systemd kernel-install 8 kernel-install Add and remove kernel and initramfs images to and from /boot kernel-install COMMAND OPTIONS KERNEL-VERSION KERNEL-IMAGE INITRD-FILE kernel-install is used to install and remove kernel and initramfs images to and from the boot loader partition, referred to as $BOOT here. It will usually be one of /boot/, /efi/, or /boot/efi/, see below. kernel-install will run the executable files ("plugins") located in the directory /usr/lib/kernel/install.d/ and the local administration directory /etc/kernel/install.d/. All files are collectively sorted and executed in lexical order, regardless of the directory in which they live. However, files with identical filenames replace each other. Files in /etc/kernel/install.d/ take precedence over files with the same name in /usr/lib/kernel/install.d/. This can be used to override a system-supplied executables with a local file if needed; a symbolic link in /etc/kernel/install.d/ with the same name as an executable in /usr/lib/kernel/install.d/, pointing to /dev/null, disables the executable entirely. Executables must have the extension .install; other extensions are ignored. An executable placed in these directories should return 0 on success. It may also return 77 to cause the whole operation to terminate (executables later in lexical order will be skipped). The following commands are understood: add KERNEL-VERSION KERNEL-IMAGE [INITRD-FILE ...] This command expects a kernel version string and a path to a kernel image file as arguments. Optionally, one or more initial RAM disk images may be specified as well (note that plugins might generate additional ones). kernel-install calls the executable files from /usr/lib/kernel/install.d/*.install and /etc/kernel/install.d/*.install (i.e. the plugins) with the following arguments: add KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ KERNEL-IMAGE [INITRD-FILE ...] The third argument directly refers to the path where to place kernel images, initial RAM disk images and other resources for Boot Loader Specification Type #1 entries (the "entry directory"). If other boot loader schemes are used the parameter may be ignored. The ENTRY-TOKEN string is typically the machine ID and is supposed to identify the local installation on the system. For details see below. Two default plugins execute the following operations in this case: kernel-install creates $BOOT/ENTRY-TOKEN/KERNEL-VERSION, if enabled (see $KERNEL_INSTALL_LAYOUT). 50-depmod.install runs depmod8 for the KERNEL-VERSION. 90-loaderentry.install copies KERNEL-IMAGE to $BOOT/ENTRY-TOKEN/KERNEL-VERSION/linux. If INITRD-FILEs are provided, it also copies them to $BOOT/ENTRY-TOKEN/KERNEL_VERSION/INITRD-FILE. It also creates a boot loader entry according to the Boot Loader Specification (Type #1) in $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf. The title of the entry is the PRETTY_NAME parameter specified in /etc/os-release or /usr/lib/os-release (if the former is missing), or "Linux KERNEL-VERSION", if unset. If $KERNEL_INSTALL_LAYOUT is not "bls", this plugin does nothing. remove KERNEL-VERSION This command expects a kernel version string as single argument. This calls executables from /usr/lib/kernel/install.d/*.install and /etc/kernel/install.d/*.install with the following arguments: remove KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ Afterwards, kernel-install removes the entry directory $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ and its contents, if it exists. Two default plugins execute the following operations in this case: 50-depmod.install removes the files generated by depmod for this kernel again. 90-loaderentry.install removes the file $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf. inspect Shows the various paths and parameters configured or auto-detected. In particular shows the values of the various $KERNEL_INSTALL_* environment variables listed below. The partition where the kernels and Boot Loader Specification snippets are located is called $BOOT. kernel-install determines the location of this partition by checking /efi/, /boot/, and /boot/efi/ in turn. The first location where $BOOT/loader/entries/ or $BOOT/ENTRY-TOKEN/ exists is used. The following options are understood: -v --verbose Output additional information about operations being performed. If --verbose is used, $KERNEL_INSTALL_VERBOSE=1 will be exported for plugins. They may output additional logs in this case. $KERNEL_INSTALL_MACHINE_ID is set for the plugins to the desired machine-id to use. It's always a 128-bit ID. Normally it's read from /etc/machine-id, but it can also be overridden via $MACHINE_ID (see below). If not specified via these methods a fallback value will generated by kernel-install, and used only for a single invocation. $KERNEL_INSTALL_ENTRY_TOKEN is set for the plugins to the desired entry "token" to use. It's an identifier that shall be used to identify the local installation, and is often the machine ID, i.e. same as $KERNEL_INSTALL_MACHINE_ID, but might also be a different type of identifier, for example a fixed string or the ID=, IMAGE_ID= values from /etc/os-release. The string passed here will be used