IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is useful for distributions, where the stability of interface names should
be preseved after an upgrade of systemd. So when some specific release of the
distro is made available, systemd defaults to the latest & greatest naming
scheme, and subsequent updates set the same default. This default may still
be overriden through the kernel and env var options.
A special value "latest" is also allowed. Without a specific name, it is harder
to verride from meson. In case of 'combo' options, meson reads the default
during the initial configuration, and "remembers" this choice. When systemd is
updated, old build/ directories could keep the old default, which would be
annoying. Hence, "latest" is introduced to make it explicit, yet follow the
upstream. This is actually useful for the user too, because it may be used
as an override, without having to actually specify a version.
add new "systemd-run-generator" for running arbitrary commands from the kernel command line as system services using the "systemd.run=" kernel command line switch
This is really useful for running commands like this:
# systemd-run -i someimage.raw -b systemd.run='"some command line"'
This will now run the command line inside a small Type=oneshot service
and even propagate the exit code of the command back to the parent. And
all that with the full system booted up.
By default this causes the system to shutdown right after the command
completed, but this can be tweaked with systemd.run_success_action= and
systemd.run_failure_action=.
Note that when used in VMs the exit status can of course not be
propagate, as VMs don't really know a concept for that.
Fixes: #2728
This is also supposed to be preparation for doing #10234 eventually,
where a very similar operation is requested: instead of importing a tree
to /var/lib/machines it would need to be imported into
/var/lib/portables/.
This doesn't have much effect on the final build, because we link libbasic.a
into libsystemd-shared.so, so in the end, all the object built from basic/
end up in libsystemd-shared. And when the static library is linked into binaries,
any objects that are included in it but are not used are trimmed. Hence, the
size of output artifacts doesn't change:
$ du -sb /var/tmp/inst*
54181861 /var/tmp/inst1 (old)
54207441 /var/tmp/inst1s (old split-usr)
54182477 /var/tmp/inst2 (new)
54208041 /var/tmp/inst2s (new split-usr)
(The negligible change in size is because libsystemd-shared.so is bigger
by a few hundred bytes. I guess it's because symbols are named differently
or something like that.)
The effect is on the build process, in particular partial builds. This change
effectively moves the requirements on some build steps toward the leaves of the
dependency tree. Two effects:
- when building items that do not depend on libsystemd-shared, we
build less stuff for libbasic.a (which wouldn't be used anyway,
so it's a net win).
- when building items that do depend on libshared, we reduce libbasic.a as a
synchronization point, possibly allowing better parallelism.
Method:
1. copy list of .h files from src/basic/meson.build to /tmp/basic
2. $ for i in $(grep '.h$' /tmp/basic); do echo $i; git --no-pager grep "include \"$i\"" src/basic/ 'src/lib*' 'src/nss-*' 'src/journal/sd-journal.c' |grep -v "${i%.h}.c";echo ;done | less
Fixes#4549.
People want to be able to redefine the prefixes relative to which the other
variables are defined. Something like
pkgconf --define-variable=prefix=/home/user/installpath --variable=systemdsystemunitdir systemd
I'm not convinced that this entirely useful, because the installed systemd will
not look at those paths, but maybe it's OK as an alternative type of $DESTDIR.
This has been requested a few times over the years, so let's just provide this.
I thought this would be more complicated, since we allow all kinds of directories
to be overrides in the compilation configuration. But it turns out that all the
directories defined in systemd.pc are relative to three prefixes:
$prefix, $rootprefix, and $sysconfdir. So this patch adds $rootprefix and $sysconfdir
to the .pc file and then changes the subsequent definitions in the .pc file to use
them. In the end we define each path twice using the same rules: once in meson.build
and once in the .pc file.
Without overrides:
$ for i in $(pkgconf --with-path=build/src/core systemd --print-variables); do
echo -n "$i = "; pkgconf --with-path=$PWD/build/src/core --variable=$i systemd
done
containeruidbasemax = 1878982656
containeruidbasemin = 524288
dynamicuidmax = 65519
dynamicuidmin = 61184
systemgidmax = 999
systemuidmax = 999
catalogdir = /usr/lib/systemd/catalog
modulesloaddir = /usr/lib/modules-load.d
binfmtdir = /usr/lib/binfmt.d
sysctldir = /usr/lib/sysctl.d
sysusersdir = /usr/lib/sysusers.d
tmpfilesdir = /usr/lib/tmpfiles.d
systemdshutdowndir = /usr/lib/systemd/system-shutdown
systemdsleepdir = /usr/lib/systemd/system-sleep
systemdusergeneratordir = /usr/lib/systemd/user-generators
systemdsystemgeneratordir = /usr/lib/systemd/system-generators
systemduserunitpath = /etc/systemd/user:/etc/systemd/user:/run/systemd/user:/usr/local/lib/systemd/user:/usr/local/share/systemd/user:/usr/lib/systemd/user:/usr/lib/systemd/user:/usr/share/systemd/user
