set, it is impossible to use a SystemCall*
directive with a User directive set in system mode.
Now, NoNewPrivileges is set if we are in user mode, or if we are in
system mode and we don't have CAP_SYS_ADMIN, and SystemCall*
directives are used.
Add path argument to clock_is_localtime() and default to "/etc/adjtime" if it's
NULL. This makes the function testable.
Add test-clock: initial test cases for some scenarios, using a temporary file.
This also checks the behaviour with a NULL (i. e. the system's /etc/adjtime)
file.
This commit rips out systemd-bootchart. It will be given a new home, outside
of the systemd repository. The code itself isn't actually specific to
systemd and can be used without systemd even, so let's put it somewhere
else.
Let's add some minimalistic LLDP sender support. The idea is that this is
either on or off, and all fields determined automatically rather than
configured explicitly.
This reworks the sd-lldp substantially, simplifying things on one hand, and
extending the logic a bit on the other.
Specifically:
- Besides the sd_lldp object only one other object is maintained now,
sd_lldp_neighbor. It's used both as storage for literal LLDP packets, and for
maintainging info about peers in the database. Separation between packet, TLV
and chassis data is not maintained anymore. This should be a major
simplification.
- The sd-lldp API has been extended so that a couple of per-neighbor fields may
be queried directly, without iterating through the object. Other fields that
may appear multiple times, OTOH have to be iterated through.
- The maximum number of entries in the neighbor database is now configurable
during runtime.
- The generation of callbacks from sd_lldp objects is more restricted:
callbacks are only invoked when actual data changed.
- The TTL information is now hooked with a timer event, so that removals from
the neighbor database due to TTLs now result in a callback event.
- Querying LLDP neighbor database will now return a strictly ordered array, to
guarantee stability.
- A "capabilities" mask may now be configured, that selects what type of LLDP
neighbor data is collected. This may be used to restrict collection of LLDP
info about routers instead of all neighbors. This is now exposed via
networkd's LLDP= setting.
- sd-lldp's API to serialize the collected data to text files has been removed.
Instead, there's now an API to extract the raw binary data from LLDP neighbor
objects, as well as one to convert this raw binary data back to an LLDP
neighbor object. networkd will save this raw binary data to /run now, and the
client side can simply parse the information.
- support for parsing the more exotic TLVs has been removed, since we are not
using that. Instead there are now APIs to extract the raw data from TLVs.
Given how easy it is to parse the TLVs clients should do so now directly
instead of relying on our APIs for that.
- A lot of the APIs that parse out LLDP strings have been simplified so that
they actually return strings, instead of char arrays with a length. To deal
with possibly dangerous characters the strings are escaped if needed.
- APIs to extract and format the chassis and port IDs as strings has been
added.
- lldp.h has been simplified a lot. The enums are anonymous now, since they
were never used as enums, but simply as constants. Most definitions we don't
actually use ourselves have eben removed.
Let's just keep the few parts we actually need of it in the main sd_lldp
object, so that we can simplify things quite a bit.
While we are at it, remove ifname and mac fields which we make no use of
whatsoever.
If ./configure --disable-resolved has been used, do not try to build
test-dns-packet and test-resolve-tables which depend on it.
Previously, the SOURCES, LIBS and LDADDs for these tests were made conditional
while the main rules for them weren't, causing build failures trying to build a
binary with no sources.
This was uncovered when trying to build udeb for systemd in CI, which uses
--disable-resolved for a minimal build, which uncovered the issue.
Fixes#2651.
Let's make sure DNSSEC gets more testing, by defaulting DNSSEC to
"allow-downgrade" mode. Since distros should probably not ship DNSSEC enabled
by default add a configure switch to disable this again.
DNSSEC in "allow-downgrade" mode should mostly work without affecting user
experience. There's one exception: some captive portal systems rewrite DNS in
order to redirect HTTP traffic to the captive portal. If these systems
implement DNS servers that are otherwise DNSSEC-capable (which in fact is
pretty unlikely, but still...), then this will result in the captive portal
being inaccessible. To fix this support in NetworkManager (or any other network
management solution that does captive portal detection) is required, which
simply turns off DNSSEC during the captive portal detection, and resets it back
to the default (i.e. on) after captive portal authentication is complete.
It has fairly wide functionality now and the interface has been
stable for a while. It it a useful testing tool.
The name is changed to better indicate what it does.
This was used by the dkr logic, which is gone now, hence remove this too.
Should we need it one day again the git history never forgets...
