IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Kernel 4.1 separated the tracing system from the debugfs,
actual documentation already points to a different path
that needs this new mount to exist.
the old sysfs path will still be an automount in the debugfs,
created by the kernel (for now).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
If we have exit on idle, then operations such as "journalctl
--namespace=foo --rotate" should work even if the journal daemon is
currently not running.
(Note that we don't do activation by varlink for the main instance of
journald, I am not sure the deadlocks it might introduce are worth it)
This makes things a bit simpler and the build a bit faster, because we don't
have to rewrite files to do the trivial substitution. @rootbindir@ is always in
our internal $PATH that we use for non-absolute paths, so there should be no
functional change.
Devices referred to by `DeviceAllow=` sandboxing are resolved into their
corresponding major numbers when the unit is loaded by looking at
`/proc/devices`. If a reference is made to a device which is not yet
available, the `DeviceAllow` is ignored and the unit's processes cannot
access that device.
In both logind and nspawn, we have `DeviceAllow=` lines, and `modprobe`
in `ExecStartPre=` to load some kernel modules. Those kernel modules
cause device nodes to become available when they are loaded: the device
nodes may not exist when the unit itself is loaded. This means that the
unit's processes will not be able to access the device since the
`DeviceAllow=` will have been resolved earlier and denied it.
One way to fix this would be to re-evaluate the available devices and
re-apply the policy to the cgroup, but this cannot work atomically on
cgroupsv1. So we fall back to a second approach: instead of running
`modprobe` via `ExecStartPre`, we move this out to a separate unit and
order it before the units which want the module.
Closes#14322.
Fixes: #13943.
This reverts commit 07125d24ee.
In contrast to what is claimed in #13396 dbus-broker apparently does
care for the service file to be around, and otherwise will claim
"Service Not Activatable" in the time between systemd starting up the
broker and connecting to it, which the stub service file is supposed to
make go away.
Reverting this makes the integration test suite pass again on host with
dbus-broker (i.e. current Fedora desktop).
Tested with dbus-broker-21-6.fc31.x86_64.
This option is an indication for PID1 that the entry in crypttab is handled by
initrd only and therefore it shouldn't interfer during the usual start-up and
shutdown process.
It should be primarily used with the encrypted device containing the root FS as
we want to keep it (and thus its encrypted device) until the very end of the
shutdown process, i.e. when initrd takes over.
This option is the counterpart of "x-initrd.mount" used in fstab.
Note that the slice containing the cryptsetup services also needs to drop the
usual shutdown dependencies as it's required by the cryptsetup services.
Fixes: #14224
This fixes the following problem:
> At the very end of the boot, just after the first user logs in
> (usually using sddm / X) I get the following messages in my logs:
> Nov 18 07:02:33 samd dbus-daemon[2879]: [session uid=1000 pid=2877] Activated service 'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1 exited with status 1
> Nov 18 07:02:33 samd dbus-daemon[2879]: [session uid=1000 pid=2877] Activated service 'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1 exited with status 1
These messages are caused by the "stub" service files that systemd
installs. It installed them because early versions of systemd activation
required them to exist.
Since dbus 1.11.0, a dbus-daemon that is run with --systemd-activation
automatically assumes that o.fd.systemd1 is an activatable
service. As a result, with a new enough dbus version,
/usr/share/dbus-1/services/org.freedesktop.systemd1.service and
/usr/share/dbus-1/system-services/org.freedesktop.systemd1.service should
become unnecessary, and they can be removed.
dbus 1.11.0 was released 2015-12-02.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914015
This patch introduces the systemd pstore service which will archive the
contents of the Linux persistent storage filesystem, pstore, to other storage,
thus preserving the existing information contained in the pstore, and clearing
pstore storage for future error events.
Linux provides a persistent storage file system, pstore[1], that can store
error records when the kernel dies (or reboots or powers-off). These records in
turn can be referenced to debug kernel problems (currently the kernel stuffs
the tail of the dmesg, which also contains a stack backtrace, into pstore).
The pstore file system supports a variety of backends that map onto persistent
storage, such as the ACPI ERST[2, Section 18.5 Error Serialization] and UEFI
variables[3 Appendix N Common Platform Error Record]. The pstore backends
typically offer a relatively small amount of persistent storage, e.g. 64KiB,
which can quickly fill up and thus prevent subsequent kernel crashes from
recording errors. Thus there is a need to monitor and extract the pstore
contents so that future kernel problems can also record information in the
pstore.