systemdsystemunitpath = /etc/systemd/system:/etc/systemd/system:/run/systemd/system:/usr/local/lib/systemd/system:/usr/lib/systemd/system:/usr/lib/systemd/system:/lib/systemd/system
systemduserconfdir = /etc/systemd/user
systemdsystemconfdir = /etc/systemd/system
systemduserpresetdir = /usr/lib/systemd/user-preset
systemduserunitdir = /usr/lib/systemd/user
systemdsystempresetdir = /usr/lib/systemd/system-preset
systemdsystemunitdir = /usr/lib/systemd/system
systemdutildir = /usr/lib/systemd
sysconfdir = /etc
rootprefix = /usr
prefix = /usr
pcfiledir = /usr/share/pkgconfig
With overrides:
$ for i in $(pkgconf --with-path=build/src/core systemd --print-variables); do
echo -n "$i = "; pkgconf --with-path=$PWD/build/src/core \
--define-variable=prefix=/PREFIX \
--define-variable=rootprefix=/ROOTPREFIX \
--define-variable=sysconfdir=/SYSCONF --variable=$i systemd
done
containeruidbasemax = 1878982656
containeruidbasemin = 524288
dynamicuidmax = 65519
dynamicuidmin = 61184
systemgidmax = 999
systemuidmax = 999
catalogdir = /PREFIX/lib/systemd/catalog
modulesloaddir = /PREFIX/lib/modules-load.d
binfmtdir = /PREFIX/lib/binfmt.d
sysctldir = /PREFIX/lib/sysctl.d
sysusersdir = /PREFIX/lib/sysusers.d
tmpfilesdir = /PREFIX/lib/tmpfiles.d
systemdshutdowndir = /ROOTPREFIX/lib/systemd/system-shutdown
systemdsleepdir = /ROOTPREFIX/lib/systemd/system-sleep
systemdusergeneratordir = /PREFIX/lib/systemd/user-generators
systemdsystemgeneratordir = /ROOTPREFIX/lib/systemd/system-generators
systemduserunitpath = /SYSCONF/systemd/user:/etc/systemd/user:/run/systemd/user:/usr/local/lib/systemd/user:/usr/local/share/systemd/user:/PREFIX/lib/systemd/user:/usr/lib/systemd/user:/usr/share/systemd/user
systemdsystemunitpath = /SYSCONF/systemd/system:/etc/systemd/system:/run/systemd/system:/usr/local/lib/systemd/system:/ROOTPREFIX/lib/systemd/system:/usr/lib/systemd/system:/lib/systemd/system
systemduserconfdir = /SYSCONF/systemd/user
systemdsystemconfdir = /SYSCONF/systemd/system
systemduserpresetdir = /PREFIX/lib/systemd/user-preset
systemduserunitdir = /PREFIX/lib/systemd/user
systemdsystempresetdir = /ROOTPREFIX/lib/systemd/system-preset
systemdsystemunitdir = /ROOTPREFIX/lib/systemd/system
systemdutildir = /usr/lib/systemd
sysconfdir = /SYSCONF
rootprefix = /ROOTPREFIX
prefix = /PREFIX
pcfiledir = /usr/share/pkgconfig
(pkgconf doesn't provide a way to print all variables together with their definitions,
according to the man page. Disappointing.)
Assigning multiple variables in one line is no valid meson syntax.
Without this running meson with -Ddns-over-tls=false fails with:
meson.build:1191:8: ERROR: Tried to assign an invalid value to variable.
Fuzzers are just special tests anyways and without this, building with
'-Dtests=false' fails with:
.../src/fuzz/fuzz-main.c:20: undefined reference to `test_setup_logging'
lz4-r130 was released on May 29th, 2015. Let's drop the work-around for older
versions. In particular, we won't test any new code against those ancient
releases, so we shouldn't pretend they are supported.
This is might be useful in some cases, but it's primarily an example for
a boot check service that can be plugged before boot-complete.target.
It's disabled by default.
All it does is check whether the failed unit count is zero
This is the counterpiece to the boot counting implemented in
systemd-boot: if a boot is detected as successful we mark drop the
counter again from the booted snippet or kernel image.
After discussions with kernel folks, a system with memcg really
shouldn't need extra hard limits on file descriptors anymore, as they
are properly accounted for by memcg anyway. Hence, let's bump these
values to their maximums.
This also adds a build time option to turn thiss off, to cover those
users who do not want to use memcg.
I think this is a slightly cleaner approach than parsing the
configuration file at multiple places, as this way there's only a single
reload cycle for logind.conf, and that's systemd-logind.service's
runtime.
This means that logind and dbus become a requirement of
user-runtime-dir, but given that XDG_RUNTIME_DIR is not set anyway
without logind and dbus around this isn't really any limitation.
This also simplifies linking a bit as this means user-runtime-dir
doesn't have to link against any code of logind itself.
This reverts commit 56f56d5ad8.
This broke the compilation for coverity under travis. Our build script does
something like this:
$ CFLAGS='-D_Float128=long\ double -D_Float64=double -D_Float64x=long\ double -D_Float32=float -D_Float32x=double' meson cov-build -Dman=false
$ ninja -C build
...
[pid 27096] execve("/usr/bin/cc", ["/usr/bin/cc", "-D_Float128=long", "double", "-D_Float64=double", "-D_Float64x=long", "double", "-D_Float32=float", "-D_Float32x=double", "-E", "-dM", "-include", "linux/capability.h", "-include", "config.h", "-include", "../src/basic/missing.h", "-"], 0x55ab75ea4e80 /* 91 vars */) = 0
cc: error: double: No such file or directory
cc: error: double: No such file or directory
[pid 27096] +++ exited with 1 +++
I'm sure this could be fixed somehow, but since the original motivation for
56f56d5ad8 wasn't very strong, let's just revert
it as this seems to be the simplest solution.