to name Boot Loader Specification entries, or the directories the kernel image and initial RAM disk images are placed into. Note that while $KERNEL_INSTALL_ENTRY_TOKEN and $KERNEL_INSTALL_MACHINE_ID are often set to the same value, the latter is guaranteed to be a valid 32 character ID in lowercase hexadecimals while the former can be any short string. The entry token to use is read from /etc/kernel/entry-token, if it exists. Otherwise a few possible candidates below $BOOT are checked for Boot Loader Specification Type 1 entry directories, and if found the entry token is derived from that. If that is not successful, $KERNEL_INSTALL_MACHINE_ID is used as fallback. $KERNEL_INSTALL_BOOT_ROOT is set for the plugins to the absolute path of the root directory (mount point, usually) of the hierarchy where boot loader entries, kernel images, and associated resources should be placed. This usually is the path where the XBOOTLDR partition or the ESP (EFI System Partition) are mounted, and also conceptually referred to as $BOOT. Can be overridden by setting $BOOT_ROOT (see below). $KERNEL_INSTALL_LAYOUT=bls|other|... is set for the plugins to specify the installation layout. Defaults to bls if $BOOT/ENTRY-TOKEN exists, or other otherwise. Additional layout names may be defined by convention. If a plugin uses a special layout, it's encouraged to declare its own layout name and configure layout= in install.conf upon initial installation. The following values are currently understood: bls Standard Boot Loader Specification Type #1 layout, compatible with systemd-boot7: entries in $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION[+TRIES].conf, kernel and initrds under $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ Implemented by 90-loaderentry.install. other Some other layout not understood natively by kernel-install. $KERNEL_INSTALL_INITRD_GENERATOR is set for plugins to select the initrd generator. This may be configured as initrd_generator= in install.conf, see below. $KERNEL_INSTALL_STAGING_AREA is set for plugins to a path to a directory. Plugins may drop files in that directory, and they will be installed as part of the loader entry, based on the file name and extension. $KERNEL_INSTALL_CONF_ROOT can be set to override the location of the configuration files read by kernel-install. When set, install.conf, entry-token, and other files will be read from this directory. $KERNEL_INSTALL_PLUGINS can be set to override the list of plugins executed by kernel-install. The argument is a whitespace-separated list of paths. KERNEL_INSTALL_PLUGINS=: may be used to prevent any plugins from running. $MACHINE_ID can be set for kernel-install to override $KERNEL_INSTALL_MACHINE_ID, the machine ID. $BOOT_ROOT can be set for kernel-install to override $KERNEL_INSTALL_BOOT_ROOT, the installation location for boot entries. The last two variables may also be set in install.conf. Variables set in the environment take precedence over the values specified in the config file. If every executable returns 0 or 77, 0 is returned, and a non-zero failure code otherwise. /usr/lib/kernel/install.d/*.install /etc/kernel/install.d/*.install Drop-in files which are executed by kernel-install. /usr/lib/kernel/cmdline /etc/kernel/cmdline /proc/cmdline Read by 90-loaderentry.install. The content of the file /etc/kernel/cmdline specifies the kernel command line to use. If that file does not exist, /usr/lib/kernel/cmdline is used. If that also does not exist, /proc/cmdline is used. $KERNEL_INSTALL_CONF_ROOT may be used to override the path. /etc/kernel/tries Read by 90-loaderentry.install. If this file exists a numeric value is read from it and the naming of the generated entry file is slightly altered to include it as $BOOT/loader/entries/MACHINE-ID-KERNEL-VERSION+TRIES.conf. This is useful for boot loaders such as systemd-boot7 which implement boot attempt counting with a counter embedded in the entry file name. $KERNEL_INSTALL_CONF_ROOT may be used to override the path. /etc/kernel/entry-token If this file exists it is read and used as "entry token" for this system, i.e. is used for naming Boot Loader Specification entries, see $KERNEL_INSTALL_ENTRY_TOKEN above for details. $KERNEL_INSTALL_CONF_ROOT may be used to override the path. /etc/machine-id The content of this file specifies the machine identification MACHINE-ID. /etc/os-release /usr/lib/os-release Read by 90-loaderentry.install. If available, PRETTY_NAME= is read from these files and used as the title of the boot menu entry. Otherwise, Linux KERNEL-VERSION will be used. /usr/lib/kernel/install.conf /etc/kernel/install.conf Configuration options for kernel-install, as a series of KEY=VALUE assignments, compatible with shell syntax, following the same rules as described in os-release5. /etc/kernel/install.conf will be read if present, and /usr/lib/kernel/install.conf otherwise. This file is optional. $KERNEL_INSTALL_CONF_ROOT may be used to override the path. Currently, the following keys are supported: MACHINE_ID=, BOOT_ROOT=, layout=, initrd_generator=. See the Environment variables section above for details. machine-id5, os-release5, depmod8, systemd-boot7, Boot Loader Specification