The pstore service is independent of the kdump service. In cloud environments
specifically, host and guest filesystems are on remote filesystems (eg. iSCSI
or NFS), thus kdump relies [implicitly and/or explicitly] upon proper operation
of networking software *and* hardware *and* infrastructure. Thus it may not be
possible to capture a kernel coredump to a file since writes over the network
may not be possible.
The pstore backend, on the other hand, is completely local and provides a path
to store error records which will survive a reboot and aid in post-mortem
debugging.
Usage Notes:
This tool moves files from /sys/fs/pstore into /var/lib/systemd/pstore.
To enable kernel recording of error records into pstore, one must either pass
crash_kexec_post_notifiers[4] to the kernel command line or enable via 'echo Y
> /sys/module/kernel/parameters/crash_kexec_post_notifiers'. This option
invokes the recording of errors into pstore *before* an attempt to kexec/kdump
on a kernel crash.
Optionally, to record reboots and shutdowns in the pstore, one can either pass
the printk.always_kmsg_dump[4] to the kernel command line or enable via 'echo Y >
/sys/module/printk/parameters/always_kmsg_dump'. This option enables code on the
shutdown path to record information via pstore.
This pstore service is a oneshot service. When run, the service invokes
systemd-pstore which is a tool that performs the following:
- reads the pstore.conf configuration file
- collects the lists of files in the pstore (eg. /sys/fs/pstore)
- for certain file types (eg. dmesg) a handler is invoked
- for all other files, the file is moved from pstore
- In the case of dmesg handler, final processing occurs as such:
- files processed in reverse lexigraphical order to faciliate
reconstruction of original dmesg
- the filename is examined to determine which dmesg it is a part
- the file is appended to the reconstructed dmesg
For example, the following pstore contents:
root@vm356:~# ls -al /sys/fs/pstore
total 0
drwxr-x--- 2 root root 0 May 9 09:50 .
drwxr-xr-x 7 root root 0 May 9 09:50 ..
-r--r--r-- 1 root root 1610 May 9 09:49 dmesg-efi-155741337601001
-r--r--r-- 1 root root 1778 May 9 09:49 dmesg-efi-155741337602001
-r--r--r-- 1 root root 1726 May 9 09:49 dmesg-efi-155741337603001
-r--r--r-- 1 root root 1746 May 9 09:49 dmesg-efi-155741337604001
-r--r--r-- 1 root root 1686 May 9 09:49 dmesg-efi-155741337605001
-r--r--r-- 1 root root 1690 May 9 09:49 dmesg-efi-155741337606001
-r--r--r-- 1 root root 1775 May 9 09:49 dmesg-efi-155741337607001
-r--r--r-- 1 root root 1811 May 9 09:49 dmesg-efi-155741337608001
-r--r--r-- 1 root root 1817 May 9 09:49 dmesg-efi-155741337609001
-r--r--r-- 1 root root 1795 May 9 09:49 dmesg-efi-155741337710001
-r--r--r-- 1 root root 1770 May 9 09:49 dmesg-efi-155741337711001
-r--r--r-- 1 root root 1796 May 9 09:49 dmesg-efi-155741337712001
-r--r--r-- 1 root root 1787 May 9 09:49 dmesg-efi-155741337713001
-r--r--r-- 1 root root 1808 May 9 09:49 dmesg-efi-155741337714001
-r--r--r-- 1 root root 1754 May 9 09:49 dmesg-efi-155741337715001
results in the following:
root@vm356:~# ls -al /var/lib/systemd/pstore/155741337/
total 92
drwxr-xr-x 2 root root 4096 May 9 09:50 .
drwxr-xr-x 4 root root 40 May 9 09:50 ..