Mempool use is enabled or disabled based on the mempool_use_allowed symbol that
is linked in.
Should fix assert crashes in external programs caused by #9792.
Replaces #10286.
v2:
- use two different source files instead of a gcc constructor
The raison d'etre for this program is printing machine-app-specific IDs. We
provide a library function for that, but not a convenient API. We can hardly
ask people to quickly hack their own C programs or call libsystemd through CFFI
in python or another scripting language if they just want to print an ID.
Verb 'new' was already available as 'journalctl --new-id128', but this makes
it more discoverable.
v2:
- rename binary to systemd-id128
- make --app-specific= into a switch that applies to boot-id and machine-id
318/365 fuzz-bus-message:crash-26bba7182dedc8848939931d9fcefcb7922f2e56:address OK 0.03 s
319/365 fuzz-bus-message:crash-29ed3c202e0ffade3cad42c8bbeb6cc68a21eb8e:address OK 0.03 s
320/365 fuzz-bus-message:crash-b88ad9ecf4aacf4a0caca5b5543953265367f084:address OK 0.03 s
321/365 fuzz-bus-message:crash-c1b37b4729b42c0c05b23cba4eed5d8102498a1e:address OK 0.03 s
322/365 fuzz-bus-message:crash-d8f3941c74219b4c03532c9b244d5ea539c61af5:address OK 0.03 s
323/365 fuzz-bus-message:crash-e1b811da5ca494e494b77c6bd8e1c2f2989425c5:address OK 0.03 s
324/365 fuzz-bus-message:leak-c09c0e2256d43bc5e2d02748c8d8760e7bc25d20:address OK 0.04 s
325/365 fuzz-bus-message:message1:address OK 0.03 s
326/365 fuzz-bus-message:timeout-08ee8f6446a4064db064e8e0b3d220147f7d0b5b:address OK 0.03 s
327/365 fuzz-dhcp-server:discover-existing:address OK 0.04 s
328/365 fuzz-dhcp-server:discover-new:address OK 0.03 s
329/365 fuzz-dhcp-server:release:address OK 0.04 s
330/365 fuzz-dhcp-server:request-existing:address OK 0.03 s
331/365 fuzz-dhcp-server:request-new:address OK 0.03 s
332/365 fuzz-dhcp-server:request-reboot:address OK 0.03 s
333/365 fuzz-dhcp-server:request-renew:address OK 0.03 s
334/365 fuzz-dns-packet:issue-7888:address OK 0.03 s
335/365 fuzz-dns-packet:oss-fuzz-5465:address OK 0.03 s
336/365 fuzz-journal-remote:crash-5a8f03d4c3a46fcded39527084f437e8e4b54b76:address OK 0.06 s
337/365 fuzz-journal-remote:crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45:address OK 0.04 s
338/365 fuzz-journal-remote:invalid-ts.txt:address OK 0.04 s
339/365 fuzz-journal-remote:oss-fuzz-8659:address OK 0.06 s
340/365 fuzz-journal-remote:oss-fuzz-8686:address OK 0.04 s
341/365 fuzz-journal-remote:sample.txt:address OK 0.07 s
342/365 fuzz-unit-file:directives.service:address OK 0.03 s
343/365 fuzz-unit-file:empty.scope:address OK 0.04 s
344/365 fuzz-unit-file:machine.slice:address OK 0.03 s
345/365 fuzz-unit-file:oss-fuzz-6884:address OK 0.05 s
346/365 fuzz-unit-file:oss-fuzz-6885:address OK 0.03 s
347/365 fuzz-unit-file:oss-fuzz-6886:address OK 0.04 s
348/365 fuzz-unit-file:oss-fuzz-6892:address OK 0.03 s
349/365 fuzz-unit-file:oss-fuzz-6897:address OK 0.05 s
350/365 fuzz-unit-file:oss-fuzz-6897-evverx:address OK 0.04 s
351/365 fuzz-unit-file:oss-fuzz-6908:address OK 0.05 s
352/365 fuzz-unit-file:oss-fuzz-6917:address OK 0.06 s
353/365 fuzz-unit-file:oss-fuzz-6977:address OK 0.08 s
354/365 fuzz-unit-file:oss-fuzz-6977-unminimized:address OK 0.10 s
355/365 fuzz-unit-file:oss-fuzz-7004:address OK 0.03 s
356/365 fuzz-unit-file:oss-fuzz-8064:address OK 0.03 s
357/365 fuzz-unit-file:oss-fuzz-8827:address OK 0.50 s
358/365 fuzz-unit-file:proc-sys-fs-binfmt_misc.automount:address OK 0.03 s
359/365 fuzz-unit-file:syslog.socket:address OK 0.03 s
360/365 fuzz-unit-file:systemd-ask-password-console.path:address OK 0.03 s
361/365 fuzz-unit-file:systemd-machined.service:address OK 0.03 s
362/365 fuzz-unit-file:systemd-resolved.service:address OK 0.03 s
363/365 fuzz-unit-file:systemd-tmpfiles-clean.timer:address OK 0.03 s
364/365 fuzz-unit-file:timers.target:address OK 0.03 s
365/365 fuzz-unit-file:var-lib-machines.mount:address OK 0.04 s
This gives us slightly nicer coverage in the normal test run.