Note that this only covers the JSON parser. The JSON generator used by
"journalctl -o json" remains, as its much much simpler and requires no
infrastructure except printf() and the most basic escaping.
Left-over unknown flags are printed numerically. Otherwise,
it wouldn't be known what bits are remaining without knowning
what the known bits are.
A test case is added to verify the flag printing code:
============== src/resolve/test-data/fake-caa.pkts ==============
google.com. IN CAA 0 issue "symantec.com"
google.com. IN CAA 128 issue "symantec.com"
-- Flags: critical
google.com. IN CAA 129 issue "symantec.com"
-- Flags: critical 1
google.com. IN CAA 22 issue "symantec.com"
-- Flags: 22
Packets are stored in a simple format:
<size> <packet-wire-format> <size> <packet-wire-format> ...
Packets for some example domains are dumped, to test rr code for various
record types. Currently:
A
AAAA
CAA
DNSKEY
LOC
MX
NS
NSEC
OPENPGPKEY
SOA
SPF
TXT
The hashing code is executed, but results are not checked.
Also build other tests in src/resolve only with --enable-resolve.
As kdbus won't land in the anticipated way, the bus-proxy is not needed in
its current form. It can be resurrected at any time thanks to the history,
but for now, let's remove it from the sources. If we'll have a similar tool
in the future, it will look quite differently anyway.
Note that stdio-bridge is still available. It was restored from a version
prior to f252ff17, and refactored to make use of the current APIs.
It's annoying to have the exact same function in three places.
It's stored in src/shared, but it's not added to the library to
avoid the dependency on libgcrypt.
The UEFI BIOS already hashes the contents of the loaded image, so the
initrd and the command line of the binary are recorded.
Because manually added LoadOptions are not taken into account, these
should be recorded also.
This patch logs and extends a TPM PCR register with the LoadOptions.
This feature can be enabled with configure --enable-tpm
The PCR register index can be specified with
configure --with-tpm-pcrindex=<NUM>
Let's add an extra-safety net and change UID/GID to the "systemd-coredump" user when processing coredumps from system
user. For coredumps of normal users we keep the current logic of processing the coredumps from the user id the coredump
was created under.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=87354
This reworks the coredumping logic so that the coredump handler invoked from the kernel only collects runtime data
about the crashed process, and then submits it for processing to a socket-activate coredump service, which extracts a
stacktrace and writes the coredump to disk.
This has a number of benefits: the disk IO and stack trace generation may take a substantial amount of resources, and
hence should better be managed by PID 1, so that resource management applies. This patch uses RuntimeMaxSec=, Nice=, OOMScoreAdjust=
and various sandboxing settings to ensure that the coredump handler doesn't take away unbounded resources from normally
priorized processes.
This logic is also nice since this makes sure the coredump processing and storage is delayed correctly until
/var/systemd/coredump is mounted and writable.
Fixes: #2286
Repeating those conditionals for every program is
annoying. Use a helper variable to avoid conditionals.
Also always add generated completion files to CLEANFILES.
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
Currently when journalctl is called with path to block device node we
add following match _KERNEL_DEVICE=b$MAJOR:$MINOR.
That is not sufficient to actually obtain logs about the disk because
dev_printk() kernel helper puts to /dev/kmsg information about the
device in following format, +$SUBSYSTEM:$ADDRESS,
e.g. "+pci:pci:0000:00:14.0".
Now we will walk upward the syspath and add match for every device in
format produced by dev_printk() as well as match for its device node if
it exists.
Let's make sure our poll() calls don't get interrupted where they shouldn't (SIGALRM, ...), but allow them to be
interrupted where they should (SIGINT, ...).
Fixes#1965
For the search domain logic the order is highly relevant, hence make sure when collecting the various search domains to
add them to an ordered set, so that the order between search domains of a specific link is retained.
Commit ab6f56debf made the change to allow building man pages even when disabled
with ./configure --disable-manpages. This works fine, as long as xsltproc is
present. If xsltproc is not present, the command to build a man page (obviously)
fails. Unfortnately it fails with a cryptic message '-o not found', because
$(XSLTPROC) is empty. Add a fallback, to use 'xsltproc' is $(XSLTPROC) is not
defined. This way we get a nice message:
make: xsltproc: Command not found
The tool resolves way more than just hosts, hence give it a more generic name. This should be safe, as the tool is
currently undocumented. Before we add documentation for it, let's get the name right.
This also moves the C source into src/resolve/ (from src/resolve-host/), since the old name is a misnomer now. Also,
since it links directly to many of the C files of resolved it really belongs into resolved's directory anyway.