-rw-r--r-- 1 root root 1610 May 9 09:50 dmesg-efi-155741337601001
-rw-r--r-- 1 root root 1778 May 9 09:50 dmesg-efi-155741337602001
-rw-r--r-- 1 root root 1726 May 9 09:50 dmesg-efi-155741337603001
-rw-r--r-- 1 root root 1746 May 9 09:50 dmesg-efi-155741337604001
-rw-r--r-- 1 root root 1686 May 9 09:50 dmesg-efi-155741337605001
-rw-r--r-- 1 root root 1690 May 9 09:50 dmesg-efi-155741337606001
-rw-r--r-- 1 root root 1775 May 9 09:50 dmesg-efi-155741337607001
-rw-r--r-- 1 root root 1811 May 9 09:50 dmesg-efi-155741337608001
-rw-r--r-- 1 root root 1817 May 9 09:50 dmesg-efi-155741337609001
-rw-r--r-- 1 root root 1795 May 9 09:50 dmesg-efi-155741337710001
-rw-r--r-- 1 root root 1770 May 9 09:50 dmesg-efi-155741337711001
-rw-r--r-- 1 root root 1796 May 9 09:50 dmesg-efi-155741337712001
-rw-r--r-- 1 root root 1787 May 9 09:50 dmesg-efi-155741337713001
-rw-r--r-- 1 root root 1808 May 9 09:50 dmesg-efi-155741337714001
-rw-r--r-- 1 root root 1754 May 9 09:50 dmesg-efi-155741337715001
-rw-r--r-- 1 root root 26754 May 9 09:50 dmesg.txt
where dmesg.txt is reconstructed from the group of related
dmesg-efi-155741337* files.
Configuration file:
The pstore.conf configuration file has four settings, described below.
- Storage : one of "none", "external", or "journal". With "none", this
tool leaves the contents of pstore untouched. With "external", the
contents of the pstore are moved into the /var/lib/systemd/pstore,
as well as logged into the journal. With "journal", the contents of
the pstore are recorded only in the systemd journal. The default is
"external".
- Unlink : is a boolean. When "true", the default, then files in the
pstore are removed once processed. When "false", processing of the
pstore occurs normally, but the pstore files remain.
References:
[1] "Persistent storage for a kernel's dying breath",
March 23, 2011.
https://lwn.net/Articles/434821/
[2] "Advanced Configuration and Power Interface Specification",
version 6.2, May 2017.
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
[3] "Unified Extensible Firmware Interface Specification",
version 2.8, March 2019.
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
[4] "The kernel’s command-line parameters",
https://static.lwn.net/kerneldoc/admin-guide/kernel-parameters.html
time-sync.target is supposed to indicate system clock is synchronized
with a remote clock, but as used through 241 it only provided a system
clock that was updated based on a locally-maintained timestamp. Systems
that are powered off for extended periods would not come up with
accurate time.
Retain the existing behavior using a new time-set.target leaving
time-sync.target for cases where accuracy is required.
Closes#8861
This patch was initially prompted by a report on a Fedora update [1], that the
upgrade causes systemd-resolved.service and systemd-networkd.service to be
re-enabled. We generally want to preserve the enablement of all services during
upgrades, so a reset like this is not expected.
Both services declare two symlinks in their [Install] sections, for their dbus
names and for multi-user.target.wants/. It turns out that both services were
only partially enabled, because their dbus unit symlinks
/etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were
created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were
not. This means that the units could be activated by dbus, but not in usual
fashion using systemctl start. Our tools make it rather hard to figure out when
something like this happens, and it is definitely an area for improvement on its
own. The symlink in .wants/ was filtered out by during packaging, but the dbus
symlink was left in (I assume by mistake).
Let's simplify things by not creating the symlinks statically during 'ninja
install'. This means that the units shipped by systemd have to be enabled in
the usual fashion, which in turns means that [Install] section and presets
become the "single source of truth" and we don't have two sets of conflicting
configuration.
Let's consider a few cases:
- developer: a developer installs systemd from git on a running system, and they
don't want the installation to reset enablement of anything. So this change is
either positive for them, or has no effect (if they have everything at
defaults).
- package creation: we want to create symlinks using 'preset-all' and 'preset'
on upgraded packages, we don't want to have any static symlinks. This change
will remove the need to filter out symlinks in packaging and of course fix
the original report.
- installation of systemd from scratch: this change means that without
'preset-all' the system will not be functional. This case could be affected
negatively by this change, but I think it's enough of a corner case to accept
this. In practice I expect people to build a package, not installl directly
into the file system, so this might not even matter in practice.
Creating those symlinks was probably the right thing in the beginning, but
nowadays the preset system is very well established and people expect it to
be honoured. Ignoring the presets and doing static configuration is not welcome
anymore.
Note: during package installation, either 'preset-all' or 'preset getty@.service
machines.target remote-cryptsetup.target remote-fs.target
systemd-networkd.service systemd-resolved.service
systemd-networkd-wait-online.service systemd-timesyncd.service' should be called.