When in a git repo, git ls-files is used to get a list of files known to git.
This mirrors what update-man-rules does for man files. Only looking at files
known to git makes it easier to not forget to commit the test file to git,
and also makes bisecting easier if some files are left in repo.
When outside of a git repo, we expect to be unpacked from a tarball, so just
using all files reported by ls is OK.
In the main meson.build file, .source_root() and .current_source_dir() are
equivalent, but it seems more appropriate to use .source_root() when we are appending
a path which is by design relative to repo root.
The justification is the same as for -Dvalgrind: setting config in
meson in this way is easier, because when the value is changed stuff
that should be rebuilt is rebuilt.
There isn't really much need to keep them separate. Anything which is a good
corpus entry can be used as a smoke test, and anything which which is a
regression test can just as well be inserted into the corpus.
The only functional difference from this patch (apart from different paths in
output) is that the regression tests are now zipped together with the rest of
the corpus.
$ meson configure build -Dslow-tests=true && ninja -C build test
...
307/325 fuzz-dns-packet:issue-7888:address OK 0.06 s
308/325 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
309/325 fuzz-journal-remote:crash-5a8f03d4c3a46fcded39527084f437e8e4b54b76:address OK 0.07 s
310/325 fuzz-journal-remote:crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45:address OK 0.05 s
311/325 fuzz-journal-remote:oss-fuzz-8659:address OK 0.05 s
312/325 fuzz-journal-remote:oss-fuzz-8686:address OK 0.07 s
313/325 fuzz-unit-file:oss-fuzz-6884:address OK 0.06 s
314/325 fuzz-unit-file:oss-fuzz-6885:address OK 0.05 s
315/325 fuzz-unit-file:oss-fuzz-6886:address OK 0.05 s
316/325 fuzz-unit-file:oss-fuzz-6892:address OK 0.05 s
317/325 fuzz-unit-file:oss-fuzz-6897:address OK 0.05 s
318/325 fuzz-unit-file:oss-fuzz-6897-evverx:address OK 0.06 s
319/325 fuzz-unit-file:oss-fuzz-6908:address OK 0.07 s
320/325 fuzz-unit-file:oss-fuzz-6917:address OK 0.07 s
321/325 fuzz-unit-file:oss-fuzz-6977:address OK 0.13 s
322/325 fuzz-unit-file:oss-fuzz-6977-unminimized:address OK 0.12 s
323/325 fuzz-unit-file:oss-fuzz-7004:address OK 0.05 s
324/325 fuzz-unit-file:oss-fuzz-8064:address OK 0.05 s
325/325 fuzz-unit-file:oss-fuzz-8827:address OK 0.52 s
Yes, there are still a lot of users of bzip2, but it's fallen out of
favour after LZMA/xz, which can compress a lot more and often
decompresses faster than bzip2 too.
Back in 08318a2c5a, value "false" was enabled for
'-Dtests=', but various tests were not conditionalized properly. So even with
-Dtests=false -Dslow-tests=false we'd run 120 tests. Let's make this consistent.
We would have a strange situation where after setting -Dslow-tests=true -Dtests=false
we'd get mostly the slow tests (plus some other ones which I'll fix in
subsequent commit). Let's simplify things by making -Dtests=false just
disable those tests too.
This makes it so that tests no longer need to know the absolute paths to the
source and build dirs, instead using the systemd-runtest.env file to get these
paths when running from the build tree.
Confirmed that test-catalog works on `ninja test`, when called standalone and
also when the environment file is not present, in which case it will use the
installed location under /usr/lib/systemd/catalog.
The location can now also be overridden for this test by setting the
$SYSTEMD_CATALOG_DIR environment variable.
This simplifies get_testdata_dir() to simply checking for an environment
variable, with an additional function to locate a systemd-runtest.env file in
the same directory as the test binary and reading environment variable
assignments from that file if it exists.
This makes it possible to:
- Run `ninja test` from the build dir and have it use ${srcdir}/test for
test unit definitions.
- Run a test directly, such as `build/test-execute` and have it locate
them correctly.
- Run installed tests (from systemd-tests package) and locate the test
units in the installed location (/usr/lib/systemd/tests/testdata), in
which case the absence of the systemd-runtest.env file will have
get_testdata_dir() use the installed location hardcoded into the
binaries.
Explicit setting of $SYSTEMD_TEST_DATA still overrides the contents of
systemd-runtest.env.
Starting with meson 0.46, it is able to detect these argument correctly.
See this commit in meson codebase for more details:
695b8f3a03
We already carry a requirement for meson_version : '>= 0.46', so we can be sure
our build system will include this commit.
Tested by building systemd using a cloned meson synced to the 0.46.0 tag,
confirmed the warnings were detected correctly in that case. The meson messages included this snippet:
> Compiler for C supports arguments -Wno-unused-parameter -Wunused-parameter: YES
> Compiler for C supports arguments -Wno-missing-field-initializers -Wmissing-field-initializers: YES
> Compiler for C supports arguments -Wno-unused-result -Wunused-result: YES
> Compiler for C supports arguments -Wno-format-signedness -Wformat-signedness: YES
> Compiler for C supports arguments -Wno-error=nonnull -Werror=nonnull: YES
> Compiler for C supports arguments -Wno-maybe-uninitialized -Wmaybe-uninitialized: YES
The docs/ directory is special in GitHub, since it can be used to serve GitHub
Pages from, so there's a benefit to switching to it in order to expose it
directly as a website.
