IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We canonicalize repeats that cover the whole range: "0:0:0/1" → "0:0:*". But
we'd also do "0:0:0/1,0" → "0:0:*,0", which we then refuse to parse. Thus,
first go throug the whole chain, and print a '*' and nothing else if any of the
components covers the whole range.
0..3 is not the same as 0..infinity, we need to check both ends of the range.
This logic was added in 3215e35c40, and back then
the field was called .value. .stop was added later and apparently wasn't taken
into account here.
Coverage data shows that we didn't test calendar_spec_next_usec() and
associated functions at all.
The input samples so far were only used until the first NUL. We take advantage
of that by using the part until the second NUL as the starting timestamp,
retaining backwards compatibility for how the first part is used.
Those long indentifiers make test output very wide, and they are ultimately
not very useful for humans to look at. Let's use some short string to identify
the test failure instead.
"meson test" uses a test name generated from the file name and those long names
cause the test log output to exceed terminal width which looks bad. Let's replace
some long names with more-meaningful names that actually say something about
the tests.
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.
The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
In cbcdcaaa0e ("Add support for conditions on the machines firmware")
a new Firmware= directive was added for .netdev and .network files.
While it was also documented to work on .link files, in actual fact the
support was missing. Add that one extra line to make it work, and also
update the fuzzer directives.
Add the "Isolated" parameter in the *.network file, e.g.,
[Bridge]
Isolated=true|false
When the Isolated parameter is true, traffic coming out of this port
will only be forward to other ports whose Isolated parameter is false.
When Isolated is not specified, the port uses the kernel default
setting (false).
The "Isolated" parameter was introduced in Linux 4.19.
See man bridge(8) for more details.
But even though the kernel and bridge/iproute2 recognize the "Isolated"
parameter, systemd-networkd did not have a way to set it.
to let them use reproducible identifiers, which should make it possible
to really use files copied from OSS-Fuzz to reproduce issues on
GHActions and locally. Prompted by https://github.com/systemd/systemd/pull/22365
Turns out that part of systemd isn't covered by any fuzz targets and
that's not ideal considering that it parses data sent remotely. The
fuzzer triggers an infinite loop in lease_parse_routes as soon as it
starts so it seems to be working :-)
```
INFO: Running with entropic power schedule (0xFF, 100).
INFO: Seed: 23620602
INFO: Loaded 2 modules (182073 inline 8-bit counters): 176548 [0x7fdf511fc8d0, 0x7fdf51227a74), 5525 [0x5f6ef0, 0x5f8485),
INFO: Loaded 2 PC tables (182073 PCs): 176548 [0x7fdf51227a78,0x7fdf514d94b8), 5525 [0x5f8488,0x60ddd8),
./build/fuzz-dhcp-client: Running 1 inputs 1 time(s) each.
Running: test/fuzz/fuzz-dhcp-client/timeout-ed34161922c7075c4773f2ada3dee8685d220980
ALARM: working on the last Unit for 31 seconds
and the timeout value is 30 (use -timeout=N to change)
==80731== ERROR: libFuzzer: timeout after 31 seconds
#0 0x51b32e in __sanitizer_print_stack_trace (/home/vagrant/systemd/build/fuzz-dhcp-client+0x51b32e)
#1 0x4689e9 in fuzzer::PrintStackTrace() (/home/vagrant/systemd/build/fuzz-dhcp-client+0x4689e9)
#2 0x44a0f4 in fuzzer::Fuzzer::StaticAlarmCallback() (/home/vagrant/systemd/build/fuzz-dhcp-client+0x44a0f4)
#3 0x7fdf4f8b474f (/lib64/libc.so.6+0x4274f)
#4 0x465fee in __sanitizer_cov_trace_const_cmp4 (/home/vagrant/systemd/build/fuzz-dhcp-client+0x465fee)
#5 0x57eee5 in lease_parse_routes /home/vagrant/systemd/build/../src/libsystemd-network/sd-dhcp-lease.c:495:23
#6 0x57baf3 in dhcp_lease_parse_options /home/vagrant/systemd/build/../src/libsystemd-network/sd-dhcp-lease.c:701:21
#7 0x572450 in parse_options /home/vagrant/systemd/build/../src/libsystemd-network/dhcp-option.c:348:33
#8 0x571cea in dhcp_option_parse /home/vagrant/systemd/build/../src/libsystemd-network/dhcp-option.c:381:21
#9 0x559a01 in client_handle_offer /home/vagrant/systemd/build/../src/libsystemd-network/sd-dhcp-client.c:1543:13
#10 0x5592bd in LLVMFuzzerTestOneInput /home/vagrant/systemd/build/../src/libsystemd-network/fuzz-dhcp-client.c:78:9
#11 0x44a379 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) (/home/vagrant/systemd/build/fuzz-dhcp-client+0x44a379)
#12 0x42ae1f in fuzzer::RunOneTest(fuzzer::Fuzzer*, char const*, unsigned long) (/home/vagrant/systemd/build/fuzz-dhcp-client+0x42ae1f)
#13 0x432ade in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) (/home/vagrant/systemd/build/fuzz-dhcp-client+0x432ade)
#14 0x421f86 in main (/home/vagrant/systemd/build/fuzz-dhcp-client+0x421f86)
#15 0x7fdf4f89f55f in __libc_start_call_main (/lib64/libc.so.6+0x2d55f)
#16 0x7fdf4f89f60b in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x2d60b)
#17 0x421fd4 in _start (/home/vagrant/systemd/build/fuzz-dhcp-client+0x421fd4)
SUMMARY: libFuzzer: timeout
```
Add a new setting that follows the same principle and implementation
as ExtensionImages, but using directories as sources.
It will be used to implement support for extending portable images
with directories, since portable services can already use a directory
as root.
No need to invoke ls when we are just interested in file names.
Also, the cd to source root makes the output identical to
"git ls-files" (relative instead of absolute paths).