[1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
This is might be useful in some cases, but it's primarily an example for
a boot check service that can be plugged before boot-complete.target.
It's disabled by default.
All it does is check whether the failed unit count is zero
This is the counterpiece to the boot counting implemented in
systemd-boot: if a boot is detected as successful we mark drop the
counter again from the booted snippet or kernel image.
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
Explicit systemctl calls remain in systemd-halt.service and the system
systemd-exit.service. To convert systemd-halt, we'd need to add
SuccessAction=halt-force. Halting doesn't make much sense, so let's just
leave that is. systemd-exit.service will be converted in the next commit.
systemd offline-updates allows dropping multiple system update units
to be added to system-update.target.wants.
As documented in systemd.offline-updates(7) only 1 of these units
should actually be active (based on the /system-update symlink) and
when that unit is done it should reboot the system.
In some cases it is desirable to run a unit whenever booting in
offline-updates mode indepedent of which update unit is going to
handle the update. One example of this is integration with bootloader
code which checks if the previous boot was succesful.
Since the active unit will reboot the system when it is done, there
is no guarantee that adding such a unit to system-update.target.wants
will get it executed always.
This commit adds a system-update-pre.target which can be used for
units which should always run when booting in offline-updates mode.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
Unfortunately this needs a new binary to do the mount because there's just
too many special steps to outsource this to systemd-mount:
- EPERM needs to be treated specially
- UserRuntimeDir= setting must be obeyed
- SELinux label must be adjusted
This allows user@.service to be started independently of logind.
So 'systemctl start user@nnn' will start the user manager for user nnn.
Logind will start it too when the user logs in, and will stop it (unless
lingering is enabled) when the user logs out.
Fixes#7339.
This removes the UserTasksMax= setting in logind.conf. Instead, the generic
TasksMax= setting on the slice should be used. Instead of a transient unit we
use a drop-in to tweak the default definition of a .slice. It's better to use
the normal unit mechanisms instead of creating units on the fly. This will also
make it easier to start user@.service independently of logind, or set
additional settings like MemoryMax= for user slices.
The setting in logind is removed, because otherwise we would have two sources
of "truth": the slice on disk and the logind config. Instead of trying to
coordinate those two sources of configuration (and maintainer overrides to
both), let's just convert to the new one fully.
Right now now automatic transition mechanism is provided. logind will emit a
hint when it encounters the setting, but otherwise it will be ignored.
Fixes#2556.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
`-.mount` is placed in `system.slice`, and hence depends on it.
`-.mount` is always active and can never be stopped. Therefore the same
should be true of `system.slice`.
Synthesize it as perpetual (unless systemd is running as a user manager).
Notice we also drop `Before=slices.target` as unnecessary.
AFAICS the justification for `perpetual` is to provide extra protection
against unintentionally stopping every single service. So adding
system.slice to the perpetual units is perfectly consistent.
I don't expect this will (or can) fix any other problem. And the
`perpetual` protection probably isn't formal enough to spend much time
thinking about. I've just noticed this a couple of times, as something
that looks strange.
Might be a bit surprising that we have user.slice on-disk but not
system.slice, but I think it's ok. `systemctl status system.slice` will
still point you towards `man systemd.special`. The only detail is that the
system slice disables `DefaultDependencies`. If you're worrying about how
system shutdown works when you read `man systemd.slice`, I think it is not
too hard to guess that system.slice might do this:
> Only slice units involved with early boot
> or late system shutdown should disable this option
(Docs are great. I really appreciate the systemd ones).
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
remote-cryptsetup-pre.target was designed as an active unit (that pulls in
network-online.target), the opposite of remote-fs-pre.target (a passive unit,
with individual provider services ordering itself before it and pulling it in,
for example iscsi.service and nfs-client.target).
To make remote-cryptsetup-pre.target really work, those services should be
ordered before it too. But this would require updates to all those services,
not just changes from systemd side.
But the requirements for remote-fs-pre.target and remote-cryptset-pre.target
are fairly similar (e.g. iscsi devices can certainly be used for both), so
let's reuse remote-fs-pre.target also for remote cryptsetup units. This loses
a bit of flexibility, but does away with the requirement for various provider
services to know about remote-cryptsetup-pre.target.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
The pair is similar to remote-fs.target and remote-fs-pre.target. Any
cryptsetup devices which require network shall be ordered after
remote-cryptsetup-pre.target and before remote-cryptsetup.target.