Updated references to it from the documentations themselves, from the
CONTRIBUTING.md file and from Meson build files.
Compiler flag -Wmaybe-uninitialized is quite noisy and produces many false
positives, especially when optimization flags are enabled (tested gcc 8.2.1),
so let's just disable it in systemd build.
For example, with CFLAGS=-O2, the build produces 11 such warnings and the
default CFLAGS of Fedora's rpmbuild warns about it in 176 places. A look at a
sample of those shows that most are false positives, where the compiler just
can't figure it out correctly. (While fixing those would be nice, I'm not sure
it's a good use of our time.)
The noisy [-Wmaybe-uninitialized] warnings are not just an annoyance, since
they make it harder to spot warnings that indicate actual problems (such as
variable declared but not used.) Silencing those is beneficial, so that
contributors would see warnings where there are actually actionable problems,
so there's a better chance of having those issues addressed before a PR is
pushed.
Tested:
$ CFLAGS='-O2 -Wp,-D_FORTIFY_SOURCE=2' meson build/
$ ninja -C build/
(NOTE: -Wp,-D_FORTIFY_SOURCE=2 prevents [-Wstringop-truncation] warnings.)
With the commands above, the build will not produce any [-Wmaybe-uninitialized]
warnings (or any other warnings), which is not really the case before this commit.
Also tested with rpmbuild on Fedora, after this commit there are no warnings
produced in the build step.
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Meson does not care either way, so let's use the simpler syntax. And files()
already gives a list, so nesting this in a list wouldn't be necessary even
if meson did not flatten everything.
This provides basic OpenSSL support without optimizations like TCP Fast Open and TLS Session Tickets.
Notice only a single SSL library can be enabled at a time and therefore journald functions provided by GnuTLS will be disabled when using OpenSSL.
Fixes#9531
This bumps the minimum required version of meson to 0.45 and
python to 3.5, as integer type option is supported since meson-0.45
and meson-0.45 requires python-3.5.
This adds -Dnss-resolve= and -Dnss-mymachines= meson options.
By using this option, e.g., resolved can be built without nss-resolve.
When no nss modules are built, then test-nss is neither built.
Also, This changes the option name -Dmyhostname= to -Dnss-myhostname=
for consistency to other nss related options.
Closes#9596.
Using `getent' and `id' command in case of cross compiling does not
make much sense. This is because it is the host files that are checked.
Besides, in some restricted cross compilation environment, these two
command may not even be available. This is to avoid host comtamination.
So we should only check the validity using getent and id when not
cross compiling.
key_serial_t is defined in keyutil.h, which wasn't included in the header list
in the test, so the test always failed. We were always compiling stuff with
!HAVE_KEY_SERIAL_T.
We could try to add keyutil.h to the test, but then we'd have to first check if
it is available, which just doesn't seem worth the trouble.
key_serial_t should always be defined as int32_t. Let's keep the uncoditional
define, since repeated compatible typedefs are not a problem, and it allows us
to compile even if the header file is missing. If there's ever a change in the
definition, we'll have to adjust the code for the different type anyway, and
our compiler will tell us.
Using _GNU_SOURCE is better because that's how we include the headers in the
actual build, and some headers define different stuff when it is defined.
sys/stat.h for example defines 'struct statx' conditionally.
Starting with glibc 2.27.9000-36.fc29, include file sys/stat.h will have a
definition for struct statx, in which case include file linux/stat.h should be
avoided, in order to prevent a duplicate definition.
In file included from ../src/basic/missing.h:18,
from ../src/basic/util.h:28,
from ../src/basic/hashmap.h:10,
from ../src/shared/bus-util.h:12,
from ../src/libsystemd/sd-bus/bus-creds.c:11:
/usr/include/linux/stat.h:99:8: error: redefinition of ‘struct statx’
struct statx {
^~~~~
In file included from /usr/include/sys/stat.h:446,
from ../src/basic/util.h:19,
from ../src/basic/hashmap.h:10,
from ../src/shared/bus-util.h:12,
from ../src/libsystemd/sd-bus/bus-creds.c:11:
/usr/include/bits/statx.h:36:8: note: originally defined here
struct statx
^~~~~
Extend our meson.build to look for struct statx when only sys/stat.h is
included and, in that case, do not include linux/stat.h anymore.
Tested that systemd builds correctly when using a glibc version that includes a
definition for struct statx.
glibc Fedora RPM update:
28cb5d31fc
glibc upstream commit:
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=fd70af45528d59a00eb3190ef6706cb299488fcd
This fixes the following warning:
```
meson.build:1140: WARNING: Trying to compare values of different types (DependencyHolder, list) using !=.
The result of this is undefined and will become a hard error in a future Meson release.
```
Follow-up for f02582f69fe1e7663a87ba80bd4f90d5d23ee75f(#9410).
../src/test/test-sizeof.c: In function ‘main’:
../src/test/test-sizeof.c:70:24: error: result of ‘1 << 31’ requires 33 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
X = (1 << 31),
^~
cc1: some warnings being treated as errors
Follow-up for b05ecb8cad.
The primary motivation is to catch enum values created through a shift that is
too big:
../src/test/test-sizeof.c:26:29: error: left shift count >= width of type [-Werror=shift-count-overflow]
enum_with_shift = 1 << 32,
^~
cc1: some warnings being treated as errors
The compiler will now reject those.
This is an alternative to #9224.
We already allowed variables to be declared in the middle of a function
(whenever a new scope was opened), so this isn't such a big change. Sometimes
we would open a scope just to work around this prohibition.
But sometimes the code can be much clearer if the variable is declared
somewhere in the middle of a scope, in particular if the declaration is
combined with initialization or acquisition of some resources. So let's allow
this, but keep things in the old style, unless there's a good reason to move
the variable declaration to a different place.
Systemctl is special because it is required for many tasks that may need to
be performed when the system is not fully configured and/or partially
broken:
1. Installing/Uninstalling services during OS installs and upgrades
2. Shutting down the system
Therefore reduce the number of dependencies that systemctl pulls in, by
not linking to systemd-shared. This brings a bit of resilience to
systemctl (and its aliases shutdown, reboot, etc), by linking against
less external libraries.
Because this extra resilience comes at a cost of approximately 580 KB
extra space, this is done behind a meson build option.
This is in preparation to reusing the RemoteServer in other concepts.
I tried to keep changes to minimum:
- arg_* global variables are now passed as state in RemoteServer
- exported functions get the "journal_remote_" prefix
- some variables are renamed
In particular, there is an ugly global RemoveServer* variable. It was originally
added because µhttpd did not allow state to be passed to the callbacks. I'm not
sure if this has been remediated in µhttpd, but either way, this is not changed
here, the global variable is only renamed for clarity.
This makes it easier to link the nspawn implementation to the tests.
Right now this just means that nspawn-patch-uid.c is not compiled
twice, which is nice, but results in test-patch-uid being slightly bigger,
which is not nice. But in general, we should use convenience libs to
compile everything just once, as far as possible. Otherwise, once we
start compiling a few files here twice, and a few file there thrice, we
soon end up in a state where we are doing hundreds of extra compilations.
So let's do the "right" thing, even if is might not be more efficient.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
In https://github.com/systemd/systemd/pull/6561, `run_target`
was changed to `custom_target`, which inadvertently caused
relative paths to be passed to ctags due to
https://github.com/mesonbuild/meson/issues/3589.
The switch to `run_target` causes absolute paths to be
passed again and makes it easier to jump from file to
file, hopefully delaying the need to exit Vim :-)
Configuration through environment variable is inconvenient with meson, because
they cannot be convieniently changed and/or are not preserved during
reconfiguration (https://github.com/mesonbuild/meson/issues/1503).
This adds -Dvalgrind=true/false, which has the advantage that it can be set
at any time with meson configure -Dvalgrind=... and ninja will rebuild targets
as necessary. Additional minor advantages are better consistency with the
options for hashmap debugging, and typo avoidance with '#if' instead of '#ifdef'.
This means that when those targets are built, all the sources are built again,
instead of reusing the work done to create libbasic.a and other convenience static
libraries. It would be nice to not do this, but there seems to be no support in
our toolchain for joining multiple static libraries into one. When linking
a static library, any -l arguments are simply ignored by ar/gcc-ar, and .a
libraries given as positional arguments are copied verbatim into the archive
so they objects in them cannot be accessed.
https://stackoverflow.com/questions/2157629/linking-static-libraries-to-other-static-libraries
suggests either unzipping all the archives and putting them back togather,
or using a linker script. Unzipping and zipping back together seems ugly.
The other option is not very nice. The linker script language does not
allow "+" to appear in the filenames, and filenames that meson generates
use that, so files would have to be renamed before a linker script was used.
And we would have to generate the linker script on the fly. Either way, this
doesn't seem attractive. Since those static libraries are a niche use case,
it seems reasonable to just go with the easiest and safest solution and
recompile all the source files. Thanks to ccache, this is probably almost as
cheap as actually reusing the convenience .a libraries.
test-libsystemd-sym.c and test-libudev-sym.c compile fine with the generated
static libs, so it seems that they indeed provide all the symbols they should.
This fixes the following warning with clang and meson-0.46.0,
```
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-typedef-redefinition: YES
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-gnu-variable-sized-type-not-at-end: YES
```
Unfortunately this needs a new binary to do the mount because there's just
too many special steps to outsource this to systemd-mount:
- EPERM needs to be treated specially
- UserRuntimeDir= setting must be obeyed
- SELinux label must be adjusted
This allows user@.service to be started independently of logind.
So 'systemctl start user@nnn' will start the user manager for user nnn.
Logind will start it too when the user logs in, and will stop it (unless
lingering is enabled) when the user logs out.
Fixes#7339.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Use `systemctl --user --force exit` to implement the systemd-exit
user service.
This removes our dependence on an external `kill` binary and the
concerns about whether they recognize SIGRTMIN+n by name or what their
interpretation of SIGRTMIN is.
Tested: `systemctl --user start systemd-exit.service` kills the
`systemd --user` instance for my user.
This is analogous to 8d3ae2bd4c, except that now
src/core/umount.c not src/core/mount.c is converted.
Might help with https://bugzilla.redhat.com/show_bug.cgi?id=1554943, or not.
In the patch, mnt_free_tablep and mnt_free_iterp are declared twice. It'd
be nicer to define them just once in mount-setup.h, but then libmount.h would
have to be included there. libmount.h seems to be buggy, and declares some
defines which break other headers, and working around this is more pain than
the two duplicate lines. So let's live with the duplication for now.
This fixes memleak of MountPoint in mount_points_list_get() on error, not that
it matters any.
We currently have just one sanitizer for tests, asan, but we may add more in
the future. So let's keep the loop over the sanitizers in meson.build, but
just enable all regression cases under all sanitizers. If it fails under one
of them, it might fail under a different one.
In subsequent commits I'll add test cases which might not fail under asan,
but it's good to commit them for future use.
The test names are made more verbose:
256/257 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
257/257 fuzz-dns-packet:issue-7888:address OK 0.03 s
meson.build:2907: WARNING: Trying to compare values of different types (bool, str) using ==.
The result of this is undefined and will become a hard error in a future Meson release.
This turns resolve-tool into a multi-call binary. When invoked as
"resolvconf" it provides minimal compatibility with the resolvconf(8)
tool of various distributions (and FreeBSD as it appears).
This new interface understands to varying degrees features of the two
major implementations of resolvconf(8): Debian's original one and
"openresolv". Specifically:
Fully supported:
-a -d (supported by all implementations)
-f (introduced by openresolv)
Somewhat supported:
-x (introduced by openresolv, mapped to a '~.' domain entry)
Unsupported and ignored:
-m -p (introduced by openresolv, not really necessary for us)
Unsupported and resulting in failure:
-u (supported by all other implementations)
-I -i -l -R -r -v -V
(all introduced by openresolv)
--enable-updates --disable-updates --updates-are-enabled
(specific to Debian's implementation)
Of course, resolvconf(8) is a tool with multiple backends, in our
implementation systemd-resolved is the only backend.
Fixes: #7202
Follow-up for ba7f4ae617.
By default, we detect if the real root has a separate /usr/sbin directory, but
this can be overrides with -Dsplit-bin=true|false. The check assumes that
/usr/sbin is split if it is not a symlink, so it'll return a false negative
with some more complicated setups. But that's OK, in those cases this should be
configured explicitly.
This will copy the structure of the directories in the root file system to
$DESTDIR. If a directory is a directory in $DESTDIR but a symlink in the root
file system, this script will fail. This means that it's not possible to reuse
a $DESTDIR from between ba7f4ae61 and this patch.
I figure sooneror later we'll have more of these docs, hence let's give
them a clean place to be.
This leaves NEWS and README/README.md as well as the LICENSE texts in
the root directory of the project since that appears to be customary for
Free Software projects.
There isn't much difference, but in general we prefer to use the standard
functions. glibc provides reallocarray since version 2.26.
I moved explicit_bzero is configure test to the bottom, so that the two stdlib
functions are at the bottom.
The Linux kernel exposes the birth time now for files through statx()
hence make use of it where available. We keep the xattr logic in place
for this however, since only a subset of file systems on Linux currently
expose the birth time. NFS and tmpfs for example do not support it. OTOH
there are other file systems that do support the birth time but might
not support xattrs (smb…), hence make the best of the two, in particular
in order to deal with journal files copied between file system types and
to maintain compatibility with older file systems that are updated to
newer version of the file system.
Apply defaults for system_{uid,gid}_max even if the /etc/login.defs file
doesn't exist (e.g. in Clear Linux with no changes).
awk returns an empty string in case the file doesn't exist, causing meson to
fail in to_int(). So set the default if output is empty. This makes the BEGIN{}
blocks unnecessary, so remove them.
The single quote working with multiple lines is likely to be unintended. With
current versions of meson, it also causes error messages after it to report the
wrong line number. Use the documented syntax instead.
I used 'tags' before because this way we avoided a unnecessary
line about 'env' detection. But we cannot use 'env' in test(), so
previous commit added 'env' detection. We might just as well use
it in custom_target().
This is a bit painful because a separate build of systemd is necessary. The
tests are guarded by tests!=false and slow-tests==true. Running them is not
slow, but compilation certainly is. If this proves unwieldy, we can add a
separate option controlling those builds later.
The build for each sanitizer has its own directory, and we build all fuzzer
tests there, and then pull them out one-by-one by linking into the target
position as necessary. It would be nicer to just build the desired fuzzer, but
we need to build the whole nested build as one unit.
[I also tried making systemd and nested meson subproject. This would work
nicely, but meson does not allow that because the nested target names are the
same as the outer project names. If that is ever fixed, that would be the way
to go.]
v2:
- make sure things still work if memory sanitizer is not available
v3:
- switch to syntax which works with meson 0.42.1 found in Ubuntu
Add a new -Dllvm-fuzz=true option that can be used to build against
libFuzzer and update the oss-fuzz script to work outside of the
oss-fuzz build environment.
The fuzz targets are intended to be fast and only target systemd
code, so they don't need to call out to any dependencies. They also
shouldn't depend on shared libraries outside of libc, so we disable
every dependency when compiling against oss-fuzz. This also
simplifies the upstream build environment significantly.
The fuzzers will be used by oss-fuzz to automatically and
continuously fuzz systemd.
This commit includes the build tooling necessary to build fuzz
targets, and a fuzzer for the DNS packet parser.
Currently there is no way to prevent tests from building using meson.
This introduces two problems:
1) It adds a extra 381 files to compile.
2) One of these tests explicitly requires libgcrypt to be built even if systemd
is not using it.
3) It adds C++ to the requirements to build systemd.
When cross-compiling, this is uneccessary.
On a typical system running systemd, the telinit in PATH is very likely to be a symlink
to systemctl. Setting TELINIT to this may result in an infinite recursion if telinit is called
and sd_booted() == 0. This may commonly occur in a chroot environment.
Bug: https://bugs.gentoo.org/642724
[zj:
The path was originally hardcoded as "/lib/upstart/telinit", but was made configurable without
changing the default in 4ad61fd180. Then the default was
changed to `/lib/sysvinit/telinit` in abaaabf40a. Then it
started being autodetected when meson support was added in
5c23128dab. This patch restores the behaviour that was
implemented in configure.ac at the time of its removal.]
This reduces the man=false meson target count from 1281 to 1253.
--
A fully scientific test:
git grep _sources, :/*.build|cut -d: -f2|tr -d ' '|sort|uniq -c
reveals that libudev_sources is the only source list now reused twice. There's
some ugly circular dependency between libudev and libshared, and anyway I'm not
sure if we don't want to use different compilation options (LOG_REALM_…) in
those two cases, so I'm leaving that alone for now.
This reduces the meson man=false target count to 1281.
v2:
- link test-engine with libshared instead of libsystemd_static
Previous version built fine on F27, but fails on F26 with the following error:
/usr/bin/ld: /tmp/ccr8HRGw.ltrans6.ltrans.o: undefined reference to symbol '__start_BUS_ERROR_MAP@@SD_SHARED'
/home/zbyszek/fedora/systemd/systemd-9d5aae75c64f5583a110f03b94816aacc03bbf4d/x86_64-redhat-linux-gnu/src/shared/libsystemd-shared-236.so: error adding symbols: DSO missing from command line
v3:
- add libudev_basic
Instead of compiling those files twice, once for libsystemd and once for
libshared, compile once as a static archive and then link into both.
This reduce the meson target for man=no compile to 1291.
We were including gcrypt-util.[ch] by hand in the few places where it
was used. Create a convenience library to avoid compiling the same
files multiple times.
v2:
- use a separate static library instead of mergin into libbasic
gcrypt_util_sources had to be moved because otherwise they appeared twice
in libshared.so halfproducts, causing an error.
-fvisibility=default is added to libbasic, libshared_static so that the symbols
appear properly in the exported symbol list in libshared.
The advantage is that files are not compiled twice. When configured with -Dman=false,
the ninja target list is reduced from 1588 to 1347 targets. The difference in compilation
time is small (<10%). I think this is because of -O0 and ccache and multiple cores, and
in different settings the compilation time could be reduced. The main advantage is that
errors and warnings are not reported twice.
We of course don't know in which header glibc will export pivot_root()
and if it ever will. But there's a good chance they'll place it where
chroot() is located, given the similarity in the operations, hence let's
try our luck and look for it at the same place.
If we are lucky this means we don't have to patch our code if glibc
decides to expose the call one day.
This reworks how we set _GNU_SOURCE when checking for the availability
of functions:
1. We set it for most of the functions we look for. After all we set it
for our entire built anyway, and it's usually how Linux-specific
definitions in glibc are protected these days. Given that we usually
have checks for such modern stuff only anyway, let's just blanket enable
it.
2. Use "args" instead of "prefix" to set the macro. This is what is
suggested in the meson docs, hence let's do it.
Follow-up for bad7a0c81f501fbbcc79af9eaa4b8254441c4a1f of git
repository for glibc.
Recently glibc added `copy_file_range()`, but to use it,
`_GNU_SOURCE` needs to be defined. This adds the flag in
meson.build to detect the function by meson correctly.
This gets rid of recompilation, making things faster and avoids duplicated warnings.
The result seems to be the same:
$ ls -l build/libsystemd.so.0.20.0 build2/libsystemd.so.0.20.0
-rwxrwxr-x. 1 zbyszek zbyszek 3071312 Dec 19 11:45 build2/libsystemd.so.0.20.0
-rwxrwxr-x. 1 zbyszek zbyszek 3071760 Dec 19 11:11 build/libsystemd.so.0.20.0
$ diff -U1 <(objdump -T build/libsystemd.so.0.20.0|sed -r 's/[0-9a-f]{16}/________________/g') <(objdump -T build2/libsystemd.so.0.20.0|sed -r 's/[0-9a-f]{16}/________________/g')
-build/libsystemd.so.0.20.0: file format elf64-x86-64
+build2/libsystemd.so.0.20.0: file format elf64-x86-64
We already use the "_static" suffix for libshared_static ("shared" is the name
of the library, "static" is the format) and other libs, so let's rename for
consistency.
Also change libsystemd_static_sources to libsystemd_sources, since the same
list is used for both and shorter is better.
Otherwise, setting udev_log=debug in /etc/udev/udev.conf has no effects since
systemd-udevd is built with LOG_REALM=LOG_REALM_UDEV.
However using LOG_REALM_UDEV (for libudev_core) reveals another similar bug for
udevadm which should also define LOG_REALM_UDEV.
We might end up allocating mempools, and when we are unloaded we might
orphan them, thus leaking them. Hence, let's just stick around for good,
so the mempools remain referenced continously and for good, and thus no
memory is leaked (though the memory isn't cleaned up either).
Fixes: #7596
I want to add presets/user/ later. This mirrors the layout for units:
we have units/ and units/user. The advantage is that we avoid having yet
another directory at the top level.
